HamGeek Z7ADDALite High Speed ADDA Sub Card Module DAC Signal Source Electronic Competition Signal Processing Development Board
Nie można załadować gotowości do odbioru
Master Chip Parameter:
- Master chip model: XC7Z020-2CLG484I
- Chip level: industrial
- Clock recommended maximum speed: for FPGA PLL/MMCM recommended up to 628M
- PS application processor model: for ZYNQ on-chip hardcore processor, dual core Cortex-A9, main frequency of 766M
- DDR specification model: 1024MByte (1GB), 32 bit width, 1066M data rate, MT41K256M16TW-107
- Logic unit (LC): 85K
- Lookup table (LUT): 53200
- DSP unit multiplier: 220
- Trigger (FlipFlops): 106400
- Ram: 4.9MBit
- Component temperature range: industrial -40℃ to 85℃
- Speed level: -2
Functional Interfaces:
- Development power supply: power supply through DC-IN, 9-12V input; device power supply about 8-9W
- ADC/DAC channel: 2 channels 250MSPS/14bit ADC, op amp input, impedance of 50ohms; 2 channels 1.2GSPS/16bit DAC, op amp input, impedance of 50ohms
- Development board clock: 33.33M(PS) + 50M(PL) logic clock; 10M(TCXO-0.5PPM) + AD9516 clock chip (AD DA)
- External clock: AD9516-3 reserved external clock input, IPEX1 interface
- Serial port/JTAG: one FT2232HQ two-in-one, support UART/JTAG
- Ethernet interface: one PS gigabit RTL8211E-VL
- Expansion IO port: one BTB connector, model of X0802WVS-60AS-LPV01, lead out 40 IOs, 4 pair of differential/32 single-ended, voltage can be modified
- LED and button: POR reset/PL_RSTN button/USR/PWR/DONE indicator
- Startup setting switch: one BOOT dip switch for startup settings
- Onboard FLASH: 16M bytes, model of W25Q128FVSIG
- SD interface: one SD interface of TF card slot, support SD boot
- EEPROM: onboard a 24C02, PL terminal
- Synchronization/trigger: one TRIG pin, IPEX interface
- Note 1: Extended IO ports supports 4 pairs of differential and 2.5V LVDS_25.
- Note 2: Expand IO ports with 32 single-ended IO ports, and differential wiring is not supported.
- Note 3: ADC input defaults to AC coupling, can be changed to DC, DAC defaults to DC output.
AD9643 Parameters:
- Master chip model: AD9643BCPZ-250
- Resolution: 14Bit
- Signal data bandwidth: up to 250MHz
- Channel number: 2-channel
- Power supply voltage: 1.8V
- SNR: 70.6dB
- Signal terminal: configuration interface is SPI interface, data interface is LVDS parallel port
- Front-end op amp bandwidth: 1.9G
- Integral nonlinearity: 3.5LSB
- Component level: industrial, -40℃ to 85℃
AD9122 Parameters:
- Master chip model: AD9122BCPZ
- DAC resolution: 16Bit
- Maximum sampling rate: 1200MHz (data input up to 600MHz, interpolation achieves higher values)
- Channel numbers: 2 channels
- Power supply voltage: 1.8V - 3.47V
- Signal terminal: configuration interface is SPI interface, data interface is LVDS parallel port
- Front-end op amp bandwidth: 1.5G
- Integral nonlinearity: 3.7LSB
- Component level: industrial, -40℃ to 85℃
Package Included:
- 1 x HamGeek Development Board
- 1 x Type-C USB2.0 Data Cable
- 1 x SMA Cable
- 1 x DC5.5-12V Power Supply
We accept the following forms of payment:
Credit Card (Visa, MasterCard, American Express, JCB)
PayPal
Bank Transfer (Please contact us Hamgeek@163.com for details）
Delivery and Shipping Fee
Shipping Services & Shipping Fee
Orders will be shipped by 4PX(10-20days Delivery time),if you need ship by Express shipping etc. DHL,FeDex,UPS,Please pay extra fee . Due to air transportation restrictions, package only contains battery is not accept by shipping company.
If your order does not qualify for free shipping,our service department will contact you for shipping fee details within 2 days after order placed.
Shipping Notice
For special shipping requests, please contact service department by email (HamGeek@163.com) or whatsapp. Please confirm your address before payment. If you enter the wrong address, please contact us in a timely manner. We will contact logistics personnel to solve the problem. If you ask to change the address after the order has been shipped, we cannot guarantee that your order will be updated. In addition, you are responsible for all possible risks and expenses caused by changing the address after the order has been shipped.
When you place an order, be sure to enter the correct name, address, and contact information so that we can deliver your items successfully.If you need order to be shipped by Express or the package weight is over 2kg that only can be sent by Express shipping,Please offer VAT number before order processed.
Delivery Time
Total delivery time is composed of two parts: processing time and actual shipping time.
Processing time refers to the time from when your payment is received to when we collect and pack your order. Our processing takes 1-2 working days normally. The second part is the actual shipping time. This is the time that it takes for the package to be delivered by the couriers to the major destination. All goods will be shipping via air mail.
Please make sure the Zip code and city name is correct( corresponding), otherwise the order processing will be delayed untill correct information provided.
In order to process your order quickly, we strongly recommend you to use the same address for your shipping address and billing address. Otherwise, your order will bedelayed for further verification.
Tariff or Customs Duties
All listings's price not included the tariff or customs duties as this part of fee various in different countries,if you have any requirments of decleration value, please contact us before order processed.