Di HAMGEEK

HamGeek BOX-6 6m Band Radio 50MHz Digital Communication Radio Supports FT8 JT9 JT10 JT65 WSPR for Ham Radio

Prezzo di listino $79.90
Prezzo di listino Prezzo scontato $79.90
Spese di spedizione calcolate al check-out.
Availability: 1996 in magazzino
SKU: 89739
Prezzo di listino $79.90
Prezzo di listino Prezzo scontato $79.90

Product Introduction:
1. Frequency range: hardware supports 50-54MHz.
2. Mode: Receive for USB mode and -3db bandwidth is about 3KHZ. The transmitter only supports FT8, JT9, JT10, JT65 and WSPR (it does not support FT4 because FT4 effect is average). Voice-only transmission is not supported.
3. Transmit power: about 1-8W (it is possible to be up to 12W) continuously adjustable (you need to adjust the adjustable resistance on the motherboard), and the power amplifier efficiency is about 60%-71% (calculated at the highest power). Additional heat dissipation is required when it i used at a high power.
4. Frequency synthesis clock: using ±2ppm TCXO, with high frequency stability. No need for too much adjustment.
5. Channels: 2 channels. HamGeek BOX-6 supports channel programming, and the written frequency information takes effect immediately. No need to restart the device (You need to connect the serial port on the motherboard. A TTL module and a serial port debugging software should be prepared by yourself. Some serial port debugging software does not work very well, and you need to use several software to try).
6. Single button operation: short press the button to switch channels. Long press to transmit the current channel frequency +1KHz monotone signal for antenna tuning.
7. Small size: The volume without protrusions is about 10cm x 7.6cm x 3.5cm/3.9" x 3" x 1.4".
8. Interface information: power interface: XT60; antenna interface: BNC (port impedance: 50 ohms); audio interface: 3.5mm; serial port: 3pin header (inside the machine).
9. Power supply voltage and current: 10-15.5V (RF power may reach 12W at 15.5V) and recommended 13.8V. 13.8V at 0.4-1.45A (load impedance has a certain impact on it) and receiving standby current is about 0.130A.
10. Trigger mode: VOX.

HamGeek BOX-6 is a "toy box". There are no such cumbersome and basically unused functions. It boasts a dedicated frequency band to better match the circuit. It can handle most frequency modulated communication modes very well, and I think it should be a good choice for getting started in the 6m band. I hope you enjoy this palm-sized box, and I hope it can bring you a good experience in the magic band.

I used my end-of-life CMU200 comprehensive tester to perform a simple test on HamGeek BOX-6:
- Receiving sensitivity: Approx. -111dBm (12dB SINAD)
- Harmonics: Better than - 43+10log(p) db
- The comprehensive tester is very old and the data may not be accurate, so the data above is for reference only, and I have no way to guarantee you. Thus, HamGeek BOX-6 should only be used as a moderation and demodulation experimental tool.

Package Included:
- 1 x Set of 6m Band Radio

Packaging Details:
- G.W.: 0.5kg

User Manual Download

Payment methods

We accept the following forms of payment:

    Credit Card (Visa, MasterCard, American Express, JCB)
    PayPal
    Bank Transfer (Please contact us Hamgeek@163.com for details)

Delivery and Shipping Fee

Shipping Services & Shipping Fee

Orders will be shipped by 4PX(10-20days Delivery time),if you need ship by Express shipping etc. DHL,FeDex,UPS,Please pay extra fee . Due to air transportation restrictions, package only contains battery is not accept by shipping company.
If your order does not qualify for free shipping,our service department will contact you for shipping fee details within 2 days after order placed.

Shipping Notice

For special shipping requests, please contact service department by email (HamGeek@163.com) or whatsapp. Please confirm your address before payment. If you enter the wrong address, please contact us in a timely manner. We will contact logistics personnel to solve the problem. If you ask to change the address after the order has been shipped, we cannot guarantee that your order will be updated. In addition, you are responsible for all possible risks and expenses caused by changing the address after the order has been shipped.

When you place an order, be sure to enter the correct name, address, and contact information so that we can deliver your items successfully.If you need order to be shipped by Express or the package weight is over 2kg that only can be sent by Express shipping,Please offer VAT number before order processed.

Delivery Time
Total delivery time is composed of two parts: processing time and actual shipping time.
Processing time refers to the time from when your payment is received to when we collect and pack your order. Our processing takes 1-2 working days normally. The second part is the actual shipping time. This is the time that it takes for the package to be delivered by the couriers to the major destination. All goods will be shipping via air mail.

Please make sure the Zip code and city name is correct( corresponding), otherwise the order processing will be delayed untill correct information provided.

In order to process your order quickly, we strongly recommend you to use the same address for your shipping address and billing address. Otherwise, your order will bedelayed for further verification.

Tariff or Customs Duties
All listings's price not included the tariff or customs duties as this part of fee various in different countries,if you have any requirments of decleration value, please contact us before order processed.