HamGeek 7010+AD9363 SDR Development Board Kit PS/PL Expansion IO Software Defined Radio for PlutoSDR Mini
Couldn't load pickup availability
Highlights:
- Mini size, compatible with official software
- PS and PL expansion IO, flexible and convenient
- One transmitting and 1 receiving, low cost and lightweight application
- For ZYNQ7010 + AD9363 architecture
Master Chip Parameters:
- Model: XC7Z010-2CLG400I
- Chip level: industrial level
- Recommended max. speed for clock: 628M is recommended for FPGA PLL/MMCM
- PS application processor model: for ZYNQ on-chip hardcore processor, dual-core Cortex-A9, main frequency of 766M
- DDR specification and model: 512MByte, 16bit width, 1066M data rate, MT41K256M16TW-107
- Logical unit (LC): 28K
- Lookup table (LUT): 17600
- DSP unit multiplier: 80pcs
- Trigger (Flip Flops): 35200
- Ram: 2.1Mbit
- Temperature range: -40℃ ~ 85℃
- Speed level: -2
AD9363 Parameters:
- Master chip model: AD9363bbcz
- RF range: 325MHz - 3.8GHz
- Signal data bandwidth: 200K - 20MHz
- Transceiving channels: 2-channel transmitting and 2-channel receiving, IQ modulation (Only using 1 transmitting and 1 receiving for hardware)
RF Part Functional Interface Parameters:
- Antenna interface: SMA female connector
- IQ data sampling rate: USB2.0 interface virtual RNDIS network pot, 5Msps
- Factory firmware driver: for ADI official lib iio (based on official migration for PlutoSDR)
- Clock: 1pcs 40MHz/0.5ppm TCXO
- RF front-end balun: model TCM1-63AX+, bandwidth 10MHz-6.0GHz
- RF LDO linear power supply: wireless LO power supply 1.3V/1.5A power supply 2-channel LDO
- Impedance control: RF front-end to SMA antenna, control 50ohms microstrip line
For PlutoSDR Mini Functional Interfaces:
- Development board power supply: powered through UART serial port, providing 5V input
- Development board clock: 33.33M (PS), 50M (PL), 40M (AD9363)
- USB interface: 1 x USB OTG interface, support USB2.0 virtual network port
- Serial port: 1 x CH340 serial, Type-C, simultaneously used as power supply
- Expansion IO ports: 1 x PS expansion IO port, lead-out SDO/ETHO, 1.8V standard; 1 x PL expansion IO port; 32 x 1.8V single-ended IO
- LED and button: start reset button/DFU upgrade button, USR/PWR/DONE indicators
- Start setting switch: a BOOT dip switch for startup settings
- Onboard FLASH: 32MByte, model MT25QL256ABA1EW9-OSIT
- Debugging interface: 1 x 2.54-6P JTAG pin interface
- Note 1: PL expanding 32 single-ended IOs, which are single-ended wiring and only support the 1.8V single-ended level standard.
- Note 2: The BTB connector of the PL expansion port also includes JTAG signal lead-out.
- Note 3: PS expansion IO allows users to design their own expansion boards to expand SD interfaces and network ports.
Package Included:
- 1 x HamGeek Development Board
- 2 x Type-C 2.0 Data Cable
- 2 x Acrylic (installed on the development board)
- 1 x Set of Nylon Screws and Stud (installed on the development board)
- 1 x SMA Adapter Cable
- 1 x FM Telescopic Antenna
Precaution:
- Please contact us for development resources after receiving the product.
We accept the following forms of payment:
Credit Card (Visa, MasterCard, American Express, JCB)
PayPal
Bank Transfer (Please contact us Hamgeek@163.com for details）
Delivery and Shipping Fee
Shipping Services & Shipping Fee
Orders will be shipped by 4PX(10-20days Delivery time),if you need ship by Express shipping etc. DHL,FeDex,UPS,Please pay extra fee . Due to air transportation restrictions, package only contains battery is not accept by shipping company.
If your order does not qualify for free shipping,our service department will contact you for shipping fee details within 2 days after order placed.
Shipping Notice
For special shipping requests, please contact service department by email (HamGeek@163.com) or whatsapp. Please confirm your address before payment. If you enter the wrong address, please contact us in a timely manner. We will contact logistics personnel to solve the problem. If you ask to change the address after the order has been shipped, we cannot guarantee that your order will be updated. In addition, you are responsible for all possible risks and expenses caused by changing the address after the order has been shipped.
When you place an order, be sure to enter the correct name, address, and contact information so that we can deliver your items successfully.If you need order to be shipped by Express or the package weight is over 2kg that only can be sent by Express shipping,Please offer VAT number before order processed.
Delivery Time
Total delivery time is composed of two parts: processing time and actual shipping time.
Processing time refers to the time from when your payment is received to when we collect and pack your order. Our processing takes 1-2 working days normally. The second part is the actual shipping time. This is the time that it takes for the package to be delivered by the couriers to the major destination. All goods will be shipping via air mail.
Please make sure the Zip code and city name is correct( corresponding), otherwise the order processing will be delayed untill correct information provided.
In order to process your order quickly, we strongly recommend you to use the same address for your shipping address and billing address. Otherwise, your order will bedelayed for further verification.
Tariff or Customs Duties
All listings's price not included the tariff or customs duties as this part of fee various in different countries,if you have any requirments of decleration value, please contact us before order processed.