By HAMGEEK

HAMGEEK 5W usDX SDR QRP Transceiver QCX-SSB to SSB 15m/20m/40m 3-Band Bluetooth All Mode HF Transceiver

Preço normal $88.00
Preço normal Preço promocional $88.00
Frete calculado no checkout.
Versions: HAMGEEK USDX-CW
Availability: 2000 in stock
SKU: 91976
Preço normal $88.00
Preço normal Preço promocional $88.00

Advantages:
* Not less than 5W in 15m, 20m and 40m bands
* With a firmware upgrade interface. Through this interface, you can update the firmware for HAMGEEK USDX-CW or HAMGEEK USDX-FT8 transceiver
* With an aluminum alloy housing
* Later, the firmware of CW and FT8 versions can be flashed for each other

Attention:
* Menu 8.6 is the CAT data switch. Please turn it off when FT8 is not used.
* When the firmware is for CW version, please turn off the CAT data switch in menu 8.6 to avoid the screen displaying incomplete frequency text (mainly due to a bug in the firmware).
* The FT8 version is added with Bluetooth function. If you want to use the Bluetooth, you must ensure that menu 8.6 CAT data switch is turned on. The physical Bluetooth switch on the radio only controls the power supply of the Bluetooth.

About Bluetooth:
* The CW and FT8 versions support Bluetooth.
* CW version: Turn off the Bluetooth function if you do not want to use it.
* FT8 version: Menu 8.6 CAT data switch should be turned on. At the same time, the radio in Bluetooth mode should be powered by the physical Bluetooth switch. In this way, the radio's Bluetooth function can be used.

Description:
HAMGEEK USDX SDR QRP transceiver is a 3-band HF transceiver. It is optimized and modified based on the open-source work uSDX/QCX-SSB. The open source URL is: https://github.com/threeme3/usdx.

It supports 15m, 20m and 40m bands. The HF transceiver supports USB, LSB, CW, AM and FM (AM and FM modes are complimentary features from open source authors. AM mode has poor practical results, and the FM function late program has not been developed yet).

The transmit power of HAMGEEK transceiver is up to 5W at 13.8V. Using TCXO, its operating frequency stability is up to 0.5PPM.

List of Features:
* Simple, fun and versatile QRP SSB HF transceiver with embedded DSP and SDR functions
* EER class-E driven SSB transmit-stage
* Approximately 5W PEP SSB output from 13.8V supply
* All-mode support: USB, LSB, CW, AM, FM
* DSP filters: 4000, 2500, 1700, 500, 200, 100, 50 Hz passband
* DSP features: Automatic Gain Control (AGC), Noise-reduction (NR), Voice-triggered Xmit (VOX), RX Attenuator (ATT), TX noise gate, TX drive control, Volume control, dBm/S-meter
* SSB opposite side-band/carrier suppression transmit: better than -45dBc, IMD3 (two-tone) -33dBc, receive: better than -50dBc
* Open source firmware, built with Ar-duino IDE; allows experimentation, new features can be added, contributions can be shared via Github, software-complexity: 2000 lines of code
* Software-based VOX that can be used as fast Full Break-In (QSK and semi-QSK operation) or assist in RX/TX switching for operating digital modes (no CAT or PTT interface required), external PTT output/PA control with TX-delay
* Simple hardware design with only 4 ICs, a micro-controller and few transistors/passives
* Lightweight and low-cost transceiver design: because of the EER-transmitter class-E stage it is highly power-efficient (no bulky heatsinks required), and has a simple design (no complex balanced linear power amplifier required)
* Fully digital and software-based SSB transmit-stage: samples microphone-input and reconstruct a SSB-signal by controlling the phase of the SI5351 PLL (through tiny frequency changes over 800kbits/s I2C) and the amplitude of the PA (through PWM of the PA key-shaping circuit)
* Fully digital and software-based SDR receiver-stages (optionally): samples I/Q (complex) signal from Quadrature Sampling Detector digital mixer, and performs a 90-degree phase-shift mathematically in software (Hilbert-transform) and cancels out one side-band by adding them
* Three independent switchable analog front-end receiver attenuators (0dB, -13dB, -20dB, -33dB, -53dB, -60dB, -73dB)
* Receiver Noise floor MDS: –135 dBm at 28MHz (in 200Hz BW)
* Receiver Front-end selectivity: steep -45dB/decade roll-off +/-2kHz from tuned-frequency
* Blocking dynamic range: 20kHz offset 123dB, 2kHz offset 78dB
* CW decoder, Straight/Iambic-A/B keyer
* VFO A/B + RIT and Split, and corresponding relay band-filter switching via I2C
* CAT support (TS480 subset), possibility to stream audio, keys, display-text over CAT
* Optional SWR/Power measurement and PA efficiency/overload control
* Probably the most cost effective and easy to build standalone SDR/SSB transceiver that you can find. Very much simplified circuit and versatile in use

Schematic:

Specifications:
* Working voltage: DC 13.8V 2A (Note: it is easy to burn out the radio if the voltage is too high)
* DC power plug specifications: 5.5*2.1 (Attention: Positive inside and negative outside. Reverse connection is not allowed)
* Operating frequency band: 40m, 20m and 15m bands
* Receiver sensitivity: ≥-100dbm
* Transmit power: 5W
* Audio output power: 2W
* Headphone jack: With
* Morse key jack: With (Plug specification is 3.5mm. It supports manual and automatic CW keys, set by yourselves in the menu. Manual CW key is supported by default)
* Antenna interface type: BNC

Description of the Functions of the USDX Menu:
Common menu function keys and options:
1.1. Volume preamplifier
1.2. Mode selection
1.3. Bandpass selection
1.4. Band selection
1.8. Gain attenuation for receiving
1.12. Display category selection
2.2. Sidetone frequencies 600Hz and 700Hz
2.4. Transmit and receive delay ON
2.5. Speed of automatic CW keyer
2.6. Selection of CW key types
2.7. Left/right hand habit selection
2.8. ON is for Morse code trainer, and OFF is for TX
2.9. Sidetone volume 0-16
3.1. Voice-activated PTT
3.2. Voice-activated sensitivity
3.3. Voice-activated volume
4.1. Automatic call interval time
4.2. Automatic calls
8.1. Minimum voltage of the grid of transmitting tube: 0-255
8.2. Maximum voltage of the grid of transmitting tube
8.3. Reference frequency adjustment. TCXO 0.5PPM generally does not need to be adjusted
8.6. CAT data switch. It should be turned off if FT8 is not used.

Package Included:
* 1 x HamGeek transceiver
* 1 x Handheld microphone
* 1 x Power adapter

Packaging Details:
* Weight: 0.6kg

FAQ:
Q: Does the product include batteries? What is the capacity of the battery?
A: The product does not contain batteries. The HamGeek transceiver should be plugged into DC 12V or 13.8V. The voltage should not be too high because it is easy to burn out the radio.

Note:
* Batteries are not included in the package.

Payment methods

We accept the following forms of payment:

    Credit Card (Visa, MasterCard, American Express, JCB)
    PayPal
    Bank Transfer (Please contact us Hamgeek@163.com for details)

Delivery and Shipping Fee

Shipping Services & Shipping Fee

Orders will be shipped by 4PX(10-20days Delivery time),if you need ship by Express shipping etc. DHL,FeDex,UPS,Please pay extra fee . Due to air transportation restrictions, package only contains battery is not accept by shipping company.
If your order does not qualify for free shipping,our service department will contact you for shipping fee details within 2 days after order placed.

Shipping Notice

For special shipping requests, please contact service department by email (HamGeek@163.com) or whatsapp. Please confirm your address before payment. If you enter the wrong address, please contact us in a timely manner. We will contact logistics personnel to solve the problem. If you ask to change the address after the order has been shipped, we cannot guarantee that your order will be updated. In addition, you are responsible for all possible risks and expenses caused by changing the address after the order has been shipped.

When you place an order, be sure to enter the correct name, address, and contact information so that we can deliver your items successfully.If you need order to be shipped by Express or the package weight is over 2kg that only can be sent by Express shipping,Please offer VAT number before order processed.

Delivery Time
Total delivery time is composed of two parts: processing time and actual shipping time.
Processing time refers to the time from when your payment is received to when we collect and pack your order. Our processing takes 1-2 working days normally. The second part is the actual shipping time. This is the time that it takes for the package to be delivered by the couriers to the major destination. All goods will be shipping via air mail.

Please make sure the Zip code and city name is correct( corresponding), otherwise the order processing will be delayed untill correct information provided.

In order to process your order quickly, we strongly recommend you to use the same address for your shipping address and billing address. Otherwise, your order will bedelayed for further verification.

Tariff or Customs Duties
All listings's price not included the tariff or customs duties as this part of fee various in different countries,if you have any requirments of decleration value, please contact us before order processed.