HamGeek ZUSDR MINI SDR Development Board Kit 4-Core 1.3G CPU Compatible with Pluto Replacement for FMCOMMS3
Impossible de charger la disponibilité du service de retrait
Highlights:
- High performance 4-core 1.3G main frequency CPU
- Adopting for XCZU3EG master chip
- 154K for FPGA resources
- IIO up to 40Msps sampling rate
- Higher performance, compatible with Pluto
- Migration for FMCOMMS3 firmware
Master Chip Parameters:
- Model: XCZU3EG-2SFVC784I
- Chip level: industrial level
- Recommended max. Speed for clock: 775M is recommended for PLL/MMCM
- PS application processor model: 4-core ARM cortex-A53 1333MHz main frequency
- PS real-time processor model: dual-core ARM cortex-R5 533MHz main frequency
- DDR specification and model: DDR4, MT40A512M16LY-075:E; PS terminal, 2GB capacity, 32bit width, 2400M
- Logical unit (LC): 154K
- Lookup table (LUT): 71K
- DSP unit multiplier: 360pcs
- Trigger (Flip Flops): 141K
- Block Ram: 7.6Mbit
- Temperature range: -40℃ ~ 85℃
- Speed level: -2
ZUSDR MINI Functional Interfaces:
- Development board power supply: powered through a dedicated TYPE-C interface, 9-12V DC-IN interface, which has PD 9V function
- Development board clock: 33.33M (PS), 50M (PL), 26M (PS GTR)
- Ethernet: gigabit RTL8211E-VL, PS GEM3
- USB interface: USB3.0 SLAVE, support USB3.0 virtual network port
- Debugger: onboard UART + JTAG (FTDI solution) support ARM and FPGA development
- Onboard power monitor: AD7291 chip, used to monitor various peripheral power sources of AD9361
- EEPROM: one FM24C02 EEPROM
- SD card slot: SD1 of PS, 2.0 interface, can be started (SD support up to 32G)
- EMMC memory: SD0 of PS, MKEV008GCB-SC510, 8GByte
- LED and button: power on/off button, PS/PL button (currently not functional, reserved), status indication, AD9361 power indication, etc
- Start setting switch: a BOOT dip switch for startup settings
- Onboard FLASH: 32MByte, model MT25QU256ABA1EW9-OSIT
- Expansion IO port: out of 40 IOs, 34 x 1.8V single-ended HP BANK IOs and 6 x 3.3V single ended HD BANK IOs do not support voltage adjustment. Strictly equal in length. The connector uses 60P X0802WVS-60AS-LPV01
- External power supply interface: 1
- Note 1: Except for DC-IN which can provide power, all TYPE-C are suspended without power supply function, so there is no need to worry about accidental insertion.
- Note 2: The external LDO interface SMA can meet the power supply needs of low-power front-end LNA or low-power PA modules.
AD9361 Parameters:
- Master chip model: AD9361bbcz
- RF range: 70MHz - 6.0GHz
- Signal data bandwidth: 200K - 56MHz
- Transceiving channels: 2-channel transmitting and 2-channel receiving, IQ modulation, support simultaneous transmission of 4 sets of data
RF Part Functional Interface Parameters:
- Antenna interface: SMA female connector
- IQ data sampling rate:
Gigabit Ethernet port: constrained by the gigabit network port limit, about 28 - 29Msps;
USB3.0: RNDIS about 5Msps, NCM mode up to 40Msps
- Factory firmware driver: for ADI official lib iio (based on ZCU102 + FMCOMMS3 migration)
- Clock: default using 1pcs 40MHz/5ppm passive crystal oscillator; and including 1pcs 40MHz/0.5ppm TCXO
- Power monitor: 2 x TX_MON interface, IPEX interface
- RF front-end balun: model TCM1-63AX+, bandwidth 10MHz-6.0GHz
- RF LDO linear power supply: wireless LO power supply 1.3V/1.5A power supply 2-channel LDO
- Impedance control: RF front-end to SMA antenna, control 50ohms microstrip line
- Note 1: For Windows, it is recommended to prioritize the use of gigabit networks, which have higher performance.
- Note 2: USB3.0 port mode can be set, and RNDIS mode has better compatibility than NCM mode.
- Note 3: NCM mode can only be used for Linux, with a sampling rate efficiency of up to 40MSPS.
Package Included:
- 1 x HamGeek Development Board
- 1 x Type-C 2.0 Data Cable
- 1 x Type-C 3.0 Data Cable
- 2 x Acrylic (installed on the development board)
- 1 x Heat Dissipation Module (installed on the development board)
- 1 x Set of Nylon Screws and Stud (installed on the development board)
- 1 x 9V/2A Power Adapter
- 1 x SMA Adapter Cable
- 1 x FM Telescopic Antenna
Precaution:
- For IIO Scope instruction: https://wiki.analog.com/resources/tools-software/linux-software/iio_oscilloscope
- Please contact us for development resources after receiving the product.
We accept the following forms of payment:
Credit Card (Visa, MasterCard, American Express, JCB)
PayPal
Bank Transfer (Please contact us Hamgeek@163.com for details）
Delivery and Shipping Fee
Shipping Services & Shipping Fee
Orders will be shipped by 4PX(10-20days Delivery time),if you need ship by Express shipping etc. DHL,FeDex,UPS,Please pay extra fee . Due to air transportation restrictions, package only contains battery is not accept by shipping company.
If your order does not qualify for free shipping,our service department will contact you for shipping fee details within 2 days after order placed.
Shipping Notice
For special shipping requests, please contact service department by email (HamGeek@163.com) or whatsapp. Please confirm your address before payment. If you enter the wrong address, please contact us in a timely manner. We will contact logistics personnel to solve the problem. If you ask to change the address after the order has been shipped, we cannot guarantee that your order will be updated. In addition, you are responsible for all possible risks and expenses caused by changing the address after the order has been shipped.
When you place an order, be sure to enter the correct name, address, and contact information so that we can deliver your items successfully.If you need order to be shipped by Express or the package weight is over 2kg that only can be sent by Express shipping,Please offer VAT number before order processed.
Delivery Time
Total delivery time is composed of two parts: processing time and actual shipping time.
Processing time refers to the time from when your payment is received to when we collect and pack your order. Our processing takes 1-2 working days normally. The second part is the actual shipping time. This is the time that it takes for the package to be delivered by the couriers to the major destination. All goods will be shipping via air mail.
Please make sure the Zip code and city name is correct( corresponding), otherwise the order processing will be delayed untill correct information provided.
In order to process your order quickly, we strongly recommend you to use the same address for your shipping address and billing address. Otherwise, your order will bedelayed for further verification.
Tariff or Customs Duties
All listings's price not included the tariff or customs duties as this part of fee various in different countries,if you have any requirments of decleration value, please contact us before order processed.