{"product_id":"hamgeek-zusdr-mini-sdr-development-board-kit-4-core-1-3g-cpu-compatible-with-pluto-replacement-for-fmcomms3","title":"HamGeek ZUSDR MINI SDR Development Board Kit 4-Core 1.3G CPU Compatible with Pluto Replacement for FMCOMMS3","description":"\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003cbr\u003e- High performance 4-core 1.3G main frequency CPU\u003cbr\u003e- Adopting for XCZU3EG master chip\u003cbr\u003e- 154K for FPGA resources\u003cbr\u003e- IIO up to 40Msps sampling rate\u003cbr\u003e- Higher performance, compatible with Pluto\u003cbr\u003e- Migration for FMCOMMS3 firmware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaster Chip Parameters:\u003c\/strong\u003e\u003cbr\u003e- Model: XCZU3EG-2SFVC784I\u003cbr\u003e- Chip level: industrial level\u003cbr\u003e- Recommended max. Speed for clock: 775M is recommended for PLL\/MMCM\u003cbr\u003e- PS application processor model: 4-core ARM cortex-A53 1333MHz main frequency\u003cbr\u003e- PS real-time processor model: dual-core ARM cortex-R5 533MHz main frequency\u003cbr\u003e- DDR specification and model: DDR4, MT40A512M16LY-075:E; PS terminal, 2GB capacity, 32bit width, 2400M\u003cbr\u003e- Logical unit (LC): 154K\u003cbr\u003e- Lookup table (LUT): 71K\u003cbr\u003e- DSP unit multiplier: 360pcs\u003cbr\u003e- Trigger (Flip Flops): 141K\u003cbr\u003e- Block Ram: 7.6Mbit\u003cbr\u003e- Temperature range: -40℃ ~ 85℃\u003cbr\u003e- Speed level: -2\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZUSDR MINI Functional Interfaces:\u003c\/strong\u003e\u003cbr\u003e- Development board power supply: powered through a dedicated TYPE-C interface, 9-12V DC-IN interface, which has PD 9V function\u003cbr\u003e- Development board clock: 33.33M (PS), 50M (PL), 26M (PS GTR)\u003cbr\u003e- Ethernet: gigabit RTL8211E-VL, PS GEM3\u003cbr\u003e- USB interface: USB3.0 SLAVE, support USB3.0 virtual network port\u003cbr\u003e- Debugger: onboard UART + JTAG (FTDI solution) support ARM and FPGA development\u003cbr\u003e- Onboard power monitor: AD7291 chip, used to monitor various peripheral power sources of AD9361\u003cbr\u003e- EEPROM: one FM24C02 EEPROM\u003cbr\u003e- SD card slot: SD1 of PS, 2.0 interface, can be started (SD support up to 32G)\u003cbr\u003e- EMMC memory: SD0 of PS, MKEV008GCB-SC510, 8GByte\u003cbr\u003e- LED and button: power on\/off button, PS\/PL button (currently not functional, reserved), status indication, AD9361 power indication, etc\u003cbr\u003e- Start setting switch: a BOOT dip switch for startup settings\u003cbr\u003e- Onboard FLASH: 32MByte, model MT25QU256ABA1EW9-OSIT\u003cbr\u003e- Expansion IO port: out of 40 IOs, 34 x 1.8V single-ended HP BANK IOs and 6 x 3.3V single ended HD BANK IOs do not support voltage adjustment. Strictly equal in length. The connector uses 60P X0802WVS-60AS-LPV01\u003cbr\u003e- External power supply interface: 1\u003cbr\u003e- Note 1: Except for DC-IN which can provide power, all TYPE-C are suspended without power supply function, so there is no need to worry about accidental insertion.\u003cbr\u003e- Note 2: The external LDO interface SMA can meet the power supply needs of low-power front-end LNA or low-power PA modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAD9361 Parameters:\u003c\/strong\u003e\u003cbr\u003e- Master chip model: AD9361bbcz\u003cbr\u003e- RF range: 70MHz - 6.0GHz\u003cbr\u003e- Signal data bandwidth: 200K - 56MHz\u003cbr\u003e- Transceiving channels: 2-channel transmitting and 2-channel receiving, IQ modulation, support simultaneous transmission of 4 sets of data\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRF Part Functional Interface Parameters:\u003c\/strong\u003e\u003cbr\u003e- Antenna interface: SMA female connector\u003cbr\u003e- IQ data sampling rate:\u003cbr\u003e  Gigabit Ethernet port: constrained by the gigabit network port limit, about 28 - 29Msps;\u003cbr\u003e  USB3.0: RNDIS about 5Msps, NCM mode up to 40Msps\u003cbr\u003e- Factory firmware driver: for ADI official lib iio (based on ZCU102 + FMCOMMS3 migration)\u003cbr\u003e- Clock: default using 1pcs 40MHz\/5ppm passive crystal oscillator; and including 1pcs 40MHz\/0.5ppm TCXO\u003cbr\u003e- Power monitor: 2 x TX_MON interface, IPEX interface\u003cbr\u003e- RF front-end balun: model TCM1-63AX+, bandwidth 10MHz-6.0GHz\u003cbr\u003e- RF LDO linear power supply: wireless LO power supply 1.3V\/1.5A power supply 2-channel LDO\u003cbr\u003e- Impedance control: RF front-end to SMA antenna, control 50ohms microstrip line\u003cbr\u003e- Note 1: For Windows, it is recommended to prioritize the use of gigabit networks, which have higher performance.\u003cbr\u003e- Note 2: USB3.0 port mode can be set, and RNDIS mode has better compatibility than NCM mode.\u003cbr\u003e- Note 3: NCM mode can only be used for Linux, with a sampling rate efficiency of up to 40MSPS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek Development Board\u003cbr\u003e- 1 x Type-C 2.0 Data Cable\u003cbr\u003e- 1 x Type-C 3.0 Data Cable\u003cbr\u003e- 2 x Acrylic (installed on the development board)\u003cbr\u003e- 1 x Heat Dissipation Module (installed on the development board)\u003cbr\u003e- 1 x Set of Nylon Screws and Stud (installed on the development board)\u003cbr\u003e- 1 x 9V\/2A Power Adapter\u003cbr\u003e- 1 x SMA Adapter Cable\u003cbr\u003e- 1 x FM Telescopic Antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecaution:\u003c\/strong\u003e\u003cbr\u003e- For IIO Scope instruction: \u003ca href=\"https:\/\/wiki.analog.com\/resources\/tools-software\/linux-software\/iio_oscilloscope\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/wiki.analog.com\/resources\/tools-software\/linux-software\/iio_oscilloscope\u003c\/a\u003e\u003cbr\u003e- Please contact us for development resources after receiving the product.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91870-01.jpg?v=1769064500\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91870-02.jpg?v=1769064502\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91870-03.jpg?v=1769064502\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91870-04.jpg?v=1769064502\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91870-05.jpg?v=1769064503\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91870-06.jpg?v=1769064503\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":47420050964645,"sku":"91870","price":629.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91870-1.jpg?v=1769064600","url":"https:\/\/www.hgeek.com\/tr\/products\/hamgeek-zusdr-mini-sdr-development-board-kit-4-core-1-3g-cpu-compatible-with-pluto-replacement-for-fmcomms3","provider":"HAMGEEK Official Store","version":"1.0","type":"link"}