{"title":"Software Defined Radio","description":"","products":[{"product_id":"pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-for-ethernet","title":"HamGeek PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio","description":"\u003cp\u003e\u003cstrong\u003eFirmware Download Link: \u003c\/strong\u003e\u003ca href=\"https:\/\/github.com\/plutoplus\/plutoplus\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/github.com\/plutoplus\/plutoplus\u003c\/a\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eProduct Overview:\u003c\/strong\u003e\u003cbr\u003ePLUTO+ is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and Micro SD card. It refers to the design for well-known ADI ADALM-PLUTO and improves its shortcomings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- ADC\/DAC: AD9363 (Can hack to AD9361 or AD9364)\u003cbr\u003e- 2 Transmit, 2 Receiving channel\u003cbr\u003e- RF Range: 70MHZ~6GHZ\u003cbr\u003e- Ref Clock: VCTCXO 40MHZ 0.5ppm\u003cbr\u003e- SOC: for Zynq7010 FPGA: 28k\u003cbr\u003e- RAM: 512M\u003cbr\u003e- FLASH: 32M\u003cbr\u003e- USB: 2.0, support OTG\u003cbr\u003e- Ethernet: 1000Mb\u003cbr\u003e- Micro SD can use to boot\u003cbr\u003e- DC IN: 5V±0.5V-2A microUSB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterfaces:\u003c\/strong\u003e\u003cbr\u003ePlease note that all IO levels are 1.8V.\u003cbr\u003e3.1 When using the official firmware for ADI-PlutoSDR, please connect to URST-MI052.\u003cbr\u003e3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46\u003cbr\u003e3.3 When using SD card to boot, please connect SD-H to 1V8\u003cbr\u003e3.4 When using JTAG to debug, please connect JTAG# to GND\u003cbr\u003e3.5 Please connect EXCLK to GND when using external reference clock input\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePTT Key Port:\u003c\/strong\u003e\u003cbr\u003e- PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDFU KEY:\u003c\/strong\u003e\u003cbr\u003e- At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRef CLK input IPEX:\u003c\/strong\u003e\u003cbr\u003e- You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface.\u003cbr\u003e- The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalibrate the Frequency of Built-in VCTCXO:\u003c\/strong\u003e\u003cbr\u003e- The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicro-SD:\u003c\/strong\u003e\u003cbr\u003eSupport booting via SD card, need to connect SD-H jumper to 1V8.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/70208-01.jpg?v=1720059195\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/70208-02.jpg?v=1720059195\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScreenshot of Software:\u003c\/strong\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/70208-03.jpg?v=1720059229\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/70208-04.jpg?v=1720059229\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/70208-05.jpg?v=1720059229\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/70208-06.jpg?v=1720059229\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (PLUTO+ with or without Shell):\u003c\/strong\u003e\u003cbr\u003e- 1 x PLUTO+ SDR radio\u003cbr\u003e- 2 x USB cables\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- G.W.: 0.4kg\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/70208-1A.jpg?v=1720410957\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/103105-01.jpg?v=1782788969\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included (PLUTO+ with 4 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x PLUTO+ SDR radio\u003cbr\u003e- 2 x USB cables\u003cbr\u003e- 1 x 8dBi 2.4GHz\/5GHz\/5.8GHz antenna\u003cbr\u003e- 1 x 5dBi 40MHz-860MHz antenna\u003cbr\u003e- 1 x 40MHz-6GHz telescopic antenna\u003cbr\u003e- 1 x 12dBi 700MHz-2700MHz antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- G.W.: 1kg\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/87343-1A.jpg?v=1720410957\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It is assembled and ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- SD card is not included in the package.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"HAMGEEK","offers":[{"title":"PLUTO+ (with shell)","offer_id":43993293324453,"sku":"70208","price":179.0,"currency_code":"USD","in_stock":false},{"title":"PLUTO+ (with shell) with 4 Antennas","offer_id":43993293357221,"sku":"87343","price":205.0,"currency_code":"USD","in_stock":false},{"title":"PLUTO+ (without shell)","offer_id":47954903924901,"sku":"103105","price":159.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/70208-2A.jpg?v=1720410957"},{"product_id":"hamgeek-hackrf-one-r9-v2-0-0-sdr-radio-software-defined-radio-portapack-h2m-with-3-2-lcd","title":"HamGeek HackRF One R9 V2.0.0 SDR Radio Software Defined Radio + PortaPack H2M with 3.2\" LCD","description":"\u003cp\u003e\u003cstrong\u003eHAMGEEK PortaPack H2M (Only PortaPack H2M):\u003c\/strong\u003e\u003cbr\u003eFeatures:\u003cbr\u003e- PortaPack H2M is an official co-branded licensed version and is sold by HAMGEEK\u003cbr\u003e- PortaPack H2M adds a 10.00MHZ TCXO FOX 5070 crystal oscillator to the original 2nd generation H2\u003cbr\u003e- Supports GPS simulation\u003cbr\u003e- Supports the latest official firmware upgrade\u003c\/p\u003e\n\u003cp\u003eDescription:\u003cbr\u003e- Screen is upgraded to 3.2-inch wide-angle screen, and perfectly supports touch control.\u003cbr\u003e- Maximum 3W speaker amplifier and realize the switch with an earphone. It can be equipped with the required speakers to realize the loudspeaker function. Pure hardware logic implementation does not affect subsequent firmware upgrades. The original version cannot support loudspeaker.\u003cbr\u003e- Upgraded battery socket and equipped with a more suitable battery standard (The built-in lithium battery is 2000mAH). It fits perfectly into the Hackrf. It also supports USB charging and charging status LED display. And it supports the use of button to turn on and off, which is the key to offline use. The original version can only be plugged in and can't be turned on and off.\u003cbr\u003e- Upgraded crystal oscillator is 10.00MHZ TCXO FOX 5070 crystal oscillator. High-precision active crystal oscillator with stronger anti-interference. At the same time, it supports GPS simulation (no need to connect to computer software).\u003cbr\u003e- Combining the feedback of the first generation of key feel issues, the buttons are upgraded to have better feel, and are equipped with keycaps, which are easier to match with your own designed shell. Of course, the first generation of illuminated knobs has also been upgraded to black, which matches the matt black PCB.\u003c\/p\u003e\n\u003cp\u003ePackage Included (Only PortaPack H2M):\u003cbr\u003e- 1 x HAMGEEK PortaPack H2M\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/87344-4.jpg?v=1720434590\" width=\"1200\" alt=\"\"\u003e\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One R9 V2.0.0 SDR Radio + PortaPack H2M (Versions with shell, antenna and USB cable):\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eUpgrades of HackRF One R9:\u003c\/strong\u003e\u003cbr\u003eMAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply.\u003c\/p\u003e\n\u003cp\u003eWith a transparent and drop-resistant shell, the SDR radio is strong enough to resist pressure.\u003c\/p\u003e\n\u003cp\u003eAttention:\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.0 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2M and a FAT32 formatted Micro SD card over 1G.\u003cbr\u003e3. A SD card is provided by us and it stores mayhem_vX.Y.Z files (to help customers implement certain functionality, like the world map, GPS simulator and other functions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party 'Havoc' firmware is really what you'll want to use with it since it contains many more decoders and transmit options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgress of Work:\u003c\/strong\u003e\u003cbr\u003e1. It has completed the program validation prototype.\u003cbr\u003e2. The latest documents in 2017, May are based on improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatching and Replay:\u003c\/strong\u003e\u003cbr\u003e- One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy.\u003cbr\u003e- To create a catching. You just need to enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' Record button and then press the key on the remote.\u003cbr\u003e- Then stop the recording to save it to a SD Card.\u003cbr\u003e- Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone TX:\u003c\/strong\u003e\u003cbr\u003e- Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio\u003cbr\u003ejack simply hold down the right button to push to talk.\u003cbr\u003e- If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Transmitters:\u003c\/strong\u003e\u003cbr\u003e-There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches.\u003cbr\u003e- There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceivers:\u003c\/strong\u003e\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the\u003cbr\u003ePortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch TFT240*320 screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plate\u003cbr\u003e- ROSH process (exported to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version is updated with the latest documents in 2017, May.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls,\u003cbr\u003eheadphone jack, real-time clock, micro SD card slot,\u003c\/p\u003e\n\u003cp\u003eJust add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (put 8-bit mono files in SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText and Time groups transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2...\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell202...)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Language de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" in case of emergency\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with resistive touch panel.\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button.\u003cbr\u003e- Coin battery for preserving settings and date\/time.\u003cbr\u003e- Micro SD card slot for data and code storage\u003cbr\u003e- Some features demonstrated in 2016 February 22 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software, when you put the PortaPack into \"HackRF Mode\".\u003c\/p\u003e\n\u003cp\u003ePortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF,\u003cbr\u003ethe PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference\u003cbr\u003ebetween the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.\u003c\/p\u003e\n\u003cp\u003ePortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePortaPack H2M:\u003c\/strong\u003e\u003cbr\u003eFeatures:\u003cbr\u003e- PortaPack H2M is an official co-branded licensed version and is sold by HAMGEEK\u003cbr\u003e- PortaPack H2M adds a 10.00MHZ TCXO FOX 5070 crystal oscillator to the original 2nd generation H2\u003cbr\u003e- Support GPS simulation\u003cbr\u003e- Support the latest official firmware upgrade\u003c\/p\u003e\n\u003cp\u003eDescription:\u003cbr\u003e- Screen is upgraded to 3.2-inch wide-angle screen, and perfectly supports touch control.\u003cbr\u003e- Maximum 3W speaker amplifier and realize the switch with an earphone. It can be equipped with the required speakers to realize the loudspeaker function. Pure hardware logic implementation does not affect subsequent firmware upgrades. The original version cannot support loudspeaker.\u003cbr\u003e- Upgraded battery socket and equipped with a more suitable battery standard (The built-in lithium battery is 2000mAH). It fits perfectly into the Hackrf. It also supports USB charging and charging status LED display. And it supports the use of button to turn on and off, which is the key to offline use. The original version can only be plugged in and can't be turned on and off.\u003cbr\u003e- Upgraded crystal oscillator is 10.00MHZ TCXO FOX 5070 crystal oscillator. High-precision active crystal oscillator with stronger anti-interference. At the same time, it supports GPS simulation (no need to connect to computer software).\u003cbr\u003e- Combining the feedback of the first generation of key feel issues, the buttons are upgraded to have better feel, and are equipped with keycaps, which are easier to match with your own designed shell. Of course, the first generation of illuminated knobs has also been upgraded to black, which matches the matt black PCB.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\" data-mce-style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\" data-mce-style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With shell + 5 antennas + USB cable):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (PortaPack H2M + HackRF One)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/87345-1.jpg?v=1720434616\" width=\"1200\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With shell + 2 antennas + USB cable):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (PortaPack H2M + HackRF One)\u003cbr\u003e-1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/87346-1.jpg?v=1720434618\" width=\"1200\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With shell + 1 antenna + USB cable):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (PortaPack H2M + HackRF One)\u003cbr\u003e- 1 x 40MHz-6GHz Antenna\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\" data-mce-style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\" data-mce-style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Microphone is not included in the package.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/87347-1.jpg?v=1720434618\" width=\"1200\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With shell + 5 antennas + USB cable + RF LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (PortaPack H2M + HackRF One)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 1 x 50M-6GHz RF LNA Board\u003cbr\u003e- 1 x SMA Cable\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0660\/9318\/7237\/files\/89694-1.jpg?v=1720434619\" width=\"1200\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLNA Description:\u003c\/strong\u003e\u003cbr\u003e- It is a low noise RF amplifier suitable for 50M-6GHz, featuring 20dB gain. With a MicroUSB power supply port, you can plug in a USB data cable to connect it with a computer or other equipment to get it powered. After the power is supplied, the LED light on the product will light up, indicating that it is working now.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLNA Specifications:\u003c\/strong\u003e\u003cbr\u003e- 50M-6GHz RF signal power amplifier, gain 20dB\u003cbr\u003e- With large dynamic range and wide operating frequency range, it is suitable for various types of RF signal amplification with fixed gain\u003cbr\u003e- Wide frequency range, stable gain, low noise figure, and large dynamic range (+20dBm at 1dBP)\u003cbr\u003e- Applicable to all kinds of RF transmission circuits, extending the communication distance\u003cbr\u003e- Shield with anti-reverse protection diode\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"HAMGEEK","offers":[{"title":"Only PortaPack H2M","offer_id":44005035344037,"sku":"87344","price":51.0,"currency_code":"USD","in_stock":false},{"title":"With shell + 1 antenna + USB cable","offer_id":44005035442341,"sku":"87347","price":159.0,"currency_code":"USD","in_stock":false},{"title":"With shell + 2 antennas + USB cable","offer_id":44005035409573,"sku":"87346","price":163.0,"currency_code":"USD","in_stock":false},{"title":"With shell + 5 antennas + USB cable","offer_id":44005035376805,"sku":"87345","price":175.0,"currency_code":"USD","in_stock":false},{"title":"With shell + 5 antennas + USB cable + RF LNA","offer_id":44005035475109,"sku":"89694","price":183.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/87345-2.jpg?v=1742006850"},{"product_id":"hamgeek-adi-pluto-70mhz-6ghz-sdr-software-defined-radio-ad936x-for-libiio-iioscope-sdrsharp-matlab","title":"HamGeek ADI Pluto+ 70Mhz-6Ghz SDR AD936x XC7z020 FPGA for Libiio iioscope SDRsharp Matlab","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eStatement:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e* HamGeek ADI Pluto+ is intended for educational, scientific and hobby use only. Please consciously abide by the laws and regulations of your country or region!\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eFeatures:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e* Using XC7z020-2CLG400I FPGA with 2-core Cortex A9\u003cbr\u003e* The AD9363 RFSOC is turned on in AD9361 mode. The frequency range is 70MHz~6GHz, and the maximum sampling rate is 61.44MHz\u003cbr\u003e* 1GB 32bit wide DDR3 1066MHz frequency\u003cbr\u003e* With 32M QSPI storage, HamGeek ADI Pluto+ supports TF card expansion\u003cbr\u003e* Supports automatic switching of QSPI boot and TF card boot (insert a TF card for TF card boot; remove the card for QSPI boot)\u003cbr\u003e* On-board JTAG circuit and USB to serial port. Only one cable is required to supply power and debug\u003cbr\u003e* Supports USB OTG interface, master and slave. All USB interfaces are TYPE-C interfaces. Supports OTG mode automatic recognition and opens the USB port to supply power\u003cbr\u003e* VCTCXO is used. The initial frequency accuracy is 0.5PPM, and it supports PPS or 10MHz external disciplined oscillator\u003cbr\u003e* Gigabit Ethernet interface\u003cbr\u003e* The design current of all power rails in the digital part is 4A. The current is abundant. AD936x is powered by a ADP1755 high-performance LDO to improve RF performance\u003cbr\u003e* HamGeek ADI Pluto+ is designed with 10 layers of PCB, impedance matching, and signal integrity\u003cbr\u003e* The product adopts a CNC shell to strengthen heat dissipation and ensure strength (the shell version is optional)\u003cbr\u003e* The software interface is libiio. It can be connected to libiio-enabled software such as for iioscope, SDRsharp, Matlab and GNURadio. In addition, you can contact customer service for other signal processing problems\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003ePackage Included (Depending on Selected Version):\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eWith Shell:\u003c\/b\u003e\u003cbr\u003e* 1 x Main unit\u003cbr\u003e* 4 x Antennas\u003cbr\u003e* 2 x USB cables\u003cbr\u003e* 1 x Cable adapter\u003cbr\u003e* 1 x Wrench\u003cbr\u003e* 1 x Network cable\u003cbr\u003e\u003cb\u003e\u003cbr\u003eWithout Shell:\u003c\/b\u003e\u003cbr\u003e* 1 x SDR Board\u003cbr\u003e* 4 x Antennas\u003cbr\u003e* 2 x USB cables\u003cbr\u003e* 1 x Cable adapter\u003cbr\u003e* 1 x Network cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003ePackaging Details (Depending on Selected Version):\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003eWith Shell:\u003cbr\u003e* Package weight: 0.6kg\u003cbr\u003e\u003cbr\u003eWithout Shell:\u003cbr\u003e* Package weight: 0.4kg\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote:\u003cbr\u003e* TF card is not included.\u003cbr\u003e* The hardware version is not compatible with firmware version v0.39. Updating to the latest firmware is not recommended.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg style=\"width: 1200px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/90420\/90497-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1200px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/90420\/90497-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1200px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/90420\/90497-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1200px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/90420\/90497-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1200px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/90497\/90497-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1200px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/90497\/90497-06.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1457px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/90497\/90497-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1235px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/94359\/90497-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1230px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/94359\/90497-09.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"With Shell","offer_id":47844265951397,"sku":"90497","price":159.03,"currency_code":"USD","in_stock":false},{"title":"Without Shell","offer_id":47844265984165,"sku":"102314","price":136.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/90497-9.jpg?v=1740385666"},{"product_id":"hamgeek-hackrf-one-r9-v2-0-0-1mhz-6ghz-software-defined-radio-platform-gps-simulator-w-shell-4-antennas","title":"HamGeek HackRF One R9 V2.0.0 1MHz-6GHz Open Source SDR Software Defined Radio Platform","description":"\u003cp\u003e\u003cstrong\u003eUpgrades of HackRF One R9:\u003c\/strong\u003e\u003cbr\u003eMAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply.\u003c\/p\u003e\n\u003cp\u003eAttention:\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.0 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted MicroSD card over 1G.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (Board Only):\u003c\/strong\u003e\u003cbr\u003e- 1 x HackRF One board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With With Antennas \u0026amp; Shell):\u003c\/strong\u003e\u003cbr\u003e- 1 x HackRF One + shield cover + aluminum alloy shell\u003cbr\u003e- 4 x SMA Antennas (40MHz-6GHz antenna; 2.4G\/5\/5.8G antenna; 70MHz-2700MHz antenna;  40MHz-860MHz antenna)\u003cbr\u003e- 1 x HackRF TCXO PPM0.1 GPS clock module\u003cbr\u003e- 1 x Micro USB cable for LG\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Board Only","offer_id":44144457810085,"sku":"66148","price":112.0,"currency_code":"USD","in_stock":false},{"title":"With Antennas \u0026 Shell","offer_id":44144457842853,"sku":"54687","price":133.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/66148-1.jpg?v=1742007160"},{"product_id":"hackrf-one-r9-v2-0-0-upgraded-portapack-h2-3-2-lcd-with-assembled-shell-usb-cable","title":"HamGeek HackRF One R9 V2.0.0 + Upgraded PortaPack H2 3.2\" LCD with Assembled Shell \u0026 USB Cable","description":"\u003cp\u003e\u003cstrong\u003eUpgrades of HackRF One R9:\u003c\/strong\u003e\u003cbr\u003eMAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply.\u003c\/p\u003e\n\u003cp\u003eAttention:\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.0 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted MicroSD card over 1G.\u003cbr\u003e3. A SD card is provided by us and it stores mayhem_vX.Y.Z files (to help customers implement certain functionality, like the world map, GPS simulator and other functions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party 'Havoc' firmware is really what you'll want to use with it since it contains many more decoders and transmit options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgress of Work:\u003c\/strong\u003e\u003cbr\u003e1. It has completed the program validation prototype.\u003cbr\u003e2. The latest documents in 2017, May are based on improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatching and Replay:\u003c\/strong\u003e\u003cbr\u003e- One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy.\u003cbr\u003e- To create a catching, you just need to enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' Record button and then press the key on the remote.\u003cbr\u003e- Then stop the recording to save it to a SD Card.\u003cbr\u003e- Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone TX:\u003c\/strong\u003e\u003cbr\u003e- Using a 3.5mm audio jack, the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. Plug a microphone into the audio jack and simply hold down the right button to push to talk (microphone is not included in the package).\u003cbr\u003e- It requires that you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Transmitters:\u003c\/strong\u003e\u003cbr\u003e- There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches.\u003cbr\u003e- There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceivers:\u003c\/strong\u003e\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled, it can receive aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch TFT240*320 screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plate\u003cbr\u003e- ROSH process (exported to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version is updated with the latest documents in 2017, May.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock and micro SD card slot.\u003c\/p\u003e\n\u003cp\u003eJust add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (put 8-bit mono files in SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText and Time groups transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2...\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell202...)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Language de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" in case of emergency\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with resistive touch panel.\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button.\u003cbr\u003e- Coin battery for preserving settings and date\/time.\u003cbr\u003e- Micro SD card slot for data and code storage\u003cbr\u003e- Some features demonstrated in 2016 February 22 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software, when you put the PortaPack into \"HackRF Mode\".\u003c\/p\u003e\n\u003cp\u003ePortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.\u003c\/p\u003e\n\u003cp\u003ePortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With 1 Antenna):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (Upgraded PortaPack H2+HackRF One)\u003cbr\u003e- 1 x 40MHz-6GHz Antenna\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Microphone is not included in the package.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e_______________________________________________________________________________\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With 2 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (Upgraded PortaPack H2+HackRF One)\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e_______________________________________________________________________________\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With 5 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (Upgraded PortaPack H2+HackRF One)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e_______________________________________________________________________________\u003cbr\u003e\u003cstrong\u003ePackage Included (With 5 Antennas \u0026amp; LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (Upgraded PortaPack H2+HackRF One)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 1 x LNA Board\u003cbr\u003e- 1 x SMA Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"With 1 Antenna","offer_id":44144502964389,"sku":"69050","price":157.0,"currency_code":"USD","in_stock":false},{"title":"With 2 Antennas","offer_id":44144502997157,"sku":"69051","price":160.0,"currency_code":"USD","in_stock":false},{"title":"With 5 Antennas","offer_id":44144503029925,"sku":"69052","price":175.0,"currency_code":"USD","in_stock":false},{"title":"With 5 Antennas \u0026 LNA","offer_id":44144503062693,"sku":"75253","price":182.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/69050-2.jpg?v=1724417993"},{"product_id":"1mhz-6ghz-assembled-sdr-radio-with-portapack-h2-hackrf-one-r9-v2-0-0-data-cable","title":"HamGeek 1MHz-6GHz Assembled SDR Radio with PortaPack H2 + HackRF One R9 V2.0.0 + Data Cable","description":"\u003cp\u003e\u003cstrong\u003eUpgrades of HackRF One R9:\u003c\/strong\u003e\u003cbr\u003eMAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply.\u003c\/p\u003e\n\u003cp\u003eAttention:\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.0 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted MicroSD card over 1G.\u003cbr\u003e3. A SD card is provided by us and it stores mayhem_vX.Y.Z files (to help customers implement certain functionality, like the world map, GPS simulator and other functions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party 'Havoc' firmware is really what you'll want to use with it since it contains many more decoders and transmit options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgress of Work:\u003c\/strong\u003e\u003cbr\u003e1. It has completed the program validation prototype.\u003cbr\u003e2. The latest documents in 2017, May are based on improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatching and Replay:\u003c\/strong\u003e\u003cbr\u003e- One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy.\u003cbr\u003e- To create a catching. You just need to enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' Record button and then press the key on the remote.\u003cbr\u003e- Then stop the recording to save it to a SD Card.\u003cbr\u003e- Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone TX:\u003c\/strong\u003e\u003cbr\u003e- Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk.\u003cbr\u003e- If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Transmitters:\u003c\/strong\u003e\u003cbr\u003e- There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches.\u003cbr\u003e- There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceivers:\u003c\/strong\u003e\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch TFT240*320 screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plate\u003cbr\u003e- ROSH process (exported to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version is updated with the latest documents in 2017, May.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock and micro SD card slot.\u003c\/p\u003e\n\u003cp\u003eJust add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (put 8-bit mono files in SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText and Time groups transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2...\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell202...)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Language de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" in case of emergency\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with resistive touch panel.\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button.\u003cbr\u003e- Coin battery for preserving settings and date\/time.\u003cbr\u003e- Micro SD card slot for data and code storage\u003cbr\u003e- Some features demonstrated in 2016 February 22 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software, when you put the PortaPack into \"HackRF Mode\".\u003c\/p\u003e\n\u003cp\u003ePortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.\u003c\/p\u003e\n\u003cp\u003ePortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- The product is assembled.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Battery is included.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking List (With 1 Antenna):\u003c\/strong\u003e\u003cbr\u003e-1 x SDR Radio (PortaPack H2+HackRF One)\u003cbr\u003e-1 x Data Cable\u003cbr\u003e-1 x Antenna\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePacking List (With 2 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (PortaPack H2+HackRF One)\u003cbr\u003e- 1 x Data Cable\u003cbr\u003e- 2 x Antennas\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePacking List (With 5 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (PortaPack H2+HackRF One)\u003cbr\u003e- 1 x Data Cable\u003cbr\u003e- 5 x Antennas\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (With 5 Antennas \u0026amp; LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR HackRF One With Portapack H2\u003cbr\u003e- 1 x 20DB 50MHz-6GHz LNA\u003cbr\u003e- 1 x SMA Cable\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 5 x Antennas\u003cbr\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"With 1 Antenna","offer_id":44144562372773,"sku":"68166","price":163.0,"currency_code":"USD","in_stock":false},{"title":"With 2 Antennas","offer_id":44144562405541,"sku":"68167","price":168.0,"currency_code":"USD","in_stock":false},{"title":"With 5 Antennas","offer_id":44144562438309,"sku":"68168","price":176.0,"currency_code":"USD","in_stock":false},{"title":"With 5 Antennas \u0026 LNA","offer_id":44144562471077,"sku":"75252","price":185.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/68168-3.jpg?v=1742006192"},{"product_id":"hamgeek-1mhz-6ghz-black-sdr-radio-kit-hackrf-one-r9-v2-0-0-portapack-h2-data-cable","title":"HamGeek 1MHz-6GHz Black SDR Radio Kit HackRF One R9 V2.0.0 + Portapack H2 + Data Cable","description":"\u003cp\u003e\u003cstrong\u003eUpgrades of HackRF One R9:\u003c\/strong\u003e\u003cbr\u003eMAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply.\u003c\/p\u003e\n\u003cp\u003eAttention:\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.0 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted MicroSD card over 1G.\u003cbr\u003e3. A SD card is provided by us and it stores mayhem_vX.Y.Z files (to help customers implement certain functionality, like the world map, GPS simulator and other functions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party 'Havoc' firmware is really what you'll want to use with it since it contains many more decoders and transmit options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgress of Work:\u003c\/strong\u003e\u003cbr\u003e1. It has completed the program validation prototype.\u003cbr\u003e2. The latest documents in 2017, May are based on improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatching and Replay:\u003c\/strong\u003e\u003cbr\u003e- One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy.\u003cbr\u003e- To create a catching. You just need to enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' Record button and then press the key on the remote.\u003cbr\u003e- Then stop the recording to save it to a SD Card.\u003cbr\u003e- Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone TX:\u003c\/strong\u003e\u003cbr\u003e- Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk.\u003cbr\u003e- If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Transmitters:\u003c\/strong\u003e\u003cbr\u003e- There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches.\u003cbr\u003e- There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceivers:\u003c\/strong\u003e\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch TFT240*320 screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plate\u003cbr\u003e- ROSH process (exported to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version is updated with the latest documents in 2017, May.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock and micro SD card slot.\u003c\/p\u003e\n\u003cp\u003eJust add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (put 8-bit mono files in SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText and Time groups transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2...\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell202...)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Language de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" in case of emergency\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with resistive touch panel.\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button.\u003cbr\u003e- Coin battery for preserving settings and date\/time.\u003cbr\u003e- Micro SD card slot for data and code storage\u003cbr\u003e- Some features demonstrated in 2016 February 22 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software, when you put the PortaPack into \"HackRF Mode\".\u003c\/p\u003e\n\u003cp\u003ePortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.\u003c\/p\u003e\n\u003cp\u003ePortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"With 1 Antenna","offer_id":44144706519205,"sku":"69849","price":162.0,"currency_code":"USD","in_stock":false},{"title":"With 5 Antennas","offer_id":44144706551973,"sku":"69850","price":176.0,"currency_code":"USD","in_stock":false},{"title":"With 5 Antennas \u0026 LNA","offer_id":44144706617509,"sku":"75255","price":185.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/69849-2.jpg?v=1724418087"},{"product_id":"hamgeek-portapack-h2-for-hackrf-one-sdr-0-5ppm-tcxo-1500mah-battery-3-2-lcd-touch-display","title":"HamGeek PortaPack H2 with 3.2\" LCD Touch Display TCXO Battery for HackRF One SDR","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe HackRF screen kit, the second generation upgrade version, has made the following upgrades on the basis of the first generation, and also perfectly supports the official firmware and Havoc firmware, which can be seamlessly upgraded.\u003c\/p\u003e\n\u003cp\u003e2.8-inch screen is upgraded to 3.2-inch wide-angle screen, and it perfectly supports touch. You need to know that the version made with the original materials and going to the logo is only 2.4 inches. With the maximum 3W speaker power amplifier, it achieves switching with headphones.\u003c\/p\u003e\n\u003cp\u003eYou can equip the speakers you need to achieve the external function.\u003c\/p\u003e\n\u003cp\u003ePure hardware logic implementation does not affect subsequent firmware upgrades. The original version cannot support speaker placement.\u003c\/p\u003e\n\u003cp\u003eUpgrade the battery socket. And it is equipped with a more suitable battery. The size is perfectly placed in the Hackrf.\u003c\/p\u003e\n\u003cp\u003eAlso supports USB charging and charging status LED display. And supports the key switch machine, which is the key to offline use. The original version can only be used when plugged in.\u003c\/p\u003e\n\u003cp\u003eIt is not possible to switch the machine to upgrade the crystal to a DIP14 full metal shell high-precision active crystal, with stronger anti-interference! Combined with the key feel problem of the first generation feedback, the key is upgraded to a better feel button, and equipped with a key cap. It is easier to match your own designed shell.\u003c\/p\u003e\n\u003cp\u003eOf course, the first generation illuminated knobs have also been upgraded to black, which more closely matches matte black PCBs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e-1 x PortaPack H2\u003cbr\u003e-1 x Battery\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- HackRF One and the case are not included.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44144731062437,"sku":"67702","price":42.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/67702-1.jpg?v=1724417744"},{"product_id":"hamgeek-hackrf-one-r9-v2-0-0-upgraded-portapack-h2-3-2-lcd-shell-assembled-usb-cable","title":"HamGeek HackRF One R9 V2.0.0 + Upgraded PortaPack H2 3.2\" LCD + Shell Assembled + USB Cable","description":"\u003cp\u003e\u003cstrong\u003eUpgrades of HackRF One R9:\u003c\/strong\u003e\u003cbr\u003eMAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply.\u003c\/p\u003e\n\u003cp\u003eWith a transparent and drop-resistant shell, the SDR radio is strong enough to resist pressure.\u003c\/p\u003e\n\u003cp\u003eAttention:\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.0 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted Micro SD card over 1G.\u003cbr\u003e3. A SD card is provided by us and it stores mayhem_vX.Y.Z files (to help customers implement certain functionality, like the world map, GPS simulator and other functions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and base-band filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party 'Havoc' firmware is really what you'll want to use with it since it contains many more decoders and transmit options.\u003c\/p\u003e\n\u003cp\u003eProgress of Work:\u003cbr\u003e1. It has completed the program validation prototype.\u003cbr\u003e2. The latest documents in 2017, May are based on improvements.\u003c\/p\u003e\n\u003cp\u003eCatching and Replay:\u003cbr\u003e- One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy.\u003cbr\u003e- To create a catching, you just need to enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' Record button and then press the key on the remote.\u003cbr\u003e- Then stop the recording to save it to a SD Card.\u003cbr\u003e- Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003eMicrophone TX:\u003cbr\u003e- Using a 3.5mm audio jack, the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. Plug a microphone into the audio jack and simply hold down the right button to push to talk (microphone is not included in the package).\u003cbr\u003e- It requires that you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones.\u003c\/p\u003e\n\u003cp\u003eOther Transmitters:\u003cbr\u003e-There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches.\u003cbr\u003e- There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage!\u003c\/p\u003e\n\u003cp\u003eReceivers:\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack, you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled, it can receive aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch TFT240*320 screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plate\u003cbr\u003e- ROSH process (exported to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version is updated with the latest documents in 2017, May.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot.\u003c\/p\u003e\n\u003cp\u003eJust add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (put 8-bit mono files in SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText and Time groups transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2...\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell202...)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Language de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" in case of emergency\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with resistive touch panel.\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button.\u003cbr\u003e- Coin battery for preserving settings and date\/time.\u003cbr\u003e- Micro SD card slot for data and code storage\u003cbr\u003e- Some features demonstrated in 2016 February 22 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software, when you put the PortaPack into \"HackRF Mode\".\u003c\/p\u003e\n\u003cp\u003ePortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the base-band header. If your HackRF Blue does not have a base-band header installed, you should have no mechanical problems.\u003c\/p\u003e\n\u003cp\u003ePortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (1 Antenna):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (Upgraded PortaPack H2+HackRF One)\u003cbr\u003e- 1 x 40MHz-6GHz Antenna\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Microphone is not included in the package.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (2 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (Upgraded PortaPack H2+HackRF One)\u003cbr\u003e-1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (5 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Radio (Upgraded PortaPack H2+HackRF One)\u003cbr\u003e-1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"with 1 Antenna","offer_id":44220156248229,"sku":"85777","price":159.0,"currency_code":"USD","in_stock":false},{"title":"with 2 Antennas","offer_id":44220156280997,"sku":"85778","price":163.0,"currency_code":"USD","in_stock":false},{"title":"with 5 Antennas","offer_id":44220156313765,"sku":"85779","price":171.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/85777-2.jpg?v=1727144605"},{"product_id":"hamgeek-xc7a200t-ad9361-b220-mini-software-defined-radio-development-board-replacement-for-hackrf-plutosdr","title":"HamGeek XC7A200T+AD9361 B220 Mini Software Defined Radio Development Board Replacement for HackRF PlutoSDR","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eB210 mini: A cost-effective software defined radio (SDR) experimental platform which is compatible with Ettus Research B210 and uses UHD drivers to maximize compatibility with existing software and development platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking Principle:\u003c\/strong\u003e\u003cbr\u003eAD9361 is a highly integrated RF transceiver chip launched by Analog Devices (ADI), supporting 2X2MIMO applications. The transmission or reception of I\/Q data is reprocessed by the DSP implemented by FPGA and sent to the host or AD9361. The FPGA also converts the data format, packages I\/Q data frames, and communicates with the UHD driver running on the host through the USB3.0 bus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- B210mini supports dual channel simultaneous reception and transmission, i.e. 2X2MIMO support.\u003cbr\u003e- MIMO (Multiple Input, Multiple Output) is a wireless communication technology that uses multiple antennas to simultaneously transmit and receive data, improve data rate, system capacity, resist interference and fading, expand coverage, and achieve spatial multiplexing. It is suitable for mobile communication fields such as LTE, WiFi, 5G, etc.\u003cbr\u003e- The integration of 0.5PPM VCTCXO on the board can achieve GPS signal simulation and 4G\/5G base station experiments without the need for expensive GPSDO clock sources.\u003cbr\u003e- Equipped with a built-in clock PLL, it facilitates the input of external 10MHz and 1PPS synchronization signals.\u003cbr\u003e- Tune within the frequency range of 50MHz to 6GHz, with a maximum real-time processing bandwidth of 56MHz signal.\u003cbr\u003e- USB 3.0 high-speed interface.\u003cbr\u003e- The onboard Artix-7 100T FPGA 100000 Logic Cells support personalized development.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBase Band Performance:\u003c\/strong\u003e\u003cbr\u003e- ADC sampling rate (maximum): 61.44MS\/s\u003cbr\u003e- ADC resolution: 12bits\u003cbr\u003e- ADC SFDR: 78dBc\u003cbr\u003e- DAC sampling rate (maximum): 61.44MS\/s\u003cbr\u003e- DAC resolution: 12bits\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClock Performance:\u003c\/strong\u003e\u003cbr\u003e- Clock frequency precision: +\/-0.5ppm\u003cbr\u003e- External clock interface (1th IPEX): 1\u003cbr\u003e- 1PPS interface (1th IPEX): 1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRF Performance:\u003c\/strong\u003e\u003cbr\u003e- Output power: \u0026gt;10dBm\u003cbr\u003e- IIP3 (at typ NF): -20dBm\u003cbr\u003e- Receive Noise Figure: \u0026lt;8dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Specifications:\u003c\/strong\u003e\u003cbr\u003e- Power consumption (maximum): 2800mW\u003cbr\u003e- USB3.0 Micro-B: 1\u003cbr\u003e- Product size: 89.5 x 63mm\u003cbr\u003e- Motherboard net weight: 50g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Linux System Apps:\u003c\/strong\u003e\u003cbr\u003e- For GNU Radio is an open-source software toolkit that focuses on the design and implementation of Software Defined Radio (SDR) systems. Through graphical interfaces or Python programming, users can build flexible communication systems covering a wide range of application areas, such as broadcasting, satellite communication, and radar. GNU Radio supports various SDR hardware platforms, including B210mini and HackRF. Providing rich signal processing modules, it is a powerful tool for researchers, students, and radio enthusiasts. As an open source project, GNU Radio encourages community collaboration and innovation, providing support for experimentation and development in the field of wireless communication.\u003cbr\u003e- For MATLAB is a powerful scientific computing software widely used in wireless communication research. Its SDR toolbox provides functions and tools for designing and simulating software defined radio systems, supporting various communication standards and hardware platforms.\u003cbr\u003e- For Open5GS is an open-source 5G core network implementation that supports 4G\/5G NSA and 5G SA core network functionality.\u003cbr\u003e- For SDRangel (Software Defined Radio Angel) is an open-source software defined radio (SDR) application designed to provide a wide range of radio signal processing capabilities. This software allows users to use general-purpose hardware such as RTL-SDR, HackRF, B210mini, etc. to transform computers into powerful software defined radio receivers and transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Windows System Apps:\u003c\/strong\u003e\u003cbr\u003e- For SoapySDR is an open-source software defined radio (SDR) device support library developed by Pothosware, providing a unified API that allows developers to easily interact with SDR hardware from different vendors. Supporting multiple devices, running across platforms, with plugin architecture and multi-channel support. Simplified the development and maintenance of SDR applications, allowing for dynamic loading of new device plugins, and providing real-time spectrum analysis and management tools.\u003cbr\u003e- For LabVIEW is a powerful graphical programming tool that can be used for Software Defined Radio (SDR) applications. Its intuitive interface and modular design enable engineers to easily develop and integrate SDR applications, thereby processing radio signals more flexibly.\u003cbr\u003e- For Matlab and SDRangel can both run on Windows systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek 7A200T AD9361 Motherboard\u003cbr\u003e\u003cbr\u003e- CNC Shell (Optional)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89916-01.jpg?v=1730767256\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89916-02.jpg?v=1730767257\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89916-03.jpg?v=1730767256\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89916-04.jpg?v=1730767256\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89916-05.jpg?v=1730767341\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"without Shell","offer_id":44431280013477,"sku":"89916","price":459.0,"currency_code":"USD","in_stock":false},{"title":"with CNC Shell","offer_id":44431280046245,"sku":"89877","price":485.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89916-1.jpg?v=1730778967"},{"product_id":"hamgeek-1mhz-6ghz-hackrf-one-r9-portapack-h2-v2-0-1-sdr-radio-w-built-in-speaker-1-antenna-usb-cable","title":"HamGeek 1MHz-6GHz HackRF One R9 V2.0.1 + Portapack H2 SDR Radio with Built-in Speaker + Antenna + USB Cable","description":"\u003cp\u003e\u003cstrong\u003eUpgrades of HackRF One R9:\u003c\/strong\u003e\u003cbr\u003eMAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply.\u003c\/p\u003e\n\u003cp\u003eAttention:\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.1 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted Micro SD card over 1G.\u003cbr\u003e3. A SD card is provided by us and it stores mayhem_vX.Y.Z files (to help customers implement certain functionality, like the world map, GPS simulator and other functions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackrf One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party 'Havoc' firmware is really what you'll want to use with it since it contains many more decoders and transmit options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgress of Work:\u003c\/strong\u003e\u003cbr\u003e1. It has completed the program validation prototype.\u003cbr\u003e2. The latest documents in 2017, May are based on improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatching and Replay:\u003c\/strong\u003e\u003cbr\u003e- One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy.\u003cbr\u003e- To create a catching. You just need to enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' Record button and then press the key on the remote.\u003cbr\u003e- Then stop the recording to save it to a SD card.\u003cbr\u003e- Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone TX:\u003c\/strong\u003e\u003cbr\u003e- Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk.\u003cbr\u003e- If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Transmitters:\u003c\/strong\u003e\u003cbr\u003e-There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches.\u003cbr\u003e- There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceivers:\u003c\/strong\u003e\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch 240*320 TFT screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plate\u003cbr\u003e- ROSH process (exported to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version is updated with the latest documents in 2017, May.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, and micro SD card slot.\u003c\/p\u003e\n\u003cp\u003eJust add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast processors (for ARM) in your HackRF. No computer is necessary (except for reprogramming firmware).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (put 8-bit mono files in SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText and Time groups transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2...\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell202...)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Language de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" in case of emergency\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with resistive touch panel\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button\u003cbr\u003e- Coin battery for preserving settings and date\/time\u003cbr\u003e- Micro SD card slot for data and code storage\u003c\/p\u003e\n\u003cp\u003eSome features demonstrated in 2016 February 22 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software, when you put the PortaPack into \"HackRF Mode\".\u003c\/p\u003e\n\u003cp\u003ePortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.\u003c\/p\u003e\n\u003cp\u003ePortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One will not replace your handheld ham radio receiver. Receiving sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- The product is assembled.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Battery is included.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e_______________________________________________________________________________\u003cbr\u003e\u003cstrong\u003ePackage Included (1 Antenna):\u003c\/strong\u003e\u003cbr\u003e-1 x HamGeek SDR Radio (HackRF One R9 + PortaPack H2)\u003cbr\u003e-1 x USB Cable\u003cbr\u003e-1 x Telescopic Antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (1 Antenna):\u003c\/strong\u003e\u003cbr\u003e- Volume weight: 1kg\u003cbr\u003e_______________________________________________________________________________\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (2 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (HackRF One R9 + PortaPack H2)\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 2 x Antennas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (2 Antennas):\u003c\/strong\u003e\u003cbr\u003e- Volume weight: 1kg\u003cbr\u003e_______________________________________________________________________________\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (5 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (HackRF One R9 + PortaPack H2)\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 5 x Antennas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (5 Antennas):\u003c\/strong\u003e\u003cbr\u003e- Volume weight: 1.5kg\u003cbr\u003e_______________________________________________________________________________\u003cbr\u003e\u003cstrong\u003ePackage Included (5 Antennas + LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (HackRF One R9 + Portapack H2)\u003cbr\u003e- 1 x 20DB 50MHz-6GHz LNA\u003cbr\u003e- 1 x SMA Cable\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 5 x Antennas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (5 Antennas + LNA):\u003c\/strong\u003e\u003cbr\u003e- Weight: 1kg\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"1 Antenna","offer_id":44365944914085,"sku":"92219","price":169.0,"currency_code":"USD","in_stock":false},{"title":"2 Antennas","offer_id":44365944946853,"sku":"92220","price":173.0,"currency_code":"USD","in_stock":false},{"title":"5 Antennas","offer_id":44365944979621,"sku":"92301","price":176.0,"currency_code":"USD","in_stock":false},{"title":"5 Antennas + LNA","offer_id":44365945012389,"sku":"92218","price":185.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92219-2.jpg?v=1742006561"},{"product_id":"hamgeek-zynq7020-ad9361-ad9363-sdr-development-board-for-openwifi-neptune-adi-pluto-sdr","title":"HamGeek Zynq7020 + AD9361\/AD9363 SDR Development Board for Openwifi Neptune ADI Pluto SDR","description":"\u003cp\u003e\u003cspan style=\"background-color: rgb(255, 255, 0); color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eHamGeek P210 SDR Development Board:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eNew Upgrades:\u003c\/strong\u003e\u003cbr\u003e- TCXO: 0.5ppm high accuracy\u003cbr\u003e- High performance power supply for Texas Instruments\u003cbr\u003e- Type-C interface\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- HAMGEEK P210 is a completely upgraded SDR\u003cbr\u003e- Supports for ZED-FMCOMMS2-3\/Openwifi\/Pluto SDR\u003cbr\u003e- Supports host computer development (for official host computer\/Matlab\/GUN Raido, etc.)\u003cbr\u003e- ZYNQ-XC7Z020-CLG400i + AD9361 + 2r2t\u003cbr\u003e- With a Gigabit Ethernet port\u003cbr\u003e- 512M DDR3\u003cbr\u003e- Plug and play. Supports secondary development\u003cbr\u003e- FPGA model: xc7z020-clg400\u003cbr\u003e- RF chip model: AD9361\u003cbr\u003e- Memory capacity: 512MB 16bit\u003cbr\u003e- Supports Gigabit Ethernet port and ZED+FMCOMMS2-3 routine\u003cbr\u003e- Supports for Plutosdr routine, and supports 2r2t\u003cbr\u003e- Lower price. The radio signal transmission and reception performance is better than that of Plutosdr\u003cbr\u003e- FPGA resources are three times larger than those of Plutosdr. It also incorporates more complex baseband algorithms\u003cbr\u003e- Equipped with Gigabit Ethernet interface. Sampling bandwidth can reach 10mps (Plutosdr 5mps)\u003cbr\u003e- Supported host computers: For SDR#, MATLAB, GNU Radio and SDRWIN and other SDR software and official test software for ADI\u003cbr\u003e- At present, HamGeek has ported the software and HDL corresponding to fmcomms2, fmcomms3, 2r2t, Openwifi, Pluto SDR, adrv9364 and other hardware. This means that you can seamlessly integrate the tutorials of the above official hardware and the projects that require the above hardware. This is a cost-effective solution for the AD9361. You can use the official host computer as well as MATLAB and GNU Radio to do your own host computer development\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- RFIC: For ADI AD9361 2r2t, 2X2 MIMO. Frequency: 70M~6G (AD9361). 20M instantaneous bandwidth (AD9361)\u003cbr\u003e- Baseband processing: ZYNQ7020, 512MBYTE DDR3; 256MBit QSPI\u003cbr\u003e- Interface: RJ45 GIGA ETH, one-way SD card slot, and USB TYPE-C CONSEL\u003cbr\u003e- Clock: Initial accuracy is 0.5ppm. VCTCXO dynamically adjusts the clock via digital PLL. The accuracy can be better than +\/-5ppb\u003cbr\u003e- API: ADI11O (pre-installed in the factory), C\/C++ and PYTHON\u003cbr\u003e- Size: 76mm x 100mm\/3\" x 3.9\"\u003cbr\u003e- Power supply: USB TYPE-C powered\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports SDR Kits for More Applications:\u003c\/strong\u003e\u003cbr\u003eHAMGEEK is committed to providing users with a more professional and versatile SDR platform. And we have made the following efforts, and there will be more projects and software support in the future.\u003c\/p\u003e\n\u003cp\u003eFirmware Migration:\u003cbr\u003e1. For PlutoSDR and ZED+FMCCOMS\u003c\/p\u003e\n\u003cp\u003eOpen Source Project Support (the following are official community support):\u003cbr\u003e1. For openwifi\u003cbr\u003e2. For gps_sdr_sim\u003c\/p\u003e\n\u003cp\u003eSoftware Support:\u003cbr\u003e1. For GNURadio\u003cbr\u003e2. For SDR#\u003cbr\u003e3. For SDRangel\u003cbr\u003e4. For Matlab Simulink\u003cbr\u003e5. For Gqrx SDR\u003cbr\u003e6. For STASAGEN\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek P210 Board\u003cbr\u003e- 1 x USB Type-C Data Cable\u003cbr\u003e- 1 x Network Cable\u003cbr\u003e- 2 x Rubber Antennas (2.4G-5.8G)\u003cbr\u003e- 1 x Telescopic Antenna (FM)\u003cbr\u003e- 1 x SMA RF Coaxial Cable\u003cbr\u003e- 1 x 32GB High-speed TF Card\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 0.5kg\u003cbr\u003e___________________________________________________________________________________________________\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cstrong\u003eHamGeek K210 SDR Development Board:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eNew Upgrades:\u003c\/strong\u003e\u003cbr\u003e- TCXO: 0.5ppm high accuracy\u003cbr\u003e- High performance power supply for Texas Instruments\u003cbr\u003e- Type-C interface\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- HamGeek K210 is a completely upgraded SDR development board\u003cbr\u003e- Supports for ZED-FMCOMMS2-3\/Openwifi\/Pluto SDR\u003cbr\u003e- Supports host computer development (for official host computer\/Matlab\/GUN Raido, etc.)\u003cbr\u003e- ZYNQ-XC7Z020-CLG400i + AD9361 + 2r2t\u003cbr\u003e- 1G 2DDR3\u003cbr\u003e- Plug and play. Supports secondary development\u003cbr\u003e- Supports Gigabit Ethernet port and ZED+FMCOMMS2-3 routine\u003cbr\u003e- Supports for Plutosdr routine, and supports 2r2t\u003cbr\u003e- Lower price. The radio signal transmission and reception performance is better than that of Plutosdr\u003cbr\u003e- UHD firmware migration: higher bandwidth and more applications than Pluto\u003cbr\u003e- FPGA resources are three times larger than those of Plutosdr. It also incorporates more complex baseband algorithms\u003cbr\u003e- Equipped with Gigabit Ethernet interface. Sampling bandwidth can reach 10mps (Plutosdr 5mps)\u003cbr\u003e- Supported host computers: For SDR#, MATLAB, GNU Radio and SDRWIN and other SDR software and official test software for ADI\u003cbr\u003e- At present, HamGeek has ported the software and HDL corresponding to fmcomms2, fmcomms3, 2r2t, Openwifi, Pluto SDR, adrv9364 and other hardware. This means that you can seamlessly integrate the tutorials of the above official hardware and the projects that require the above hardware. This is a cost-effective solution for the AD9361. You can use the official host computer as well as MATLAB and GNU Radio to do your own host computer development\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- RFIC: For ADI AD9361 2r2t, 2X2 MIMO. Frequency: 70M~6G (AD9361). Up to 56M instantaneous bandwidth (AD9361)\u003cbr\u003e- Baseband processing: ZYNQ7020, 1GBYTE 2DDR3; 256MBit QSPI\u003cbr\u003e- Interface: RJ45 GIGA ETH, one-way SD card slot, USB TYPE-C CONSEL and GPIO expansion\u003cbr\u003e- Clock: Initial accuracy is 0.5ppm. VCTCXO dynamically adjusts the clock via digital PLL. The accuracy can be better than +\/-5ppb\u003cbr\u003e- API: USRP, UHD, ADI11O (pre-installed in the factory), C\/C++ and PYTHON\u003cbr\u003e- Size: 85mm x 55mm\/3.4\" x 2.2\"\u003cbr\u003e- Power supply: USB TYPE-C powered\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports SDR Kits for More Applications:\u003c\/strong\u003e\u003cbr\u003eHamGeek is committed to providing users with a more professional and versatile SDR platform. And we have made the following efforts, and there will be more projects and software support in the future.\u003c\/p\u003e\n\u003cp\u003eFirmware Migration:\u003cbr\u003e1. For PlutoSDR and ZED+FMCCOMS\u003cbr\u003e2. UHD: Compared to Pluto, firmware migration in UHD offers higher bandwidth and more applications.\u003c\/p\u003e\n\u003cp\u003eOpen Source Project Support (the following are official community support):\u003cbr\u003e1. For openwifi\u003cbr\u003e2. For gps_sdr_sim\u003c\/p\u003e\n\u003cp\u003eSoftware Support:\u003cbr\u003e1. For GNURadio\u003cbr\u003e2. For SDR#\u003cbr\u003e3. For SDRangel\u003cbr\u003e4. For Matlab Simulink\u003cbr\u003e5. For Gqrx SDR\u003cbr\u003e6. For STASAGEN\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek K210 Board\u003cbr\u003e- 1 x USB Type-C Data Cable\u003cbr\u003e- 1 x Network Cable\u003cbr\u003e- 2 x Rubber Antennas (2.4G-5.8G)\u003cbr\u003e- 1 x Telescopic Antenna (FM)\u003cbr\u003e- 1 x SMA RF Coaxial Cable\u003cbr\u003e- 1 x 32GB High-speed TF Card\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 0.5kg\u003cbr\u003e____________________________________________________________________________________________________________________\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cstrong\u003eHamGeek R210 SDR Development Board:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eNew Upgrades:\u003c\/strong\u003e\u003cbr\u003e- TCXO: 0.5ppm high accuracy\u003cbr\u003e- High performance power supply for Texas Instruments\u003cbr\u003e- Type-C interface\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- HAMGEEK R210 is a completely upgraded SDR\u003cbr\u003e- Supports for ZED-FMCOMMS2-3\/Openwifi\/Pluto SDR\u003cbr\u003e- Supports host computer development (for official host computer\/Matlab\/GUN Raido, etc.)\u003cbr\u003e- ZYNQ-XC7Z020-CLG400i + AD9363 + 2r2t\u003cbr\u003e- With a Gigabit Ethernet port\u003cbr\u003e- 512M DDR3\u003cbr\u003e- Plug and play. Supports secondary development\u003cbr\u003e- FPGA model: xc7z020-clg400\u003cbr\u003e- RF chip model: AD9363\u003cbr\u003e- Memory capacity: 512MB 16bit\u003cbr\u003e- Supports Gigabit Ethernet port and ZED+FMCOMMS2-3 routine\u003cbr\u003e- Supports for Plutosdr routine, and supports 2r2t\u003cbr\u003e- Lower price. The radio signal transmission and reception performance is better than that of Plutosdr\u003cbr\u003e- FPGA resources are three times larger than those of Plutosdr. It also incorporates more complex baseband algorithms\u003cbr\u003e- Equipped with Gigabit Ethernet interface. Sampling bandwidth can reach 10mps (Plutosdr 5mps)\u003cbr\u003e- Supported host computers: For SDR#, MATLAB, GNU Radio and SDRWIN and other SDR software and official test software for ADI\u003cbr\u003e- At present, HamGeek has ported the software and HDL corresponding to fmcomms2, fmcomms3, 2r2t, Openwifi, Pluto SDR, adrv9364 and other hardware. This means that you can seamlessly integrate the tutorials of the above official hardware and the projects that require the above hardware. This is a cost-effective solution for the AD9361. You can use the official host computer as well as MATLAB and GNU Radio to do your own host computer development\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- RFIC: For ADI AD9363 2r2t, 2X2 MIMO. Frequency: 380M~3.8G (AD9363). 20M instantaneous bandwidth (AD9363)\u003cbr\u003e- Baseband processing: ZYNQ7020, 512MBYTE DDR3; 256MBit QSPI\u003cbr\u003e- Interface: RJ45 GIGA ETH, one-way SD card slot, USB TYPE-C CONSEL, and GPIO expansion\u003cbr\u003e- Clock: Initial accuracy is 0.5ppm. VCTCXO dynamically adjusts the clock via digital PLL. The accuracy can be better than +\/-5ppb\u003cbr\u003e- API: ADI11O (pre-installed in the factory), C\/C++ and PYTHON\u003cbr\u003e- Size: 76mm x 100mm\/3\" x 3.9\"\u003cbr\u003e- Power supply: USB TYPE-C powered\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports SDR Kits for More Applications:\u003c\/strong\u003e\u003cbr\u003eHAMGEEK is committed to providing users with a more professional and versatile SDR platform. And we have made the following efforts, and there will be more projects and software support in the future.\u003c\/p\u003e\n\u003cp\u003eFirmware Migration:\u003cbr\u003e1. For PlutoSDR and ZED+FMCCOMS\u003c\/p\u003e\n\u003cp\u003eOpen Source Project Support (the following are official community support):\u003cbr\u003e1. For openwifi\u003cbr\u003e2. For gps_sdr_sim\u003c\/p\u003e\n\u003cp\u003eSoftware Support:\u003cbr\u003e1. For GNURadio\u003cbr\u003e2. For SDR#\u003cbr\u003e3. For SDRangel\u003cbr\u003e4. For Matlab Simulink\u003cbr\u003e5. For Gqrx SDR\u003cbr\u003e6. For STASAGEN\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HAMGEEK R210 Board\u003cbr\u003e- 1 x USB Type-C Data Cable\u003cbr\u003e- 1 x Network Cable\u003cbr\u003e- 2 x Rubber Antennas (2.4G-5.8G)\u003cbr\u003e- 1 x Telescopic Antenna (FM)\u003cbr\u003e- 1 x SMA RF Coaxial Cable\u003cbr\u003e- 1 x 32GB High-speed TF Card\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 0.5kg\u003cbr\u003e____________________________________________________________________________________________________________\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92405-01_5cc9f82e-4c91-4b1b-859b-b58783dfc83d.jpg?v=1734506756\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92405-02.jpg?v=1732763878\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92405-03.jpg?v=1732763878\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92405-04.jpg?v=1732763878\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92405-05.jpg?v=1732763915\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92405-06.jpg?v=1732763915\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92405-07.jpg?v=1732763915\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Zynq7020+AD9361 P210 SDR Development Board","offer_id":44445537796261,"sku":"92405","price":399.0,"currency_code":"USD","in_stock":false},{"title":"Zynq7020+AD9361 K210 SDR Development Board","offer_id":44445537829029,"sku":"92404","price":549.0,"currency_code":"USD","in_stock":false},{"title":"Zynq7020+AD9363 R210 SDR Development Board","offer_id":44445537861797,"sku":"92406","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92404-2.jpg?v=1742009197"},{"product_id":"hamgeek-e310-70mhz-6ghz-sdr-software-defined-radio-ad9361-zynq7020-for-openwifi-dragonos-open5g-phy","title":"HAMGEEK E310 70MHz-6GHz SDR Software Defined Radio AD9361 ZYNQ7020 for Openwifi DragonOS Open5G-PHY","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eHAMGEEK E310 is a professional SDR transceiver. AD9361 for ADI is used as its radio frequency (RF) transceiver chip, supporting the RF frequency range from 70 MHz to 6 GHz. The AD9361 has configurable RF bandwidth up to 56 MHz. And the SDR supports synchronization of multiple AD9361 RF transceiver chips.\u003c\/p\u003e\n\u003cp\u003eThe HAMGEEK software defined radio supports many open source SDR software. For example, it can be used for Openwifi, GUNRadio, SDR#, SDRangel, Matlab Simulink, Gqrx SDR, STASAGEN, DragonOS and SigDigger.\u003c\/p\u003e\n\u003cp\u003eIt supports 2T2R. Thus, HAMGEEK E310 can be applied to various scenarios such as remote sensing, radar detection, digital broadcasting, digital front-end, Zigbee and Wifi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Brand: HAMGEEK\u003cbr\u003e- Model: E310\u003cbr\u003e- RFIC: AD9361 for ADI. Frequency 70M~6G (A9361). Up to 56M instantaneous bandwidth (AD9361)\u003cbr\u003e- Number of channels: 2T2R MIMO\u003cbr\u003e- Baseband processing: ZYNQ7020, dual core for ARM, Cortex-A9 1G Byte DDR3 RAM. 256Mbit QSPI\u003cbr\u003e- Baseband processor: ZYNQ XC7Z020\u003cbr\u003e- Interfaces: one Giga ETH, one USB 2.0, Type C USB-JTAG and USB-UART, and GPIO expansion\u003cbr\u003e- Synchronization: External 10M, PPS inputs\u003cbr\u003e- Clock: VCTCXO with an initial accuracy of 0.5ppm. Dynamically adjusted clock via digital PLL. The accuracy can be better than +\/-5ppb\u003cbr\u003e- API: For ADI IO (pre-installed), C\/C++, and Python\u003cbr\u003e- Dimensions: Board: 100mm x 60mm\/3.9\" x 2.4\"; case: 107.5mm x 64.5mm x 23mm \/ 4.2\" x 2.5\" x 0.9\"\u003cbr\u003e- Power supply: USB TYPE-C powered\u003cbr\u003e- Transmit power: 3dBm (depends on frequency)\u003cbr\u003e- ADC: 12bit 61.44MS\/s\u003cbr\u003e- DAC: 12bit 61.44MS\/s\u003cbr\u003e- Noise figure: \u0026lt; 8db\u003cbr\u003e- Power consumption: 2~6W\u003cbr\u003e- Transmit IQ bandwidth: 10MSPS\u003cbr\u003e- Host interface: 1G ETH\u003cbr\u003e- GPS: None\u003cbr\u003e- External synchronized clock: 10M\/PPS\u003cbr\u003e- Features: Hobbyist development, DIY, and open source code\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSDR Kit for More Applications:\u003c\/strong\u003e\u003cbr\u003eFirmware Porting:\u003cbr\u003e1. For PlutoSDR and ZED+FMCCOMMS\u003c\/p\u003e\n\u003cp\u003eSupported Open Source Projects:\u003cbr\u003e1. For Openwifi\u003cbr\u003e2. For srsRAN\u003cbr\u003e3. For Open5G-PHY\u003cbr\u003e4. For gps_sdr_sim\u003c\/p\u003e\n\u003cp\u003eSupported Software:\u003cbr\u003e1. For GNURadio\u003cbr\u003e2. For SDR#\u003cbr\u003e3. For SDRangel\u003cbr\u003e4. For Matlab Simulink\u003cbr\u003e5. For Gqrx SDR\u003cbr\u003e6. For STASAGEN\u003cbr\u003e7. For DragonOS\u003cbr\u003e8. For SigDigger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HAMGEEK E310 SDR Transceiver\u003cbr\u003e- 1 x Network Cable\u003cbr\u003e- 2 x USB Cables\u003cbr\u003e- 4 x Antennas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 1KG\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/down.hgeek.com\/download\/93159\/93159-E310-AD9361-Rev-1-1-English-Manual.pdf\" style=\"color: rgb(255, 42, 0);\" target=\"_blank\"\u003e\u003cstrong\u003eDownload Software and Manual: \u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/down.hgeek.com\/download\/93159\/93159-software-and-Instructions.zip\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003ehttps:\/\/down.hgeek.com\/download\/93159\/93159-software-and-Instructions.zip\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/down.hgeek.com\/download\/93159\/93159-E310-AD9361-Rev-1-1-English-Manual.pdf\" style=\"color: rgb(255, 42, 0);\" target=\"_blank\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44546121105573,"sku":"93159","price":229.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93159-10.jpg?v=1734595376"},{"product_id":"hamgeek-xc7a100t-ad9361-b210-mini-software-defined-radio-development-kit-replacement-for-hackrf-plutosdr","title":"HamGeek XC7A100T + AD9361 B210 Mini Software Defined Radio Development Kit Replacement for HackRF PlutoSDR","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- B210 mini: A cost-effective software defined radio (SDR) experimental platform that is compatible with Ettus Research B210 and uses UHD drivers to maximize compatibility with existing software and development platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking Principle:\u003c\/strong\u003e\u003cbr\u003e- AD9361 is a highly integrated RF transceiver chip launched by Analog Devices (ADI), supporting 2X2MIMO applications. The transmission or reception of I\/Q data is reprocessed by the DSP implemented by FPGA and sent to the host or AD9361. The FPGA also converts the data format, packages I\/Q data frames, and communicates with the UHD driver running on the host through the USB3.0 bus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- B210 mini supports dual channel simultaneous reception and transmission, i.e. 2X2MIMO support.\u003cbr\u003e- MIMO (Multiple Input, Multiple Output) is a wireless communication technology that uses multiple antennas to simultaneously transmit and receive data, improve data rate, system capacity, resist interference and fading, expand coverage, and achieve spatial multiplexing. It is suitable for mobile communication fields such as LTE, WiFi, 5G, etc.\u003cbr\u003e- The integration of 0.5PPM VCTCXO on the board can achieve GPS signal simulation and 4G\/5G base station experiments without the need for expensive GPSDO clock sources.\u003cbr\u003e- Equipped with a built-in clock PLL, it facilitates the input of external 10MHz and 1PPS synchronization signals.\u003cbr\u003e- Tune within the frequency range of 50MHz to 6GHz, with a maximum real-time processing bandwidth of 56MHz signal.\u003cbr\u003e- USB 3.0 high-speed interface.\u003cbr\u003e- The onboard Artix-7 100T FPGA 100000 Logic Cells support personalized development.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBase Band Performance:\u003c\/strong\u003e\u003cbr\u003e- ADC sampling rate (maximum): 61.44MS\/s\u003cbr\u003e- ADC resolution: 12bits\u003cbr\u003e- ADC SFDR: 78dBc\u003cbr\u003e- DAC sampling rate (maximum): 61.44MS\/s\u003cbr\u003e- DAC resolution: 12bits\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClock Performance:\u003c\/strong\u003e\u003cbr\u003e- Clock frequency precision: +\/-0.5ppm\u003cbr\u003e- External clock interface (1th IPEX): 1\u003cbr\u003e- 1PPS interface (1th IPEX): 1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRF Performance:\u003c\/strong\u003e\u003cbr\u003e- Output power: \u0026gt;10dBm\u003cbr\u003e- IIP3 (at typical NF): -20dBm\u003cbr\u003e- Receive Noise Figure: \u0026lt;8dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Specifications:\u003c\/strong\u003e\u003cbr\u003e- Power consumption (maximum): 2800mW\u003cbr\u003e- USB3.0 Micro-B: 1\u003cbr\u003e- Product size: 89.5 x 63mm\u003cbr\u003e- Motherboard net weight: 50g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Linux System Apps:\u003c\/strong\u003e\u003cbr\u003e- For GNU Radio is an open-source software toolkit that focuses on the design and implementation of Software Defined Radio (SDR) systems. Through graphical interfaces or Python programming, users can build flexible communication systems covering a wide range of application areas, such as broadcasting, satellite communication, and radar. GNU Radio supports various SDR hardware platforms, including B210mini and HackRF. Providing rich signal processing modules, it is a powerful tool for researchers, students, and radio enthusiasts. As an open source project, GNU Radio encourages community collaboration and innovation, providing support for experimentation and development in the field of wireless communication.\u003cbr\u003e- For MATLAB is a powerful scientific computing software widely used in wireless communication research. Its SDR toolbox provides functions and tools for designing and simulating software defined radio systems, supporting various communication standards and hardware platforms.\u003cbr\u003e- For Open5GS is an open-source 5G core network implementation that supports 4G\/5G NSA and 5G SA core network functionality.\u003cbr\u003e- For SDRangel (Software Defined Radio Angel) is an open-source software defined radio (SDR) application designed to provide a wide range of radio signal processing capabilities. This software allows users to use general-purpose hardware such as RTL-SDR, HackRF, B210mini, etc. to transform computers into powerful software defined radio receivers and transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Windows System Apps:\u003c\/strong\u003e\u003cbr\u003e- For SoapySDR is an open-source software defined radio (SDR) device support library developed by Pothosware, providing a unified API that allows developers to easily interact with SDR hardware from different vendors. Supporting multiple devices, running across platforms, with plugin architecture and multi-channel support. Simplified the development and maintenance of SDR applications, allowing for dynamic loading of new device plugins, and providing real-time spectrum analysis and management tools.\u003cbr\u003e- For LabVIEW is a powerful graphical programming tool that can be used for Software Defined Radio (SDR) applications. Its intuitive interface and modular design enable engineers to easily develop and integrate SDR applications, thereby processing radio signals more flexibly.\u003cbr\u003e- For Matlab and SDRangel can both run on Windows systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (Without Shell):\u003c\/strong\u003e\u003cbr\u003e- 1 x 7A100T AD9361 Motherboard\u003cbr\u003e- 2 x USB Cables\u003cbr\u003e- 4 x Antennas\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With Shell):\u003c\/strong\u003e\u003cbr\u003e- 1 x 7A100T AD9361 Motherboard with Shell\u003cbr\u003e- 4 x Antennas\u003cbr\u003e- 1 x Type-C Cable\u003cbr\u003e- 1 x SMA to MMCX Cable\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89917-01.jpg?v=1738632471\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89917-02.jpg?v=1738632471\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89917-03.jpg?v=1738632471\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89917-04.jpg?v=1738632471\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89917-05.jpg?v=1738632471\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Without Shell","offer_id":44790590406821,"sku":"89917","price":249.0,"currency_code":"USD","in_stock":false},{"title":"With Shell","offer_id":44790590439589,"sku":"89878","price":289.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/89878-7.jpg?v=1739261969"},{"product_id":"hamgeek-p210-70mhz-6ghz-sdr-development-board-zynq7020-ad9361-with-open-source-code-for-pluto-sdr","title":"HAMGEEK P210 70MHz-6GHz SDR Development Board ZYNQ7020 AD9361 with Open Source Code for Pluto SDR","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- HAMGEEK P210 is a cost-effective SDR development board\u003cbr\u003e- Open-source code\u003cbr\u003e- Can be run offline\u003cbr\u003e- Supports development via host computers\u003cbr\u003e- Stronger logic capabilities: Integrated dual-core Cortex-A9 processor (766MHz) and 85K logic unit\u003cbr\u003e- 4 ports: ETH, SD card slot, USB-OTG and USB-UART ports make it easy to use during the development process\u003cbr\u003e- Powerful features and better performance: It is for ZED-FMCOMMS2-3\/Open WIFI\/Pluto SDR. It also supports development via an host computer (for official host computer\/Matlab\/GUN Radio, etc.)\u003cbr\u003e- RF IC: AD9361\u003cbr\u003e- Number of channels: 2T2R MIMO\u003cbr\u003e- Baseband processor: For ZYNQ XC7Z020\u003cbr\u003e- DDR3: 512M\u003cbr\u003e- Host interface: 1G ETH\u003cbr\u003e- Transmission data bandwidth with HOST: P210-12MSPS\u003cbr\u003e- Transmission data bandwidth with HOST (burst sampling): 61.44MSPS\u003cbr\u003e- API: For ADl iiO\u003cbr\u003e- Suitable for hobbyists and makers to develop and DIY\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvantages of HAMGEEK P210:\u003c\/strong\u003e\u003cbr\u003e1. RF:\u003cbr\u003e- RF IC: AD9361\u003cbr\u003e- Frequency Range: 70MHz to 6GHz (AD9361)\u003cbr\u003e- RF Channel: 2RT, 2x2 MIMO\u003cbr\u003e- Signal Bandwidth: 200K to 56MHz (AD9361)\u003c\/p\u003e\n\u003cp\u003e2. Data Processing Unit:\u003cbr\u003e- ZYNQ SoC: XC7Z020CLG400i, dual-core cortex-A9 at 766MHz, 85k logic unit\u003cbr\u003e- DDR3 RAM: 1GByte\u003cbr\u003e- QSPI flash: 32MB\u003c\/p\u003e\n\u003cp\u003e3. Interfaces:\u003cbr\u003e- Gigabit Ethernet\u003cbr\u003e- USB2.0 OTG\u003cbr\u003e- SD card slot\u003cbr\u003e- Integrated USB-JTAG, USB-UART\u003cbr\u003e- Expansion ports supported\u003c\/p\u003e\n\u003cp\u003e4. Clock \u0026amp; Power Supply:\u003cbr\u003e- TCXO: 0.5ppm\u003cbr\u003e- Power supply: Powered via USB port\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- FPGA: ZYNQ-XC7Z020-CLG400\u003cbr\u003e- RF chip: AD9361\u003cbr\u003e- Memory: 512MB 16Bit DDR3\u003cbr\u003e- Interfaces: 1G-ETH\/SD-CARD slot\/USB-OTG\/USB-UART\u003cbr\u003e- SMA ports: 2 for TX and 2 for RX\u003cbr\u003e- Hardware frequency range: 70MHz-6GHz\u003cbr\u003e- Signal bandwidth: 200KHz-56MHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HAMGEEK P210 SDR development board\u003cbr\u003e- 2 x USB cables\u003cbr\u003e- 1 x Antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 0.35kg\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44790771974309,"sku":"92302","price":319.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92302-3.jpg?v=1739265612"},{"product_id":"测试-hamgeek-b210-mini-ad9361-software-defined-radio-sdr-replacement-for-hackrf-plutosdr","title":"HamGeek B210 Mini AD9361 Software Defined Radio SDR Replacement for HackRF PlutoSDR","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- B210 mini: A cost-effective software defined radio (SDR) experimental platform that is compatible with Ettus Research B210 and uses UHD drivers to maximize compatibility with existing software and development platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking Principle:\u003c\/strong\u003e\u003cbr\u003e- AD9361 is a highly integrated RF transceiver chip launched by Analog Devices (ADI), supporting 2X2MIMO applications. The transmission or reception of I\/Q data is reprocessed by the DSP implemented by FPGA and sent to the host or AD9361. The FPGA also converts the data format, packages I\/Q data frames, and communicates with the UHD driver running on the host through the USB3.0 bus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- HamGeek B210 mini supports dual channel simultaneous reception and transmission, i.e. 2X2MIMO support.\u003cbr\u003e- MIMO (Multiple Input, Multiple Output) is a wireless communication technology that uses multiple antennas to simultaneously transmit and receive data, improve data rate, system capacity, resist interference and fading, expand coverage, and achieve spatial multiplexing. It is suitable for mobile communication fields such as LTE, WiFi, 5G, etc.\u003cbr\u003e- The integration of 0.5PPM VCTCXO on the board can achieve GPS signal simulation and 4G\/5G base station experiments without the need for expensive GPSDO clock sources.\u003cbr\u003e- Equipped with a built-in clock PLL, it facilitates the input of external 10MHz and 1PPS synchronization signals.\u003cbr\u003e- Tune within the frequency range of 50MHz to 6GHz, with a maximum real-time processing bandwidth of 56MHz signal.\u003cbr\u003e- USB 3.0 high-speed interface.\u003cbr\u003e- The onboard Artix-7 100T FPGA 100000 Logic Cells support personalized development.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBase Band Performance:\u003c\/strong\u003e\u003cbr\u003e- ADC sampling rate (maximum): 61.44MS\/s\u003cbr\u003e- ADC resolution: 12bits\u003cbr\u003e- ADC SFDR: 78dBc\u003cbr\u003e- DAC sampling rate (maximum): 61.44MS\/s\u003cbr\u003e- DAC resolution: 12bits\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClock Performance:\u003c\/strong\u003e\u003cbr\u003e- Clock frequency precision: +\/-0.5ppm\u003cbr\u003e- External clock interface (1th IPEX): 1\u003cbr\u003e- 1PPS interface (1th IPEX): 1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRF Performance:\u003c\/strong\u003e\u003cbr\u003e- Output power: \u0026gt;10dBm\u003cbr\u003e- IIP3 (at typical NF): -20dBm\u003cbr\u003e- Receive Noise Figure: \u0026lt;8dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Specifications:\u003c\/strong\u003e\u003cbr\u003e- Power consumption (maximum): 2800mW\u003cbr\u003e- USB3.0 Micro-B: 1\u003cbr\u003e- Product size: 89.5 x 63mm\u003cbr\u003e- Motherboard net weight: 50g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Linux System Apps:\u003c\/strong\u003e\u003cbr\u003e- GNU Radio is an open-source software toolkit that focuses on the design and implementation of Software Defined Radio (SDR) systems. Through graphical interfaces or Python programming, users can build flexible communication systems covering a wide range of application areas, such as broadcasting, satellite communication, and radar. GNU Radio supports various SDR hardware platforms, including B210mini and HackRF. Providing rich signal processing modules, it is a powerful tool for researchers, students, and radio enthusiasts. As an open source project, GNU Radio encourages community collaboration and innovation, providing support for experimentation and development in the field of wireless communication.\u003cbr\u003e- MATLAB is a powerful scientific computing software widely used in wireless communication research. Its SDR toolbox provides functions and tools for designing and simulating software defined radio systems, supporting various communication standards and hardware platforms.\u003cbr\u003e- Open5GS is an open-source 5G core network implementation that supports 4G\/5G NSA and 5G SA core network functionality.\u003cbr\u003e- SDRangel (Software Defined Radio Angel) is an open-source software defined radio (SDR) application designed to provide a wide range of radio signal processing capabilities. This software allows users to use general-purpose hardware such as RTL-SDR, HackRF, B210mini, etc. to transform computers into powerful software defined radio receivers and transmitters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Windows System Apps:\u003c\/strong\u003e\u003cbr\u003e- SoapySDR is an open-source software defined radio (SDR) device support library developed by Pothosware, providing a unified API that allows developers to easily interact with SDR hardware from different vendors. Supporting multiple devices, running across platforms, with plugin architecture and multi-channel support. Simplified the development and maintenance of SDR applications, allowing for dynamic loading of new device plugins, and providing real-time spectrum analysis and management tools.\u003cbr\u003e- LabVIEW is a powerful graphical programming tool that can be used for Software Defined Radio (SDR) applications. Its intuitive interface and modular design enable engineers to easily develop and integrate SDR applications, thereby processing radio signals more flexibly.\u003cbr\u003e- For Matlab and SDRangel can both run on Windows systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (without Accessory Kit):\u003c\/strong\u003e\u003cbr\u003e- 1 x Motherboard\u003cbr\u003e- 1 x USB3.0 Micro-B Data Cable\u003cbr\u003e- 1 x Telescopic Antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (with Accessory Kit):\u003c\/strong\u003e\u003cbr\u003e- 1 x Motherboard\u003cbr\u003e- 1 x USB3.0 Micro-B Data Cable\u003cbr\u003e- 1 x Acrylic Shell\u003cbr\u003e- 4 x Antennas (6dBi 600MHz-6GHz)\u003cbr\u003e- 1 x 50-ohm Coaxial Cable (20cm)\u003cbr\u003e- 1 x 30DB Attenuator\u003cbr\u003e- 2 x IPEX to SMA Cables (10cm)\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/87764-01.jpg?v=1738637579\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/87764-02.jpg?v=1738637579\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/87764-03.jpg?v=1738637580\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Without Accessory Kit","offer_id":44791201038501,"sku":"87764","price":329.0,"currency_code":"USD","in_stock":false},{"title":"With Accessory Kit","offer_id":44791201071269,"sku":"87765","price":359.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/87765-6.jpg?v=1739265649"},{"product_id":"hamgeek-zedboard-ad9361-module-board-software-defined-radio-sdr-development-platform","title":"HamGeek Zedboard + AD9361 Module Software Defined Radio SDR Development Platform AD-FMComms3-EBZ","description":"\u003cp\u003e\u003cstrong\u003eAD-FMComms3-EBZ Description:\u003c\/strong\u003e\u003cbr\u003eAD-FMCOMMS3-EBZ is a high-speed analog module designed to demonstrate AD9361. It is a high-performance, highly integrated RF transceiver designed for RF applications, such as 3G and 4G base stations and test equipment applications, software-defined radios. The device's programmability and broadband capabilities make it an ideal choice for a variety of transceiver applications. The device integrates an RF front-end and a flexible mixed-signal baseband part, integrates a frequency synthesizer, and provides a configurable digital interface for the processor or FPGA, thereby simplifying design import.\u003c\/p\u003e\n\u003cp\u003eThe operating frequency range of the AD9361 chip is 70 MHz to 6 GHz, covering most of the licensed and unlicensed frequency bands. By programming the AD9361 itself to change the sampling rate, digital filter and decimation parameters, the channel bandwidth supported by the chip is lower than 200 kHz to 56 MHz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZedboard Introduction:\u003c\/strong\u003e\u003cbr\u003eProcessor\u003cbr\u003e* Zynq™-7000 AP SoC XC7Z020-CLG484-100, logical resources are approximately four times that of 7Z010\u003c\/p\u003e\n\u003cp\u003eMemory\u003cbr\u003e* 512 MB DDR3\u003cbr\u003e* 256 Mb Quad-SPI Flash\u003cbr\u003e* 8 GB SD card\u003c\/p\u003e\n\u003cp\u003eCommunication\u003cbr\u003e* Onboard USB-JTAG Programming\u003cbr\u003e* 10\/100\/1000 Ethernet\u003cbr\u003e* USB OTG 2.0 and USB-UART\u003c\/p\u003e\n\u003cp\u003eExpansion\u003cbr\u003e* External connector (68 single-ended or 34 differential I\/Os)\u003cbr\u003e* 5 Pmod™ compatible headers (2x6)\u003cbr\u003e* Agile Mixed Signaling (AMS) header\u003c\/p\u003e\n\u003cp\u003eClock\u003cbr\u003e* 33.33333 MHz clock source for PS\u003cbr\u003e* 100 MHz oscillator for PL\u003c\/p\u003e\n\u003cp\u003eDisplay\u003cbr\u003e* HDMI-compatible output supporting 1080p60 with 16-bit, YCbCr, 4:2:2 mode color\u003cbr\u003e* VGA output (12-bit resolution color)\u003cbr\u003e* 128 x 32 OLED display\u003c\/p\u003e\n\u003cp\u003eConfiguration and Debugging\u003cbr\u003e* Onboard USB-JTAG interface\u003cbr\u003e* JTAG connector\u003c\/p\u003e\n\u003cp\u003eUniversal IO\u003cbr\u003e* 8 user LEDs\u003cbr\u003e* 7 push buttons\u003cbr\u003e* 8 DIP switches\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking List:\u003c\/strong\u003e\u003cbr\u003e* 1 x HamGeek Zedboard Motherboard\u003cbr\u003e* 1 x AD9361 Module Board\u003cbr\u003e* 1 x Set of Accessories\u003cbr\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44791342301349,"sku":"67965","price":1099.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/67965-7.jpg?v=1739265555"},{"product_id":"hamgeek-sdrpi-sdr-platform-software-defined-radio-platform-with-black-aluminum-alloy-shell-ad9361-for-zynq","title":"HamGeek SDRPi SDR Platform Software Defined Radio Platform with Black Aluminum Alloy Shell AD9361 for ZYNQ","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- Commercial chip XC7Z020 CLG400 for ZYNQ or automotive XA7Z020 CLG400 (No program modification and no performance difference. Automotive grade has higher temperature performance).\u003cbr\u003e- Two 512M byte capacity Micron DDR3 memory chips form 1G memory. The actual model is MT41K256M16TW-107:P, which forms a 1GB byte memory device and hangs on the PS for ZYNQ.\u003cbr\u003e- RF Transceiver chip AD9361 is used\u003cbr\u003e- LTM4622 high-efficiency power supply module outputs six sets of voltages\u003cbr\u003e- Two ADP1755 RF-specific LDOs provide a 1.3V power supply to the AD9361\u003cbr\u003e- PGA-102+ RF amplification chip is used\u003cbr\u003e- USB1210 chip implements USB OTG interface\u003cbr\u003e- CP2105 realizes USB to dual serial port, connecting PS and PL respectively\u003cbr\u003e- FT2232HL implements USB to JTAG debugging interface\u003cbr\u003e- TF card adapter chip realizes the level conversion of 1.8V PS interface voltage and 3.3V TF card interface voltage\u003cbr\u003e- W25Q256 FLASH memory chip can realize FLASH boot\u003cbr\u003e- RTL8211EG Gigabit Ethernet is attached to the PL terminal to achieve UDP\/TCP communication through EMIO or an independent protocol stack. We provide our own well-written and efficient UDP\/IP protocol stack\u003cbr\u003e- PL_ETH Ethernet port supports 1000M mode\u003cbr\u003e- PS_ETH Ethernet port supports 10M\/100M\/1000M adaptive mode\u003cbr\u003e- GPS antenna and onboard GPSDO connected to an active GPS antenna can be calibrated\u003cbr\u003e- With GPSDO status indicator\u003cbr\u003e- Chips for several clock circuits, such as clock buffers\u003cbr\u003e- 40M clock input is used for multi-chip SDPPI to achieve clock cascade synchronization\u003cbr\u003e- 40M clock output is used for multi-chip SDRPI to achieve clock cascade synchronization\u003cbr\u003e- Reset button and reset chip are used to reset the entire system for ZYNQ. Its effect is equivalent to plugging and unplugging a power supply\u003cbr\u003e- ESD protection chips are used to protect the chip pins (for ZYNQ) to which the external pin 46 is connected\u003cbr\u003e- Balun conversion chips are used to achieve balanced and unbalanced conversions\u003cbr\u003e- Designed with UART, OTG, PROG ports and SD\/TF card slot\u003cbr\u003e- The USB interface of USB OTG is mostly used as a USB HOST port. It is a Micro USB port, and it can be transferred to a USB A-type port using an adapter cable. It can be connected to regular USB peripherals such as keyboard, mouse, and USB drive (requires the corresponding system for LINUX)\u003cbr\u003e- Power supply input and UART serial port. The interface is TYPE-C, the required voltage is 5V, and the current is not less than 1A. In addition, this port is connected to a USB to dual UART chip, and the two UART ports are for PS and PL respectively\u003cbr\u003e- With K14 and MIO15 indicator lights\u003cbr\u003e- PL_DONE indicator light: The light will be turned on when the PL configuration is complete, regardless of the startup method.\u003cbr\u003e- PWR_OK indicator light: It indicates that the board is powered normally. The board has its power-on sequence. This light will be turned on when all power supplies are stable. This light can be simply thought of as a power indicator light.\u003cbr\u003e- There are two input and output RF ports, with female connectors\u003cbr\u003e- TX1A: RF amplifier enable indicator light\u003cbr\u003e- RA1A: Receiving indicator light (just an indicator light that can be controlled by users)\u003cbr\u003e- TX2A: RF Amplifier Enable indicator light\u003cbr\u003e- RA2A: Receiving indicator light (users can customize to control the light)\u003cbr\u003e- Voltage-controlled, temperature-compensated crystal oscillators, DACs and other devices enable GPSDO\u003cbr\u003e- TF card slot: the maximum physical capacity of supported SD card\/TF card is 32M\u003cbr\u003e- GPS module for implementing GPSDO\u003cbr\u003e- EEPROM memories with l2C interfaces\u003cbr\u003e- CNC machined aluminum alloy shell is used to make the appearance elegant and beautiful, and it is convenient for heat conduction and shielding\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x Set of SDR Platform\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Memory card is not included.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44791427924133,"sku":"77675","price":788.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/77675-2.jpg?v=1742009041"},{"product_id":"hamgeek-usrp-b210-70mhz-6ghz-usb3-0-sdr-software-defined-radio-ad9361-with-ettus-compatible-with-usrp-uhd-b2xx-driver","title":"HamGeek USRP B210 70MHz-6GHz USB3.0 SDR Software Defined Radio AD9361 with ETTUS Compatible with USRP UHD B2XX Driver","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- RF operating range of HamGeek SDR: 70 MHz-6 GHz\u003cbr\u003e- Compatible with USRP UHD B2XX drivers\u003cbr\u003e- It supports for GNU Radio and Pothos SDR\u003cbr\u003e- USB 3.0 high-speed interface\u003cbr\u003e- Micro-B USB3.0 connector\u003cbr\u003e- AD9361 12 bit ADC\/DAC\u003cbr\u003e- CYPRESS CYUSB3014 high-speed USB interface chip\u003cbr\u003e- Spartan6 XC6SLX150 csg\/fgg484 FPGA\u003cbr\u003e- Fully-coherent 2x2 MIMO capability\u003cbr\u003e- Up to 56 MHz of instantaneous bandwidth in 1x1\u003cbr\u003e- Up to 30.72 MHz of instantaneous bandwidth in 2x2\u003cbr\u003e- 2 TX \u0026amp; 2 RX, half-duplex or full-duplex\u003cbr\u003e- Auxiliary power supply can be connected\u003cbr\u003e- GPIO scalability\u003cbr\u003e- JTAG interface\u003cbr\u003e- Expandable OCXC or GPS-DO\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x Set of HamGeek SDR Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- G.W.: 0.5KG\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/60193-01.jpg?v=1738641271\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44791514267813,"sku":"60193","price":749.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/60193-3.jpg?v=1739265529"},{"product_id":"hamgeek-ad9361-rf-70mhz-6ghz-sdr-software-defined-radio-usb3-0-compatible-with-ettus-usrp-b210","title":"HamGeek AD9361 RF 70MHz-6GHz SDR Software Defined Radio USB3.0 Compatible with ETTUS USRP B210","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe USRP B210 provides a fully integrated, single-board, Universal Software Radio Peripheral (USRP™) platform with continuous frequency coverage from 70 MHz – 6 GHz. Designed for low-cost experimentation, it combines the AD9361 RFIC direct-conversion transceiver providing up to 56MHz of real-time bandwidth, an open and reprogrammable Spartan6 FPGA, and fast SuperSpeed USB 3.0 connectivity with convenient bus-power. Full support for the USRP Hardware Driver™ (UHD) software allows you to immediately begin developing with GNU Radio, prototype your own GSM base station with OpenBTS, and seamless transition code from the USRP B210 to higher performance, industry-ready USRP platforms. An enclosure accessory kit is available to users of green PCB devices (revision 6 or later) to assemble a protective steel case.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperimentation with Low-cost SDR\u003c\/strong\u003e\u003cbr\u003eExperiment with the USRP B210 across a wide range of applications including: FM and TV broadcast, cellular, GPS, WiFi, ISM, and more. Users can immediately begin prototyping in GNURadio and participate in the open-source SDR community. Full support by the UHD software allows seamless code reuse from existing designs, compatibility with open-source applications like HDSDR and OpenBTS, and an upgrade path to industry-ready USRP systems to meet application requirements.  Here are some examples of what you can do with a USRP B210.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB210 System Architecture\u003c\/strong\u003e\u003cbr\u003eThe integrated RF frontend on the USRP B210 is designed with the new Analog Devices AD9361, a single-chip direct-conversion transceiver, capable of streaming up to 56 MHz of real-time RF bandwidth. The B210 uses both signal chains of the AD9361, providing coherent MIMO capability. Onboard signal processing and control of the AD9361 is performed by a Spartan6 XC6SLX150 FPGA connected to a host PC using SuperSpeed USB 3.0. The USRP B210 real time throughput is benchmarked at 61.44MS\/s quadrature, providing the full 56 MHz of instantaneous RF bandwidth to the host PC for additional processing using GNU Radio or applications that use the UHD API. For detailed throughput capabilities in various SISO and MIMO configurations, please see the USRP B200\/B210 Benchmark Table.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- First fully integrated, two-channel USRP device with continuous RF coverage from 70 MHz – 6 GHz\u003cbr\u003e- Full duplex, MIMO (2 Tx \u0026amp; 2 Rx) operation with up to 56 MHz of real-time bandwidth (61.44MS\/s quadrature)\u003cbr\u003e- Fast and convenient Super Speed USB 3.0 connectivity\u003cbr\u003e- GNURadio and OpenBTS support through the open-source USRP Hardware Driver (UHD)\u003cbr\u003e- Open and reconfigurable Spartan 6 XC6SLX150 FPGA (for advanced users)\u003cbr\u003e- Early access prototyping platform for the Analog Devices AD9361 RFIC, a fully integrated direct conversion transceiver with mixed signal baseband\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x Software Defined Radio\u003cbr\u003e- 1 x USB3.0 Cable\u003cbr\u003e- 1 x GPIO Cable\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/61046-01.jpg?v=1738647873\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44792115396773,"sku":"61046","price":550.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/61046-2.jpg?v=1742007431"},{"product_id":"hamgeek-70mhz-6ghz-zynq7010-ad9363-sdr-software-defined-radio-development-board-for-pluto-sdr-matlab","title":"HamGeek 70MHz-6GHz Zynq7010+AD9363 SDR Development Board with Shell and Antenna for Pluto SDR MATLAB","description":"\u003cp\u003e\u003cstrong\u003eImprovements:\u003c\/strong\u003e\u003cbr\u003e- Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports.\u003cbr\u003e- Improved power supply stability.\u003cbr\u003e- Adding 9363 external input clock interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- AD9363 chip, replacing AD9361, with frequency range of 70MHz~6GHz. Current laboratory tests show that there is not significant differences between these two chips.\u003cbr\u003e- Board size: about 5 x 8cm\u003cbr\u003e- Peripheral: double DDR, 1GB\u003cbr\u003e- For N25Q128 FLASH, can be used to start.\u003cbr\u003e- One channel SD card, can be used to start.\u003cbr\u003e- Integrated FT2232 debugger, with serial port.\u003cbr\u003e- PS end USB2.0.\u003cbr\u003e- PS end gigabit Ethernet port.\u003cbr\u003e- PL end with crystal oscillator, can drive AD9363 with pure PL.\u003cbr\u003e- Support external input of local oscillator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications of the Zynq7010 Development Board:\u003c\/strong\u003e\u003cbr\u003e- Master chip: XC7Z010CLG400\u003cbr\u003e- RF chip: AD9363ABCZ\u003cbr\u003e- Memory: DDR3 512MB\u003cbr\u003e- Current limit scheme: FUSE 2A\u003cbr\u003e- USB PHY: USB3320\u003cbr\u003e- Storage chip: QSPI 32MB\u003cbr\u003e- Balun: 10MHz - 6GHz\u003cbr\u003e- TCXO: 40MHz, ±0.5PPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupported Software:\u003c\/strong\u003e\u003cbr\u003e- For IIO Oscillscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio.\u003c\/p\u003e\n\u003cp\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (Board With 2 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek Development Board\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 2 x Antennas\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (Board With 1 Antenna):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Development Board\u003cbr\u003e- 1 x Antenna\u003cbr\u003e- 1 x SD Card\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (Board With Shell and 1 Antenna):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR (Development Board + Shell)\u003cbr\u003e- 1 x Antenna\u003cbr\u003e- 1 x SD Card\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Please contact our customer service for firmware resources after receiving the product.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload User Guide:\u003cbr\u003e\u003c\/strong\u003e- For 93267: \u003ca href=\"https:\/\/down.hgeek.com\/download\/92589-93267\/7010_AD936X_SDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/down.hgeek.com\/download\/92589-93267\/7010_AD936X_SDR.pdf\u003c\/a\u003e\u003cbr\u003e- For 99314: \u003ca href=\"https:\/\/down.hgeek.com\/download\/99314\/development-Board-Quick-Start-Guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/down.hgeek.com\/download\/99314\/development-Board-Quick-Start-Guide.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Development Board for PlutoSDR Nano","offer_id":47319943544997,"sku":"99314","price":68.0,"currency_code":"USD","in_stock":false},{"title":"Zynq7010+AD9363 Board","offer_id":47319943577765,"sku":"93267","price":105.0,"currency_code":"USD","in_stock":false},{"title":"Zynq7010+AD9363 Board with Shell","offer_id":47319943610533,"sku":"94225","price":109.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93267-2_472a0d74-7371-4a51-97ef-7e8ebc09d058.jpg?v=1742008989"},{"product_id":"hamgeek-70mhz-6ghz-zynq7020-ad9363-sdr-software-defined-radio-development-board-for-pluto-sdr-matlab","title":"HamGeek Professional 70MHz-6GHz SDR Development Board with Power Amplifier for Pluto SDR (AD9361\/AD9363)","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eWith AD9361 (Fan + Antenna):\u003c\/span\u003e\u003cbr\u003e1. Improvements:\u003c\/b\u003e\u003cbr\u003e- Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports.\u003cbr\u003e- Improved power supply stability.\u003cbr\u003e- Adding 9363 external input clock interface.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e2. Features:\u003c\/b\u003e\u003cbr\u003e- AD9363 chip, replacing AD9361, with frequency range of 70MHz~6GHz. Current laboratory tests show that there is no significant differences between these two chips.\u003cbr\u003e- Board size: about 5 x 8cm\u003cbr\u003e- Peripheral: double DDR, 1GB\u003cbr\u003e- For N25Q128 FLASH, can be used to start.\u003cbr\u003e- One channel SD card, can be used to start.\u003cbr\u003e- Integrated FT2232 debugger, with serial port.\u003cbr\u003e- PS end USB2.0.\u003cbr\u003e- PS end gigabit Ethernet port.\u003cbr\u003e- PL end with crystal oscillator, can drive AD9363 with pure PL.\u003cbr\u003e- Support external input of local oscillator.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e3. Supported Software:\u003c\/b\u003e\u003cbr\u003e- For IIO Oscilloscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e4. Key Parameters:\u003c\/b\u003e\u003cbr\u003e- RFIC: AD9363BBCZ\/AD80305BBCZ\u003cbr\u003e- Processor: XC7Z020-2CLG400I\u003cbr\u003e- LO frequency: 70MHz - 6GHz\u003cbr\u003e- BW: 200K - 20MHz\u003cbr\u003e- RF interface: 2T2R\u003cbr\u003e- DDR3: 1GB\u003cbr\u003e- Flash: 16MB\u003cbr\u003e- 1000\/100\/10M ETH: One (PS)\u003cbr\u003e- UART + JTAG: One (Type-C)\u003cbr\u003e- USB2.0: One (Type-C)\u003cbr\u003e- SD card slots: one\u003cbr\u003e- Extend IO: 1.8V IOx8, 3.3V IOx4\u003cbr\u003e- PTT out: one (5V level)\u003cbr\u003e- RFIC clock: 0.5ppm TCXO\/FPGA\/IPEX (default TCXO)\u003cbr\u003e- Size: 88 x 62 x 22mm (CNC)\u003cbr\u003e- Power supply mode: USB\/JTAG\/XH2.54\u003cbr\u003e\u003cbr\u003e\u003cb\u003e5. Package Included:\u003c\/b\u003e\u003cbr\u003e- 1 x SDR Development Board\u003cbr\u003e- 1 x SD Card (Compatible Pluto firmware installed)\u003cbr\u003e- 1 x Antenna\u003cbr\u003e- 1 x Cooling Fan\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Please contact our customer service for firmware resources and routines after receiving the product.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/98078-01.jpg?v=1757294200\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/98078-02.jpg?v=1757294200\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/98078-03.jpg?v=1757294201\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/98078-04.jpg?v=1757294200\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/98078-05.jpg?v=1757294200\"\u003e\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cstrong\u003eWith AD9361 (Fan + Antenna + TX Amplifier):\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e1. Improvement:\u003c\/strong\u003e\u003cbr\u003e- Strict simulation and impedance control of the RF part, adding PA to increase output power.\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/99311-01.jpg?v=1766369222\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Hardware Peripherals:\u003c\/strong\u003e\u003cbr\u003e- Double 1GB DDR\u003cbr\u003e- N25Q128 FLASH, can be used to start\u003cbr\u003e- One channel SD card, can be used to start\u003cbr\u003e- Integrated FT2232 debugger, with serial port\u003cbr\u003e- PS side USB2.0\u003cbr\u003e- PS side Gigabit Ethernet\u003cbr\u003e- PL side with crystal oscillator, can drive AD9363 with pure PL\u003cbr\u003e- Support external input of local oscillator\u003cbr\u003e- With expansion GPIOs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Supported Software:\u003c\/strong\u003e\u003cbr\u003e- For IIO Oscilloscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Package Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x SDR Development Board\u003cbr\u003e- 1 x Cooling Fan Kit\u003cbr\u003e- 1 x Telescopic Antenna\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/99311-02.jpg?v=1766369220\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/99311-03.jpg?v=1766369220\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/99311-04.jpg?v=1766369218\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/99311-05.jpg?v=1766369218\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/99311-06.jpg?v=1766369217\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/99311-07.jpg?v=1766369276\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/99311-08.jpg?v=1766369276\" alt=\"\"\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cstrong\u003eWith AD9363 (Fan + Antenna):\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e1. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cb\u003eImprovement:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- Strict simulation and impedance control of the RF part, adding PA to increase output power.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101671\/101671-01.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e2. Hardware Peripherals:\u003c\/b\u003e\u003cbr\u003e- Double 1GB DDR\u003cbr\u003e- N25Q128 FLASH, can be used to start\u003cbr\u003e- One channel SD card, can be used to start\u003cbr\u003e- Integrated FT2232 debugger, with serial port\u003cbr\u003e- PS side USB2.0\u003cbr\u003e- PS side Gigabit Ethernet\u003cbr\u003e- PL side with crystal oscillator, can drive AD9361 with pure PL\u003cbr\u003e- Support external input of local oscillator\u003cbr\u003e- With expansion GPIOs\u003cbr\u003e\u003cbr\u003e\u003cb\u003e3. Supported Software:\u003c\/b\u003e\u003cbr\u003e- For IIO Oscilloscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e4. Package Included:\u003c\/b\u003e\u003cbr\u003e- 1 x SDR Development Board\u003cbr\u003e- 1 x Cooling Fan Kit\u003cbr\u003e- 1 x Telescopic Antenna\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101671\/101671-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101671\/101671-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101671\/101671-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101671\/101671-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101671\/101671-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101671\/101671-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 960px;\" src=\"https:\/\/www.comseek.com\/image\/catalog\/101671\/101671-08.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"XC7Z020 With AD9363 (Fan + Antenna)","offer_id":44792498290853,"sku":"98078","price":136.0,"currency_code":"USD","in_stock":false},{"title":"XC7Z020 with AD9363 (Fan + Antenna + TX Amplifier)","offer_id":47319963500709,"sku":"99311","price":149.0,"currency_code":"USD","in_stock":false},{"title":"XC7Z020 With AD9361 (Fan + Antenna)","offer_id":47796615872677,"sku":"101671","price":198.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92589-1.jpg?v=1766368208"},{"product_id":"hamgeek-sdr-radio-software-defined-radio-ad9363-for-zynq7020-adi-pluto-communications-openwifi-zynqsdr","title":"HamGeek SDR Radio Software Defined Radio AD9363 for ZYNQ7020 ADI Pluto Communications Openwifi Zynqsdr","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe HamGeek SDR board is the ideal choice for you if you are planning to use devices for Zedboard + fmcomms3 for learning and project development.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1. Using XC7Z020-2CLG400I chip, 7z020-2I\u003cbr\u003e2. AD9363 chip, replacing AD9361, with frequency range of 70MHz~6GHz and maximum sampling rate 61.44MHz. Current laboratory tests show that there is not significant differences between these two chips\u003cbr\u003e3. PS 1GB DDR3 32bit, frequency 1066M\u003cbr\u003e4. 32MB QSPI Flash, supporting TF card\u003cbr\u003e5. On-board JTAG circuit and USB to serial port, which can be powered and debugged via a single cable\u003cbr\u003e6. Support USB OTG, which can be master or slave. Using USB TYPE-C interface; OTG mode supports automatic identification and opens USB port to supply power\u003cbr\u003e7. Using VCTCXO, initial frequency accuracy is 0.5PPM, supporting PPS and 10MHz external taming\u003cbr\u003e8. Gigabit Ethernet interface\u003cbr\u003e9. All power rails in the digital section are designed for 4A with ample current, and the AD936x is powered by the ADP1755 high-performance LDO to improve RF performance\u003cbr\u003e10. Using 10-layer PCB wiring, impedance matching, and signal integrity design\u003cbr\u003e11. With CNC housing to enhance heat dissipation and ensure strength\u003cbr\u003e12. Power on and ready to use. TF card with pre-burned system files, you can follow the introductory tutorial to start using\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x Set of HamGeek SDR\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- TF card is included.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44792564351141,"sku":"78595","price":290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/78595-5.jpg?v=1742007581"},{"product_id":"hamgeek-malahit-dsp2-sdr-malachite-receiver-w-latest-authorized-firmware-2-40-donut-wb-antenna-transimpedance-amplifier","title":"HamGeek Malahit-DSP2 SDR Malachite Receiver Latest Authorized Firmware 2.40 with\/without Donut Antenna \u0026 Amplifier","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eHamGeek Malahit-DSP2 is a high sensitivity broadband radio receiver based on SDR technology. The receiver adopts an SDR architecture with powerful functions and unique NR noise reduction function, resulting in excellent listening performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Specifications:\u003c\/strong\u003e\u003cbr\u003e- Frequency range: 10kHz-380MHz, 404MHz-2GHz\u003cbr\u003e- Panoramic width: 192kHz, 96kHz, 48kHz\u003cbr\u003e- Modulation type: AM, SSB, DSB, CW, NFM, WFM\u003cbr\u003e- Sensitivity: 0.3uV (up to 1GHz)\u003cbr\u003e- Dynamic bandwidth: 82dB\u003cbr\u003e- Antenna: 50ohm with SMA male connector\u003cbr\u003e- High impedance mode\u003cbr\u003e- Biased three-way active antenna\u003cbr\u003e- Built-in preamplifier\u003cbr\u003e- Power supply: 5000mAh lithium-ion battery\u003cbr\u003e- Screen: 3.5-inch touch LCD\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware Features:\u003c\/strong\u003e\u003cbr\u003e- Adjustable filter width\u003cbr\u003e- Adaptive Noise Reduction (NR)\u003cbr\u003e- Threshold noise reduction\u003cbr\u003e- Noise Canceller (NB)\u003cbr\u003e- Automatic Gain Control (AGC)\u003cbr\u003e- Automatic Notch Filter (ANF)\u003cbr\u003e- Stereo FM supports RDS analog stereo\u003cbr\u003e- Equalizer\u003cbr\u003e- Original firmware, support official website upgrade\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications of Optional Donut WB Antenna:\u003c\/strong\u003e\u003cbr\u003e- Frequency: 10K - 180MHz\u003cbr\u003e- Connector: SMA male connector\u003cbr\u003e- Net weight: 19g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications of Optional Transimpedance Amplifier:\u003c\/strong\u003e\u003cbr\u003e- Frequency: 10K - 180MHz\u003cbr\u003e- Charging interface: Type-C\u003cbr\u003e- Charging current: 1A\u003cbr\u003e- Charging voltage: 5V\u003cbr\u003e- Battery: built-in 600mAH lithium battery\u003cbr\u003e- Charging time: 4 hours\u003cbr\u003e- Indicators: red light for charging; turn to green light when fully charged\u003cbr\u003e- Net weight: 56g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With Donut Antenna \u0026amp; Amplifier):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek Malachite Receiver\u003cbr\u003e- 1 x Antenna\u003cbr\u003e- 1 x Type-C Data Cable\u003cbr\u003e- 1 x EVA Storage Bag\u003cbr\u003e- 1 x Lanyard\u003cbr\u003e- 1 x 3M Transparent Pad\u003cbr\u003e- 1 x Donut WB Antenna\u003cbr\u003e- 1 x Transimpedance Amplifier\u003cbr\u003e- 1 x User Manual\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (Without Donut Antenna \u0026amp; Amplifier):\u003c\/strong\u003e\u003cbr\u003e- 1 x Host\u003cbr\u003e- 1 x Antenna\u003cbr\u003e- 1 x Type-C Data Cable\u003cbr\u003e- 1 x EVA Storage Bag\u003cbr\u003e- 1 x Lanyard\u003cbr\u003e- 1 x 3M Transparent Pad\u003cbr\u003e- 1 x User Manual\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-01.jpg?v=1738661757\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-02.jpg?v=1738661758\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-03.jpg?v=1738661758\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-04.jpg?v=1738661758\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-05.jpg?v=1738661791\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-06.jpg?v=1738661791\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-07.jpg?v=1738661792\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-08.jpg?v=1738661792\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-09.jpg?v=1738661824\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-010.jpg?v=1738661824\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-011.jpg?v=1738661825\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-012.jpg?v=1738661825\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-013.jpg?v=1738661856\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-014.jpg?v=1738661856\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-015.jpg?v=1738661855\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-016.jpg?v=1738661856\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-017.jpg?v=1738661888\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-018.jpg?v=1738661888\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Standard","offer_id":45025113407653,"sku":"85051","price":359.0,"currency_code":"USD","in_stock":false},{"title":"With Donut Antenna \u0026 Amplifier","offer_id":45025113374885,"sku":"93461","price":369.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/93461-10.jpg?v=1739264145"},{"product_id":"hamgeek-web-888-sdr-receiver-software-defined-radio-with-16bit-adc-62m-bandwidth-gps-module-for-hf-vhf","title":"HamGeek WEB-888 SDR Receiver Software Defined Radio with 16bit ADC 62M Bandwidth GPS Module for HF VHF","description":"\u003cp\u003e\u003cstrong\u003eWhat is Web-888 SDR?\u003c\/strong\u003e\u003cbr\u003eThe Web-888 SDR features a Web based user interface and a new RF front-end and FPGA implementation. It is a cutting-edge SDR product utilizing 16-bit ADC sampling and covering a frequency band up to 62MHz.\u003c\/p\u003e\n\u003cp\u003ePowered by the Zynq7010 FPGA with dual A9 cores for ARM, an FPGA implementation and highly optimized server software, the Web-888 leverages a fast in-chip bus to deliver 13 channels with waterfall enabled for all channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eProven RF and ADC Design\u003cbr\u003eWeb-888 SDR inherits the robust RF and ADC design from RX-888, featuring a 16-bit ADC with a tunable sampling rate for superior signal fidelity.\u003c\/p\u003e\n\u003cp\u003eWide Frequency Coverage\u003cbr\u003eCovering a spectrum from 1kHz to 62MHz and VHF range from 118MHz to 145MHz, the Web-888 SDR ensures comprehensive signal reception for diverse applications.\u003c\/p\u003e\n\u003cp\u003eSupports Multiple Channels\u003cbr\u003eSimultaneously operating 13 RX channels and 13 waterfall channels, it enables extensive monitoring and analysis without the need for multiple devices.\u003c\/p\u003e\n\u003cp\u003eAffordable and Reliable\u003cbr\u003eOffering top-tier features at a lower price than competitors, Web-888 SDR provides exceptional value without compromising on performance and reliability.\u003c\/p\u003e\n\u003cp\u003eOpen Source Compatibility\u003cbr\u003eBenefit from a compatible user experience with KiwiSDR and Red Pitaya Notes, it is supported by an active open-source community for continuous innovation and support.\u003c\/p\u003e\n\u003cp\u003eElegant and Efficient Design\u003cbr\u003eA single-board design combining FPGA and CPU ensures lower power consumption, streamlined functionality, and a sleek, efficient form factor.\u003c\/p\u003e\n\u003cp\u003eClock Flexibility\u003cbr\u003eFeaturing a tunable frequency driver, the ADC allows for precise reference clock input and output, enhancing synchronization capabilities for advanced applications.\u003c\/p\u003e\n\u003cp\u003eWeb-Based User Experience\u003cbr\u003eAccessible from any web browser, the Web-888 SDR offers a simple, intuitive user interface with no setup barriers. It is ideal for both beginners and advanced users.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Specifications:\u003c\/strong\u003e\u003cbr\u003eOverall Performance\u003cbr\u003e* Dimensions: 100mm x 71mm x 25.2mm\/3.9\" x 2.8\" x 1\" excluding SMA\u003cbr\u003e* Active Cooling Fan: 40mm\/1.6\"\u003cbr\u003e* 16-bit ADC DDC architecture SDR\u003cbr\u003e* 61.44 MHz real-time bandwidth\u003cbr\u003e* Built-in all-constellation GPS module\u003cbr\u003e* Gigabit Ethernet\u003cbr\u003e* 24.576MHz, 0.5 ppm TCXO\u003cbr\u003e* Up to 6 extended GPIOs are used by default for antenna switch control\u003cbr\u003e* HF: 1KHz-61.44MHz and VHF: 118MHz-145MHz\u003c\/p\u003e\n\u003cp\u003eOutstanding Performance\u003cbr\u003e* 16-bit 130 MSPS ADC LTC2208\u003cbr\u003e* Up to 100 dB SFDR\u003cbr\u003e* 1x Power input, 5V\/2A\u003c\/p\u003e\n\u003cp\u003e1000M High-Speed Ethernet\u003cbr\u003e* High-speed, low latency and more stable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware Specifications:\u003c\/strong\u003e\u003cbr\u003e* For Alpine Linux 3.20 with Linux 6.6 Kernel\u003cbr\u003e* WebRX-based browser SDR experience\u003cbr\u003e* Supports for KiwiSDR websocket protocol for applications\u003cbr\u003e* WSPR, FT8 skimmers, and other decoders\u003cbr\u003e* 13 RX channels and 13 spectrum channels simultaneously online\u003cbr\u003e* Binary updates with alpha and stable channels\u003cbr\u003e* Read-only root partition to prevent SD card corruption\u003cbr\u003e* FPGA DMA controller for efficient data transfer without CPU involvement\u003cbr\u003e* In addition, Web-888 offers Red Pitaya Notes compatibility which hosts several SDR related projects that are single ADC applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e* 1 x HamGeek SDR Radio\u003cbr\u003e* 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e* Weight: 0.2kg\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44799656034469,"sku":"91369","price":300.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91369-4.jpg?v=1739263912"},{"product_id":"加图片-hamgeek-malachite-dsp-sdr-radio-receiver-v5-cnc-aluminum-shell-with-1-10d-firmware-shortwave-radio-black","title":"HamGeek Black Malachite DSP SDR Radio Receiver V5 Shortwave Radio with CNC Aluminum Shell \u0026 1.10d Firmware","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- Malachite DSP SDR receiver V52023 has been newly released, fixing all bugs in V4, including integrated option board, antenna switching, CNC aluminum shell, front speaker and 1.10d fully functional firmware.\u003cbr\u003e- Instruction video: \u003ca rel=\"noopener\" href=\"https:\/\/space.bilibili.com\/50389953\" target=\"_blank\"\u003ehttps:\/\/space.bilibili.com\/50389953\u003c\/a\u003e\u003cbr\u003e- User manual download:\u003cbr\u003e  \u003ca rel=\"noopener\" href=\"https:\/\/pan.baidu.com\/s\/1rh-rNiQe3cAyFzq-kfus-A?pwd=107m\" target=\"_blank\"\u003ehttps:\/\/pan.baidu.com\/s\/1rh-rNiQe3cAyFzq-kfus-A?pwd=107m\u003c\/a\u003e\u003cbr\u003e  Password: 107m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Frequency range: 10kHz ~ 250MHz, 400MHz ~ 2GHz\u003cbr\u003e- Spectrum width: 160kHz, 80kHz, 40kHz\u003cbr\u003e- Modulation type: AM, SSB, DSB, CW, NFM, WFM (Stereo RDS support)\u003cbr\u003e- Sensitivity: 0.3uV up to 1GHz\u003cbr\u003e- Dynamic range: 82dB\u003cbr\u003e- Antenna interface: single antenna interface design, standard SMA female gold-plated connector, automatic switching between 50ohm and high impedance input mode, built-in RF preamplifier and 0 - 30dB programmable RF attenuator\u003cbr\u003e- Battery capacity: built-in 3.7V 5000mAh large capacity lithium battery, 12-hour service life for normal volume\u003cbr\u003e- Software DSP function: variable filter width, adaptive squelch (NR), threshold squelch, noise canceler (NB), automatic gain control (AGC), automatic notch filter (ANF), RDS support Stereo FM, analog stereo, equalizer\u003cbr\u003e- Hardware features: STM32H743 ARM CPU at 480MHz, MSi001 multi-band and multi-mode tuner, 3.5-inch 480x320 LCD display, capacitive touch screen, two mechanical encoders\u003cbr\u003e- USB connection to personal computer capable of transmitting CAT, IQ and audio\u003cbr\u003e- CNC aluminum shell design, anodized\u003cbr\u003e- Size: 162 x 74 x 29 mm (L x W x H) (without protrusions)\u003cbr\u003e- Weight: 350g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x Main Unit\u003cbr\u003e- 1 x Antenna\u003cbr\u003e- 1 x EVA Protection Bag\u003cbr\u003e- 1 x Type-C Data Cable\u003cbr\u003e- 1 x Storage Bag\u003cbr\u003e- 1 x User Manual\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceiving AM, SW and FM radio with whip antenna:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-01.jpg?v=1738733701\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-02.jpg?v=1738733701\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-03.jpg?v=1738733701\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompared with the size of a certain brand of radio:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-04.jpg?v=1738733730\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-05.jpg?v=1738733731\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-06.jpg?v=1738733730\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-07.jpg?v=1738733730\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-08.jpg?v=1738733730\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-09.jpg?v=1738733773\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-10.jpg?v=1738733772\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-11.jpg?v=1738733773\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-12.jpg?v=1738733773\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-13.jpg?v=1738733843\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-14.jpg?v=1738733844\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-15.jpg?v=1738733843\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-16.jpg?v=1738733844\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44799806013605,"sku":"82737","price":240.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/82737-8.jpg?v=1739264058"},{"product_id":"hamgeek-sdr-dreamkit-v2d-100khz-2800mhz-all-band-radio-portable-radio-receiver-with-5-3mhz-bandwidth-4-screen-for-pc","title":"HAMGEEK SDR Dreamkit V2D 100KHz-2800MHz All Band Radio Portable Radio Receiver with 5.3MHz Bandwidth 4\" Screen for PC","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe portable radio receiver HAMGEEK SDR Dreamkit V2D (receiver, device) is designed to receive, display and listen to radio signals with various types of analog modulation. The display can be configured to show up to 4 spectrum\/waterfall plots for different bands. The receiver is built using SDR technology, which allows you to programmatically control the device settings. The signal processing and demodulation block is completely made on a DSP-based microcontroller. The device can be used both in stand-alone mode and under PC control. The receiver allows you to listen to the demodulated signal through the built-in speaker or wired headphones.\u003c\/p\u003e\n\u003cp\u003eThe receiver is designed for listening to amateur radio communications on the MW \/ HF \/ VHF \/ UHF bands, tuning analog modulation transmitters, radio monitoring, as well as searching for radio bugs. The aluminum case and the presence of a built-in battery allows it to be used both in laboratory and practical conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDifferences of HAMGEEK SDR Dreamkit V2D from analogues:\u003c\/strong\u003e\u003cbr\u003e- Frequency range 100 kHz-2800 MHz\u003cbr\u003e- Adjustable low noise amplifier and attenuator\u003cbr\u003e- Matched and high impedance input mode\u003cbr\u003e- Sample rate 12 MHz\u003cbr\u003e- 5MHz maximum span bandwidth and continuous transmission of this bandwidth to PC\u003cbr\u003e- ADC resolution 16 bit\u003cbr\u003e- Sensitivity 0.25 uV\u003cbr\u003e- Demodulation WFM, WFM STEREO\/RDS, NFM, AM, LSB, USB, DSB, CW\u003cbr\u003e- Powerful pre\/post signal processing - AGC, impulse\/spectral noise reduction, notch filters, equalizer\u003cbr\u003e- Simultaneous display of up to 4 bands in Spectrum\/Waterfall mode\u003cbr\u003e- Port for charging and connecting to a PC - USB type-C\u003cbr\u003e- Support for working with the HDSDR program\u003cbr\u003e- Multifunctional encoder\u003cbr\u003e- Mouse control\u003cbr\u003e- Memory for 40 presets\u003cbr\u003e- Built-in speaker\u003cbr\u003e- 4\" IPS touch screen\u003cbr\u003e- Flexible chart display settings\u003cbr\u003e- Built-in 5000mAh battery\u003cbr\u003e- Wide operating frequency range, no dropouts\u003cbr\u003e- Built-in adjustable attenuator and low noise amplifier\u003cbr\u003e- Real (non-quadrature) spectrum transfer without dips in the middle of the band\u003cbr\u003e- Over 60 dB out-of-band rejection\u003cbr\u003e- Simultaneous spectrum display and signal demodulation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor whom?\u003c\/strong\u003e\u003cbr\u003eThe portable radio receiver HAMGEEK SDR Dreamkit V2D is designed to listen to the radio while simultaneously displaying the spectrum, this allows you to assess the radio environment and tune in to the wave of interest. The device is made in a durable aluminum case with a built-in battery, so it can be used both in the laboratory and in the field. The device will be useful for those who are engaged in amateur communications, radio control, as well as repair of radio transmitting equipment. You can connect wired headphones to the device, in addition, a 2 W speaker is built into the device. The device is equipped with a 4-inch resistive touch display. Autonomous operating time - 4 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAMGEEK SDR Dreamkit V2D is used for:\u003c\/strong\u003e\u003cbr\u003e- Searching and listening to radio sessions on amateur bands\u003cbr\u003e- Listening to VHF (FM) radio stations\u003cbr\u003e- Radio monitoring\u003cbr\u003e- Radio transmitter tuning\u003cbr\u003e- PC as SDR set-top box with 12 MHz sample rate and 5 MHz bandwidth\u003cbr\u003e- Educational process in universities\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain technical data of V2D:\u003c\/strong\u003e\u003cbr\u003e- Firmware version: V2.12\u003cbr\u003e- Frequency range: 100 kHz-2800 MHz\u003cbr\u003e- Bandwidth spectrum baseband: 1 - 2 - 3 - 5.3MHz\u003cbr\u003e- Bandwidth IF spectrum: 25 - 50 - 100 - 250 - 450KHz\u003cbr\u003e- Frequency resolution: 1Hz\u003cbr\u003e- ADC bit depth: 16bit\u003cbr\u003e- Sensitivity: 0.25uV\u003cbr\u003e- Control range of low noise amplifier: 0-30dB\u003cbr\u003e- Control range of attenuator: 0-30dB\u003cbr\u003e- Input impedance 50 Ohm switchable to HI-Z\u003cbr\u003e- Reference oscillator TCXO: ±0.5 ppm\u003cbr\u003e- Operating modes: CW, AM, AMS, LSB, USB, DSB, NFM, WFM\/STEREO\/RDS\u003cbr\u003e- Fixed filter bandwidths for WFM: 100, 200, 300, 400 kHz\u003cbr\u003e- Adjustable filter bandwidths for WFM: 50 kHz-450 kHz\u003cbr\u003e- Fixed filter bandwidths for AM, AMS, NFM: 4, 6, 8, 10, 20 kHz\u003cbr\u003e- Adjustable filter bandwidths for AM, AMS, NFM: 2 - 25 kHz\u003cbr\u003e- Fixed filter bandwidths for LSB, USB, DSB: 1.8 - 2.0 - 2.4 - 2.7 - 3.3 kHz\u003cbr\u003e- Adjustable filter bandwidths for LSB, USB, DSB: 1 - 5kHz\u003cbr\u003e- Fixed filter bandwidths for CW: 0.25 - 0.3 - 0.5 - 1.0 - 1.5 kHz\u003cbr\u003e- Adjustable filter bandwidths for CW: 0.1 - 2 kHz\u003cbr\u003e- Display graphics scalable: Baseband - IF1 - IF2 (MPX) - Waterfall - Audio - RDS - S-Meter\u003cbr\u003e- Additional functions: AGC, noise reduction, squelch, notch filter, 5 band equalizer with presets.\u003cbr\u003e- Fixed step sizes: Off, 100Hz, 1KHz, 5KHz, 6.25KHz, 9KHz, 10KHz, 12.5KHz, 25KHz (User freely adjustable)\u003cbr\u003e- Alphanumeric frequency memory: 125\u003cbr\u003e- Tuning wheel with push function\u003cbr\u003e- Antenna connector: SMA\u003cbr\u003e- Built-in 2W speaker \u0026amp; headphone output in stereo\u003cbr\u003e- Screen size: 4\"\u003cbr\u003e- Touch display\u003cbr\u003e- Screen resolution: 800x480 pixels\u003cbr\u003e- Computer mouse connection via USB-C\u003cbr\u003e- Battery capacity: 5000mAh\u003cbr\u003e- Battery life: approx. 4h\u003cbr\u003e- PC connection interface: USB 2.0 type C for updates \u0026amp; control via various SDR programs\u003cbr\u003e- Aluminum housing powder coated\u003cbr\u003e- Dimensions (LxHxD): 150 x 81 x 27 mm\u003cbr\u003e- Weight 0.4 kg\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HAMGEEK Dreamkit V2D\u003cbr\u003e- 1 x Touch input pen\u003cbr\u003e- 1 x USB C charging\/PC cable\u003cbr\u003e- 1 x SMA extension cable\u003cbr\u003e- 1 x English instruction manual\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 0.8kg\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-01.jpg?v=1739156783\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-04.jpg?v=1739156783\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-05.jpg?v=1739156814\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-06.jpg?v=1739156814\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-08.jpg?v=1739156815\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-09.jpg?v=1739156841\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-10.jpg?v=1739156842\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-11.jpg?v=1739156842\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-12.jpg?v=1739156842\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-13.jpg?v=1739156865\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-14.jpg?v=1739156865\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-15.jpg?v=1739156865\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-16.jpg?v=1739156865\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-17.jpg?v=1739156890\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-18.jpg?v=1739156890\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-19.jpg?v=1739156890\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-20.jpg?v=1739608355\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-21.jpg?v=1739608355\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-22.jpg?v=1739608356\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-23.jpg?v=1739608355\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-24.jpg?v=1739608395\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44829781098661,"sku":"94016","price":379.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94016-2_22d1eaee-a02d-444e-b0e6-e15a9d580b5e.jpg?v=1739846622"},{"product_id":"2pcs-hamgeek-f410-sdr-70mhz-6ghz-software-defined-radio-zynq7z035-ad9361-1g-ddr3-supports-sfp-pcie","title":"2PCS HAMGEEK F410 SDR 70MHZ-6GHZ Software Defined Radio ZYNQ7Z035 AD9361 1G DDR3 Supports SFP\/PCIE","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e- The boards are custom products with a minimum order of 2 pieces and a production time of 15 days.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- Two HAMGEEK F410 SDR boards\u003cbr\u003e- Compact size\u003cbr\u003e- Easy to integrate\u003cbr\u003e- Flexible to use\u003cbr\u003e- Core board design: TDD FDD compatible design\u003cbr\u003e- Support OEM customization. Please contact customer service for details\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Brand: HAMGEEK\u003cbr\u003e- FPGA: XC7Z035-FFG900\u003cbr\u003e- RF chip: AD9361\u003cbr\u003e- Memory: 1GB PS 1GB PL\u003cbr\u003e- Interface: 1G-ETH\/SD-CARD\/UART\/GTX\/MIPI\u003cbr\u003e- SMA: 2TX 2RX\u003cbr\u003e- Hardware frequency range: 70MHZ-6GHZ\u003cbr\u003e- Signal bandwidth: 200KHZ-56MHZ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 2 x Boards\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 1.5kg\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94132-01.jpg?v=1740362055\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44916481228965,"sku":"94132","price":2999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94132-1.jpg?v=1740362100"},{"product_id":"2pcs-hamgeek-f440-70mhz-6ghz-sdr-development-boards-w-zynq7z100-8tx-8rx-channels-1gb-ddr3-4-ad9361","title":"2PCS HAMGEEK F440 70MHZ-6GHZ SDR Development Boards w\/ ZYNQ7Z100 8TX 8RX Channels 1GB DDR3 \u0026 4 AD9361","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e- The boards are custom products with a minimum order of 2 pieces and a production time of 15 days.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 2pcs HAMGEEK F440 SDR development boards\u003cbr\u003e- Using Using material for Rogers\u003cbr\u003e- 8 TX, 8 RX and multi-channel synchronization\u003cbr\u003e- Support OEM customization. Please contact customer service for details\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Brand: HAMGEEK\u003cbr\u003e- FPGA: ZYNQ-XC7Z100-FFG900\u003cbr\u003e- RF chip: AD9361*4\u003cbr\u003e- Memory: 1GB 32 Bit DDR3\u003cbr\u003e- Interface: 1G-ETH\/SD-CARD\/UART\/SFP\u003cbr\u003e- SMA: 8 TX and 8 RX\u003cbr\u003e- Hardware frequency range: 70MHZ-6GHZ\u003cbr\u003e- Signal bandwidth: 200KHZ-56MHZ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Detailed Parameters:\u003c\/strong\u003e\u003cbr\u003e1. Basic Index Requirements:\u003cbr\u003e(1) Number of RF transceiver channels: 8 TX and 8 RX;\u003cbr\u003e(2) Number of AD9361: 4 pieces;\u003cbr\u003e(3) Optical module requirements: 10Gbps optical modules*4;\u003cbr\u003e(4) FPGA requirements: Use XC7Z100 FPGA;\u003cbr\u003e(5) Ethernet requirements: One Gigabit Ethernet on the PS side;\u003cbr\u003e(6) Other external interfaces: One RS485, one UART, one FPGA JTAG download port;\u003cbr\u003e(7) RF receive link gain: Use the original gain of AD9361;\u003cbr\u003e(8) RF transmit link gain: Use the original transmit power of AD9361;\u003cbr\u003e(9) RF receive link characteristics: Consistent with the receive channel characteristics marked in the AD9361 official website manual;\u003cbr\u003e(10) RF transmit link characteristics: Consistent with the transmit channel characteristics marked in the AD9361 official website manual;\u003cbr\u003e(11) Isolation between RF channels: ＞50dB. The RF channels are isolated by adding partition walls;\u003cbr\u003e(12) The boards adopt the mixed pressure method of surface layer Rogers4350B + middle layer FR4;\u003cbr\u003e(13) The RF signal input and output interfaces are extended to the edge of the board with microstrip lines, which is convenient for the SMA on the external structure to pass through the wall and overlap on the PCB;\u003cbr\u003e(14) Power input: DC12V±2V\/3A;\u003cbr\u003e(15) Software driver requirements: drive AD9361 and drive optical port.\u003c\/p\u003e\n\u003cp\u003e2. External Interface Sockets and Dimensions:\u003cbr\u003e(16) RF input and output: SMA-K. Use SMA-KFD with flange type socket to pass through the cavity and overlap solder on the PCB;\u003cbr\u003e(17) Optical port socket: SFP;\u003cbr\u003e(18) Ethernet socket: RJ45;\u003cbr\u003e(19) Power socket: feed-through capacitor;\u003cbr\u003e(20) FPGA debugging download port socket: 6-core 2.54 bent pin socket (extending from the edge of the board);\u003cbr\u003e(21) RS485, UART socket: J30J-15;\u003cbr\u003e(22) External dimensions: A metal external structure is required. Overall dimensions: 200×120×45mm, with sockets available on three sides.\u003c\/p\u003e\n\u003cp\u003e3. Environmental Characteristics:\u003cbr\u003e(23) Temperature: Operating temperature: -40℃ to 70℃; storage temperature: -10℃ to 50℃;\u003cbr\u003e(24) Relative humidity: Operating relative humidity: ≤80%RH (non-condensing); storage humidity: ≤85%RH (non-condensing);\u003cbr\u003e(25) Waterproof characteristics: None;\u003cbr\u003e(26) Vibration characteristics: Execute GJB 8481-2015 standard;\u003cbr\u003e(27) Electromagnetic compatibility requirements: Under working conditions, the electromagnetic emission and conduction of the equipment must comply with the requirements of Group 1 equipment in GB 4824-2013 Industrial, Scientific and Medical (ISM) Radio Frequency Equipment Characteristics Limits and Measurement Methods. In addition, under working conditions, the electromagnetic emission and conduction of the equipment will not affect the normal operation of the product under test, nor will it be affected by the product under test and other surrounding equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 2 x HAMGEEK F440 Development Boards\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 1.5kg\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44916513833125,"sku":"94133","price":7499.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94133-1.jpg?v=1740362837"},{"product_id":"2pcs-hamgeek-adrv9009-sdr-70mhz-6ghz-boards-with-zynq-xczu15eg-pl-2gb-ps-4gb-and-8tx-8rx-channels","title":"2PCS HAMGEEK ADRV9009 SDR 70MHz-6GHz Boards with ZYNQ-XCZU15EG \u0026 PL 2GB PS 4GB and 8TX 8RX Channels","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e• The boards are custom products with a minimum order of 2 pieces and a production time of 15 days.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe HAMGEEK ADRV9009 is a highly integrated agile radio frequency (RF) transceiver that features dual-channel transmit and receive capabilities, integrated frequency synthesizers, and digital signal processing.\u003c\/p\u003e\n\u003cp\u003eThis IC has a diverse combination of high performance and low power consumption to meet the requirements of 3G, 4G and 5G macrocellular time division duplex (TDD) base station applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e• FPGA: ZYNQ-XCZU15EG-FFVB1156\u003cbr\u003e• RF chip: ADRV9009x4\u003cbr\u003e• Memory: PL 2GB and PS 4GB\u003cbr\u003e• Interface: 1G-ETH\/SD-CARD\/UART\/SFP\u003cbr\u003e• SMA: 8TX and 8RX\u003cbr\u003e• Hardware frequency range: 70MHz-6GHz\u003cbr\u003e• Signal bandwidth: 200M for receiving and 450M for transmitting\u003c\/p\u003e\n\u003cp\u003e1. Core Chip Requirements for the PCB:\u003cbr\u003e• FPGA: ZU15EG, DDR4 (PS), DDR4 (PL), QSPI boot (128MB);\u003cbr\u003e• Transceiver Chips: 4*ADRV9009;\u003cbr\u003e• DAC Chip: 1*9747.\u003c\/p\u003e\n\u003cp\u003e2. Functional and Performance Requirements:\u003cbr\u003e• Supports 200 MHz bandwidth receiving mode;\u003cbr\u003e• Supports 450 MHz bandwidth transmitting mode;\u003cbr\u003e• Hardware supports GPIO control for ADRV9009-FHM functionality;\u003cbr\u003e• Optional OCXO (10 MHz) or TCXO (30.72 MHz), selectable via soldering;\u003cbr\u003e• Onboard optical fiber interface;\u003cbr\u003e• Onboard EMMC (4G).\u003c\/p\u003e\n\u003cp\u003e3. Interface Requirements:\u003cbr\u003e• Power supply requirements: A wide voltage design of 9-12V is needed (with reverse polarity protection);\u003cbr\u003e• External general-purpose I\/O interfaces should have isolation protection;\u003cbr\u003e• External interfaces should be placed as close to the edge of the PCB as possible for easy installation and use.\u003c\/p\u003e\n\u003cp\u003e4. Software Requirements (Providing MPSOC Program):\u003cbr\u003e• Enable FPGA loading (QSPI);\u003cbr\u003e• Enable ADRV9009 transceiver functionality;\u003cbr\u003e• Enable AD9747 transmission functionality;\u003cbr\u003e• Enable Ethernet functionality;\u003cbr\u003e• Enable DDR4 reading\/writing (PS\/PL);\u003cbr\u003e• Enable SD card file transfer to PL side DDR4, and 9009 continuous waveform playback.\u003c\/p\u003e\n\u003cp\u003e5. PCB Specifications:\u003cbr\u003e• Power input range: -50 dBm to -10 dBm;\u003cbr\u003e• Channel isolation: \u0026gt;45 dBc;\u003cbr\u003e• 200 MHz in-band fluctuation: \u0026lt;±2 dB;\u003cbr\u003e• Receiver spurious-free dynamic range (SFDR): \u0026gt;50 dBc;\u003cbr\u003e• ADC effective bit count: \u0026gt;8.5 Bits;\u003cbr\u003e• Maximum transmission power: At least -15 dBm for frequencies above 5G; at least 0 dBm for frequencies below 3G.\u003c\/p\u003e\n\u003cp\u003e6. Interface Definition:\u003cbr\u003e• External interfaces: J30J-31J (including RS232 debugging serial port, RS485, 1000M Ethernet, RS422, power supply, etc. The specific details will be based on the results of both parties' agreement);\u003cbr\u003e• Debug interface: Designed with 2.54mm pitch pin header;\u003cbr\u003e• RF interface: SMP (using hole-punch design);\u003cbr\u003e• FPGA-IO expansion: Designed with 24*2 dual-row pin header, with a preferred small pitch of 2.54mm as per Party A's requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e• 2 x HAMGEEK ADRV9009 SDR Boards\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e• Weight: 2kg\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44916551909541,"sku":"94134","price":14499.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94134-1.jpg?v=1740363534"},{"product_id":"2pcs-hamgeek-zcu-102-sdr-development-boards-w-ad9361-ultrascale-mpsoc-xczu15eg-4gb-ddr4-2gb-ddr4","title":"2PCS HAMGEEK ZCU-102 SDR Development Boards w\/ AD9361 Ultrascale+ MPSoC XCZU15EG 4GB DDR4 \u0026 2GB DDR4","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e- The boards are custom products with a minimum order of 2 pieces and a production time of 15 days.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 2pcs HAMGEEK ZCU-102 SDR boards\u003cbr\u003e- Embedded software radio processing platform\u003cbr\u003e- Powerful programmable logic resources\u003cbr\u003e- Rich external interface capabilities\u003cbr\u003e- Can run Ubuntu desktop system\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Reset Management Chip: MAX16025 for ADI (refer to ZCU102)\u003cbr\u003e- Processing Chip: SOC chip xczu15eg-ffvb1156-2-i for AMD\u003cbr\u003e- PS DDR4: DDR4, 4GB, 72\/64bit, 2400Mbps\u003cbr\u003e- PL DDR4: DDR4, 2GB, 32bit, 2400Mbps\u003cbr\u003e- PS QSPI: 64MB\u003cbr\u003e- PS eMMC Capacity: Not less than 32GB\u003cbr\u003e- Power Supply Capability: Core not less than 50A (PS: 10A + PL: 40A. Power supply can refer to ZCU102)\u003cbr\u003e- NVMe Interface: M.2\u003cbr\u003e- Network Interface Chip: DP83867IR (refer to ZCU102)\u003cbr\u003e- FMC Interface: 2 HPC (LA+10GT, refer to ZCU102, and 8GT expanded to 10GT)\u003cbr\u003e- GTH Allocation:\u003cbr\u003e  * GTH228 (all) + GTH229 (all) + 2GT from GTH230 allocated to HPC0; the remaining 2GT from GTH230 allocated to 2 SFP28 ports.\u003cbr\u003e  * GTH129 (all) + GTH130 (all) + 2GT from GTH128 allocated to HPC1; the remaining 2GT from GTH128 allocated to 2 SATA ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed Introduction to ZCU-102 Parameters:\u003c\/strong\u003e\u003cbr\u003e1.1 Processing Module Functional Requirements:\u003cbr\u003e- Possess computer host functionality and be capable of running the Ubuntu desktop system;\u003cbr\u003e- Have power-on reset and system reset management functions. Able to connect to an external short-circuit button to achieve reset functionality;\u003cbr\u003e- Feature monitoring of key point temperatures, voltages, and other statuses;\u003cbr\u003e- Boast powerful processing capabilities, specifically the ability to perform large-scale signal processing through programmable logic;\u003cbr\u003e- Offer a rich set of external interfaces, including network ports;\u003cbr\u003e- Support the ability to update the processing module program online.\u003c\/p\u003e\n\u003cp\u003e1.2 Channel Module Functional Requirements:\u003cbr\u003e- Support 4 channels of RF reception and 4 channels of RF transmission;\u003cbr\u003e- Include frequency reference input and frequency reference output capabilities;\u003cbr\u003e- Feature monitoring of key point temperatures and voltages.\u003c\/p\u003e\n\u003cp\u003e1.3 External Interfaces of the Processing Module:\u003cbr\u003e- 10 Gigabit Optical Port: SFP28, 2 ports;\u003cbr\u003e- Gigabit Ethernet Port: RJ45, 1 port;\u003cbr\u003e- JTAG\/UART Debugging Port: Type C, 1 port;\u003cbr\u003e- USB 3.0 Interface: 3.0, Type C, 1 port (GTR1);\u003cbr\u003e- Display Interface: miniDP, 1 port (external GTR2 \u0026amp; 3);\u003cbr\u003e- RS422 Interface: J30J, 1 port;\u003cbr\u003e- USB 2.0 Interface: Type A, HUB, 4 ports (2 external, 2 internal);\u003cbr\u003e- Display Interface: VGA, 1 port (internal);\u003cbr\u003e- Hard Drive Interface: M.2, 1 port (internal GTR0);\u003cbr\u003e- Hard Drive Interface: SATA, 2 ports (GTH);\u003cbr\u003e- SD Card Interface: TF card slot, 1 port (internal);\u003cbr\u003e- Power Interface: 2 ports, 9~36VDC, external Type C, internal DIP;\u003cbr\u003e- Internal Expansion Port: 1 port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 2 x HAMGEEK ZCU-102 SDR\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 1.5kg\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- SD card is not included.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94135-01.jpg?v=1740364376\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44916584939685,"sku":"94135","price":5400.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94135-1.jpg?v=1740473006"},{"product_id":"2pcs-hamgeek-fmcomms5-70mhz-6ghz-ad9361-sdr-boards-software-defined-radio-4tx-4rx-w-lvds-interface","title":"2PCS HAMGEEK FMCOMMS5 70MHz-6GHz AD9361 SDR Boards Software Defined Radio 4TX 4RX w\/ LVDS Interface","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e- The boards are custom products with a minimum order of 2 pieces and a production time of 15 days.\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- The new HAMGEEK FMCOMMS5 is available in 2 pieces and supports OEM customization. Please contact customer service for details\u003cbr\u003e- Supports external clock input and output\u003cbr\u003e- Standard FMC design\u003cbr\u003e- Low phase noise\u003cbr\u003e- The RF daughter board can be used for radar and signal detection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- RF chip: AD9361*2\u003cbr\u003e- Interface: LVDS\u003cbr\u003e- SMA: 4TX \u0026amp; 4 RX\u003cbr\u003e- Hardware frequency range: 70MHZ-6GHZ\u003cbr\u003e- Signal bandwidth: 200KHZ-56MHZ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 2 x HAMGEEK FMCOMMS5 Boards\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e- Weight: 1.5kg\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":44916632682661,"sku":"94131","price":1849.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/94131-1.jpg?v=1740365907"},{"product_id":"hamgeek-latest-1mhz-6ghz-hackrf-one-r10-v2-0-x-software-defined-radio-sdr-platform-with-without-shell","title":"HamGeek Latest 1MHZ-6GHZ HackRF One R10 V2.0.x Software Defined Radio SDR Platform with\/without Metal Shell","description":"\u003cp\u003e\u003cstrong\u003eAttention:\u003c\/strong\u003e\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.2 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2M and a FAT32 formatted MicroSD card over 1G.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One R10 Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (With Metal Shell \u0026amp; 4 Antennas):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek HackRF One + shield cover + aluminum alloy shell\u003cbr\u003e- 4 x SMA antennas (40MHz-6GHz antenna, 2.4G\/5G\/5.8G antenna, 70MHz-2700MHz antenna, and 40MHz-860MHz antenna)\u003cbr\u003e- 1 x HackRF TCXO PPM0.1 GPS clock module\u003cbr\u003e- 1 x Micro USB cable for LG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (With Metal Shell \u0026amp; 4 Antennas):\u003c\/strong\u003e\u003cbr\u003e- Weight: 0.55kg\u003cbr\u003e--------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (Without Shell \u0026amp; Antenna):\u003c\/strong\u003e\u003cbr\u003e- 1 x HAMGEEK HackRF One Board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (Without Shell \u0026amp; Antenna):\u003c\/strong\u003e\u003cbr\u003e- Weight: 0.25kg\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"R10 With Shell and Antennas","offer_id":44997516460197,"sku":"94624","price":131.0,"currency_code":"USD","in_stock":false},{"title":"Only R10 Board","offer_id":44997516492965,"sku":"94625","price":112.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/66148-1.jpg?v=1742007160"},{"product_id":"hamgeek-hackrf-one-r10-v2-0-x-portapack-h2m-plastic-shell-assembled-5-antennas-usb-cable-with-without-lna","title":"HamGeek HackRF One R10 V2.0.x + PortaPack H2M + Plastic Shell Assembled + 5 Antennas + USB Cable (with\/without LNA)","description":"\u003cp\u003e\u003cstrong\u003eOptional LNA:\u003c\/strong\u003e\u003cbr\u003eIt is a low noise RF amplifier suitable for 50M-6GHz, featuring 20dB gain. With a MicroUSB power supply port, you can plug in a USB data cable to connect it with a computer or other equipment to get it powered. After the power is supplied, the LED light on the product will light up, indicating that it is working now.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLNA Specifications:\u003c\/strong\u003e\u003cbr\u003e- 50M-6GHz RF signal power amplifier, gain 20dB\u003cbr\u003e- With large dynamic range and wide operating frequency range, it is suitable for various types of RF signal amplification with fixed gain\u003cbr\u003e- Wide frequency range, stable gain, low noise figure, and large dynamic range (+20dBm at 1dBP)\u003cbr\u003e- Applicable to all kinds of RF transmission circuits, extending the communication distance\u003cbr\u003e- Shield with anti-reverse protection diode\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAttention:\u003c\/strong\u003e\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.2 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2M and a FAT32 formatted MicroSD card over 1G.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One R10 Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack includes several decoders and transmitters, but the third-party \"Havoc\" firmware is what you'll really want to use, as it offers many more decoders and transmission options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgress of Work:\u003c\/strong\u003e\u003cbr\u003e1. The program validation prototype has been completed.\u003cbr\u003e2. The latest documents, from May 2017, are based on improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatching and Replay:\u003c\/strong\u003e\u003cbr\u003e- One of the best things about the PortaPack is that it makes capturing and replaying wireless signals, such as those from ISM band remote controls, extremely easy.\u003cbr\u003e- To catch a signal, simply enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' record button, and then press the key on the remote.\u003cbr\u003e- After that, stop the recording to save it to the SD card.\u003cbr\u003e- Now, you can go into the Replay menu, select the file you just recorded, and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone TX:\u003c\/strong\u003e\u003cbr\u003e- By using the 3.5mm audio jack, the Portapack can also function as a standard push-to-talk or voice-activated walkie-talkie radio. With a microphone connected to the audio jack, simply hold down the right button to activate push-to-talk.\u003cbr\u003e- If needed, you can also enable multiple CTCSS tone options, as well as tones that appear to enable transmission to wireless headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Transmitters:\u003c\/strong\u003e\u003cbr\u003e- There are generic OOK transmitters that can be programmed with custom data. This mode might be useful for experimenting with simple key fobs or devices like home automation switches.\u003cbr\u003e- Numerous transmit modes are implemented that are questionable in most countries and could result in serious legal consequences. These transmitters are intended solely for internal testing within a Faraday cage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceivers:\u003c\/strong\u003e\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack, you can easily listen to standard NFM and WFM audio signals. ADS-B reception can be enabled on the PortaPack by selecting the inductor and lightning symbol in the top-right corner. With the bias tee enabled, it can receive aircraft signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch 240x320 TFT screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plating\u003cbr\u003e- ROHS compliance (for export to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version was updated in May 2017, with the most recent documentation.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, a headphone jack, a real-time clock, and a micro SD card slot.\u003c\/p\u003e\n\u003cp\u003eSimply add a USB battery, and you're ready to explore the radio spectrum wherever you are. The PortaPack firmware runs on the fast processors (for ARM) in your HackRF. No computer is necessary (except for firmware updates).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (place 8-bit mono files in the SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, etc.)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText, and Time group transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell 202, etc.)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Langage de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" for emergency situations\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with a resistive touch panel.\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button.\u003cbr\u003e- Coin battery for preserving settings and date\/time.\u003cbr\u003e- Micro SD card slot for data and code storage.\u003c\/p\u003e\n\u003cp\u003eSome features demonstrated in the February 22, 2016 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software when you put the PortaPack into \"HackRF Mode.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack is compatible only with the HackRF One and is not compatible with the earlier HackRF Jawbreaker design. If your HackRF has an RF shield installed, the PortaPack should fit without issues. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results, with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should not encounter any mechanical problems.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack requires an external battery. While any USB-connected battery should work, their quality varies significantly, and poorly designed batteries may introduce voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One are not designed to replace a handheld ham radio receiver. Although receiving sensitivity varies across bands, they will not perform as well as a dedicated ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePortaPack H2M:\u003c\/strong\u003e\u003cbr\u003eFeatures:\u003cbr\u003e- PortaPack H2M is an official co-branded licensed version and is sold by HAMGEEK.\u003cbr\u003e- PortaPack H2M adds a 10.00MHZ TCXO FOX 5070 crystal oscillator to the original 2nd generation H2\u003cbr\u003e- Support GPS simulation\u003cbr\u003e- Support the latest official firmware upgrade\u003c\/p\u003e\n\u003cp\u003eDescription:\u003cbr\u003e- The screen has been upgraded to a 3.2-inch wide-angle display, fully supporting touch control.\u003cbr\u003e- It features a maximum 3W speaker amplifier and supports switching between speakers and headphones. It can be equipped with external speakers to enable loudspeaker functionality. The pure hardware logic implementation ensures compatibility with future firmware upgrades. The original version does not support external speakers.\u003cbr\u003e- The battery socket has been upgraded and now supports a more suitable battery standard (the built-in lithium battery is 2000mAh). It fits perfectly into the HackRF. It also supports USB charging, a charging status LED display, and button-controlled power on\/off functionality, which is essential for offline use. The original version could only be powered by plugging in and lacked the ability to turn on or off independently.\u003cbr\u003e- The upgraded crystal oscillator is a 10.00 MHz TCXO FOX 5070, a high-precision active crystal oscillator with enhanced anti-interference capabilities. Additionally, it supports GPS simulation without the need to connect to computer software.\u003cbr\u003e- Based on feedback regarding the first generation's key feel issues, the buttons have been upgraded for a better tactile experience and now come with keycaps, making them easier to match with custom-designed shells. Additionally, the first-generation illuminated knobs have been upgraded to a black finish, complementing the matte black PCB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (Without LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (PortaPack H2M + HackRF One)\u003cbr\u003e-1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 1 x Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (Without LNA):\u003c\/strong\u003e\u003cbr\u003e- Weight: 1kg\u003c\/p\u003e\n\u003cp\u003e-------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (With LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (PortaPack H2M + HackRF One)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 1 x RF Power Amp Board\u003cbr\u003e- 1 x SMA Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (With LNA):\u003c\/strong\u003e\u003cbr\u003e- Weight: 1kg\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- It has been assembled and is ready to use.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"With 5pcs Antenna","offer_id":44997612667045,"sku":"94626","price":172.0,"currency_code":"USD","in_stock":false},{"title":"With 5pcs Antenna and LNA","offer_id":44997612699813,"sku":"94627","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/87345-2.jpg?v=1742006850"},{"product_id":"hamgeek-1mhz-6ghz-hackrf-one-r10-v2-0-x-portapack-h2m-w-built-in-speaker-5-antennas-usb-cable-with-without-lna","title":"HamGeek 1MHz-6GHz HackRF One R10 V2.0.x + Portapack H2M w\/ Built-in Speaker + 5 Antennas + USB Cable (with\/without LNA","description":"\u003cp\u003e\u003cstrong\u003eAttention:\u003c\/strong\u003e\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.2 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2M and a FAT32 formatted MicroSD card over 1G.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One R10 Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack includes several decoders and transmitters, but the third-party \"Havoc\" firmware is what you'll really want to use, as it offers many more decoders and transmission options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgress of Work:\u003c\/strong\u003e\u003cbr\u003e1. The program validation prototype has been completed.\u003cbr\u003e2. The latest documents, from May 2017, are based on improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatching and Replay:\u003c\/strong\u003e\u003cbr\u003e- One of the best things about the PortaPack is that it makes capturing and replaying wireless signals, such as those from ISM band remote controls, extremely easy.\u003cbr\u003e- To catch a signal, simply enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' record button, and then press the key on the remote.\u003cbr\u003e- After that, stop the recording to save it to the SD card.\u003cbr\u003e- Now, you can go into the Replay menu, select the file you just recorded, and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone TX:\u003c\/strong\u003e\u003cbr\u003e- By using the 3.5mm audio jack, the Portapack can also function as a standard push-to-talk or voice-activated walkie-talkie radio. With a microphone connected to the audio jack, simply hold down the right button to activate push-to-talk.\u003cbr\u003e- If needed, you can also enable multiple CTCSS tone options, as well as tones that appear to enable transmission to wireless headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Transmitters:\u003c\/strong\u003e\u003cbr\u003e- There are generic OOK transmitters that can be programmed with custom data. This mode might be useful for experimenting with simple key fobs or devices like home automation switches.\u003cbr\u003e- Numerous transmit modes are implemented that are questionable in most countries and could result in serious legal consequences. These transmitters are intended solely for internal testing within a Faraday cage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceivers:\u003c\/strong\u003e\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack, you can easily listen to standard NFM and WFM audio signals. ADS-B reception can be enabled on the PortaPack by selecting the inductor and lightning symbol in the top-right corner. With the bias tee enabled, it can receive aircraft signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch 240x320 TFT screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plating\u003cbr\u003e- ROHS compliance (for export to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version was updated in May 2017, with the most recent documentation.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, a headphone jack, a real-time clock, and a micro SD card slot.\u003c\/p\u003e\n\u003cp\u003eSimply add a USB battery, and you're ready to explore the radio spectrum wherever you are. The PortaPack firmware runs on the fast processors (for ARM) in your HackRF. No computer is necessary (except for firmware updates).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (place 8-bit mono files in the SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, etc.)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText, and Time group transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell 202, etc.)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Langage de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" for emergency situations\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with a resistive touch panel.\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button.\u003cbr\u003e- Coin battery for preserving settings and date\/time.\u003cbr\u003e- Micro SD card slot for data and code storage.\u003c\/p\u003e\n\u003cp\u003eSome features demonstrated in the February 22, 2016 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software when you put the PortaPack into \"HackRF Mode.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack is compatible only with the HackRF One and is not compatible with the earlier HackRF Jawbreaker design. If your HackRF has an RF shield installed, the PortaPack should fit without issues. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results, with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should not encounter any mechanical problems.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack requires an external battery. While any USB-connected battery should work, their quality varies significantly, and poorly designed batteries may introduce voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One are not designed to replace a handheld ham radio receiver. Although receiving sensitivity varies across bands, they will not perform as well as a dedicated ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePortaPack H2M:\u003c\/strong\u003e\u003cbr\u003eFeatures:\u003cbr\u003e- PortaPack H2M is an official co-branded licensed version and is sold by HAMGEEK.\u003cbr\u003e- PortaPack H2M adds a 10.00MHZ TCXO FOX 5070 crystal oscillator to the original 2nd generation H2\u003cbr\u003e- Support GPS simulation\u003cbr\u003e- Support the latest official firmware upgrade\u003c\/p\u003e\n\u003cp\u003eDescription:\u003cbr\u003e- The screen has been upgraded to a 3.2-inch wide-angle display, fully supporting touch control.\u003cbr\u003e- It features a maximum 3W speaker amplifier and supports switching between speakers and headphones. It can be equipped with external speakers to enable loudspeaker functionality. The pure hardware logic implementation ensures compatibility with future firmware upgrades. The original version does not support external speakers.\u003cbr\u003e- The battery socket has been upgraded and now supports a more suitable battery standard (the built-in lithium battery is 2000mAh). It fits perfectly into the HackRF. It also supports USB charging, a charging status LED display, and button-controlled power on\/off functionality, which is essential for offline use. The original version could only be powered by plugging in and lacked the ability to turn on or off independently.\u003cbr\u003e- The upgraded crystal oscillator is a 10.00 MHz TCXO FOX 5070, a high-precision active crystal oscillator with enhanced anti-interference capabilities. Additionally, it supports GPS simulation without the need to connect to computer software.\u003cbr\u003e- Based on feedback regarding the first generation's key feel issues, the buttons have been upgraded for a better tactile experience and now come with keycaps, making them easier to match with custom-designed shells. Additionally, the first-generation illuminated knobs have been upgraded to a black finish, complementing the matte black PCB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (with LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (HackRF One + Portapack H2M)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x 20DB 50MHz-6GHz LNA\u003cbr\u003e- 1 x SMA Cable\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (with LNA):\u003c\/strong\u003e\u003cbr\u003e- Weight: 1kg\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (without LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (HackRF One + PortaPack H2M)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (without LNA):\u003c\/strong\u003e\u003cbr\u003e- Volume weight: 1.5kg\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- The product is assembled.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Battery is included.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"With 5pcs Antenna LNA","offer_id":44997685084325,"sku":"94628","price":183.0,"currency_code":"USD","in_stock":false},{"title":"With 5pcs Antenna","offer_id":44997685117093,"sku":"94629","price":175.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92219-2.jpg?v=1742006561"},{"product_id":"hamgeek-1mhz-6ghz-hackrf-one-r10-v2-0-x-portapack-h2m-w-metal-shell-5-antennas-usb-cable-without-with-lna","title":"HamGeek 1MHz-6GHz HackRF One R10 V2.0.x + PortaPack H2M with Metal Shell + 5 Antennas + USB Cable (without\/with LNA)","description":"\u003cp\u003e\u003cstrong\u003eAttention:\u003c\/strong\u003e\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.2 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2M and a FAT32 formatted MicroSD card over 1G.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One R10 Description:\u003c\/strong\u003e\u003cbr\u003e- HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e- Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One Specifications:\u003c\/strong\u003e\u003cbr\u003e- 1 MHz to 6 GHz operating frequency\u003cbr\u003e- Half-duplex transceiver\u003cbr\u003e- Up to 20 million samples per second\u003cbr\u003e- 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e- For GNU Radio, SDR#, and the like\u003cbr\u003e- Software-configurable RX and TX gain and baseband filter\u003cbr\u003e- Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e- SMA female antenna connector\u003cbr\u003e- SMA female clock input and output for synchronization\u003cbr\u003e- Convenient buttons for programming\u003cbr\u003e- Internal pin headers for expansion\u003cbr\u003e- Hi-Speed USB 2.0\u003cbr\u003e- USB-powered\u003cbr\u003e- Open source hardware\u003cbr\u003e- HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThe official firmware created for the PortaPack includes several decoders and transmitters, but the third-party \"Havoc\" firmware is what you'll really want to use, as it offers many more decoders and transmission options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgress of Work:\u003c\/strong\u003e\u003cbr\u003e1. The program validation prototype has been completed.\u003cbr\u003e2. The latest documents, from May 2017, are based on improvements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatching and Replay:\u003c\/strong\u003e\u003cbr\u003e- One of the best things about the PortaPack is that it makes capturing and replaying wireless signals, such as those from ISM band remote controls, extremely easy.\u003cbr\u003e- To catch a signal, simply enter the \"Catching\" menu, set the frequency of the remote key, press the red 'R' record button, and then press the key on the remote.\u003cbr\u003e- After that, stop the recording to save it to the SD card.\u003cbr\u003e- Now, you can go into the Replay menu, select the file you just recorded, and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicrophone TX:\u003c\/strong\u003e\u003cbr\u003e- By using the 3.5mm audio jack, the Portapack can also function as a standard push-to-talk or voice-activated walkie-talkie radio. With a microphone connected to the audio jack, simply hold down the right button to activate push-to-talk.\u003cbr\u003e- If needed, you can also enable multiple CTCSS tone options, as well as tones that appear to enable transmission to wireless headphones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Transmitters:\u003c\/strong\u003e\u003cbr\u003e- There are generic OOK transmitters that can be programmed with custom data. This mode might be useful for experimenting with simple key fobs or devices like home automation switches.\u003cbr\u003e- Numerous transmit modes are implemented that are questionable in most countries and could result in serious legal consequences. These transmitters are intended solely for internal testing within a Faraday cage!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReceivers:\u003c\/strong\u003e\u003cbr\u003eBy connecting speakers to the Portapack's 3.5mm audio jack, you can easily listen to standard NFM and WFM audio signals. ADS-B reception can be enabled on the PortaPack by selecting the inductor and lightning symbol in the top-right corner. With the bias tee enabled, it can receive aircraft signals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch 240x320 TFT screen\u003cbr\u003e- Navigation switch\u003cbr\u003e- Audio output\u003cbr\u003e- Microphone input\u003cbr\u003e- DC 2.1 interface\u003cbr\u003e- 4-layer gold plating\u003cbr\u003e- ROHS compliance (for export to Europe and America)\u003c\/p\u003e\n\u003cp\u003eThe latest version was updated in May 2017, with the most recent documentation.\u003c\/p\u003e\n\u003cp\u003eAdd a PortaPack to your HackRF One software-defined radio and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, a headphone jack, a real-time clock, and a micro SD card slot.\u003c\/p\u003e\n\u003cp\u003eSimply add a USB battery, and you're ready to explore the radio spectrum wherever you are. The PortaPack firmware runs on the fast processors (for ARM) in your HackRF. No computer is necessary (except for firmware updates).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHAVOC Features Include:\u003c\/strong\u003e\u003cbr\u003e- IQ file replay\u003cbr\u003e- Microphone FM transmit with CTCSS\u003cbr\u003e- CTCSS decoder\u003cbr\u003e- Frequency manager (save \u0026amp; load from SD card, with categories and notes)\u003cbr\u003e- File manager\u003cbr\u003e- \"Soundboard\" wave file player (place 8-bit mono files in the SD card \/wav directory)\u003cbr\u003e- ADS-B receiver with map view\u003cbr\u003e- SSTV transmitter\u003cbr\u003e- Fully configurable transmit signals\u003cbr\u003e- POCSAG transmitter\u003cbr\u003e- POCSAG receiver\/decoder\u003cbr\u003e- Morse transmitter (FM tone and CW)\u003cbr\u003e- OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, etc.)\u003cbr\u003e- RDS (Radio Data System) PSN, RadioText, and Time group transmitter\u003cbr\u003e- Meteorological radiosonde receiver for M10 and M2K2\u003cbr\u003e- AFSK receiver\u003cbr\u003e- AFSK transmitter (Bell 202, etc.)\u003cbr\u003e- Nuoptix DTMF sync transmitter\u003cbr\u003e- TouchTunes jukebox universal remote\u003cbr\u003e- LCR (Langage de Commande Routier) message generator\u003cbr\u003e- Street lighting control transmitter (CCIR tones)\u003cbr\u003e- \"Play Dead\" for emergency situations\u003cbr\u003e- Fully configurable RF signal generator\u003cbr\u003e- RSSI audio output as pitch (for direction finding)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 3.2-inch, 240 x 320 RGB LCD with a resistive touch panel.\u003cbr\u003e- Four-way arrow keys, rotary jog wheel, and select button.\u003cbr\u003e- Coin battery for preserving settings and date\/time.\u003cbr\u003e- Micro SD card slot for data and code storage.\u003c\/p\u003e\n\u003cp\u003eSome features demonstrated in the February 22, 2016 firmware video:\u003cbr\u003e- SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.\u003cbr\u003e- Wideband (18MHz) spectrum analysis and waterfall.\u003cbr\u003e- Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).\u003cbr\u003e- HackRF mode runs HackRF firmware for use with host computer SDR software.\u003cbr\u003e- PM calibration for more accurate tuning.\u003cbr\u003e- Sleep mode saves power by turning off just the display.\u003cbr\u003e- You may also find the Furrtek HAVOC firmware very interesting!\u003c\/p\u003e\n\u003cp\u003eYour HackRF will continue to function with computer-based SDR software when you put the PortaPack into \"HackRF Mode.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack is compatible only with the HackRF One and is not compatible with the earlier HackRF Jawbreaker design. If your HackRF has an RF shield installed, the PortaPack should fit without issues. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results, with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should not encounter any mechanical problems.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack requires an external battery. While any USB-connected battery should work, their quality varies significantly, and poorly designed batteries may introduce voltage regulator noise into the radio.\u003c\/p\u003e\n\u003cp\u003eThe PortaPack and HackRF One are not designed to replace a handheld ham radio receiver. Although receiving sensitivity varies across bands, they will not perform as well as a dedicated ham radio receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePortaPack H2M:\u003c\/strong\u003e\u003cbr\u003eFeatures:\u003cbr\u003e- PortaPack H2M is an official co-branded licensed version and is sold by HAMGEEK.\u003cbr\u003e- PortaPack H2M adds a 10.00MHZ TCXO FOX 5070 crystal oscillator to the original 2nd generation H2\u003cbr\u003e- Support GPS simulation\u003cbr\u003e- Support the latest official firmware upgrade\u003c\/p\u003e\n\u003cp\u003eDescription:\u003cbr\u003e- The screen has been upgraded to a 3.2-inch wide-angle display, fully supporting touch control.\u003cbr\u003e- It features a maximum 3W speaker amplifier and supports switching between speakers and headphones. It can be equipped with external speakers to enable loudspeaker functionality. The pure hardware logic implementation ensures compatibility with future firmware upgrades. The original version does not support external speakers.\u003cbr\u003e- The battery socket has been upgraded and now supports a more suitable battery standard (the built-in lithium battery is 2000mAh). It fits perfectly into the HackRF. It also supports USB charging, a charging status LED display, and button-controlled power on\/off functionality, which is essential for offline use. The original version could only be powered by plugging in and lacked the ability to turn on or off independently.\u003cbr\u003e- The upgraded crystal oscillator is a 10.00 MHz TCXO FOX 5070, a high-precision active crystal oscillator with enhanced anti-interference capabilities. Additionally, it supports GPS simulation without the need to connect to computer software.\u003cbr\u003e- Based on feedback regarding the first generation's key feel issues, the buttons have been upgraded for a better tactile experience and now come with keycaps, making them easier to match with custom-designed shells. Additionally, the first-generation illuminated knobs have been upgraded to a black finish, complementing the matte black PCB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included (Without LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (HackRF One + PortaPack H2M)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 1 x Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (Without LNA):\u003c\/strong\u003e\u003cbr\u003e- Weight: 1kg\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePackage Included (With LNA):\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Radio (HackRF One + Portapack H2M)\u003cbr\u003e- 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e- 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e- 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e- 1 x 40MHz-860GHz Antenna\u003cbr\u003e- 1 x 700MHz-2700MHz Antenna\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e- 1 x 20DB 50MHz-6GHz LNA\u003cbr\u003e- 1 x SMA Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (With LNA):\u003c\/strong\u003e\u003cbr\u003e- Weight: 1KG\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- The product is assembled.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- Battery is included.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"With 5pcs Antenna","offer_id":44997810618533,"sku":"94630","price":173.0,"currency_code":"USD","in_stock":false},{"title":"With 5pcs Antenna and LNA","offer_id":44997810651301,"sku":"94631","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/68168-3.jpg?v=1742006192"},{"product_id":"hamgeek-1mhz-to-6ghz-hackrf-one-r10c-v2-0-x-with-portapack-h4m-sdr-radio-software-defined-radio-with-antennas","title":"HAMGEEK 1MHz to 6GHz HackRF One R10C V2.0.x with PortaPack H4M SDR Radio Software Defined Radio with Antennas","description":"\u003cp\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003cbr\u003e* It is a signature edition\u003cbr\u003e* It uses the MAX2837 chip\u003cbr\u003e* With a type-c port and a battery level display\u003cbr\u003e* A 360-degree knob also functions as a button\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAttention:\u003c\/strong\u003e\u003cbr\u003e1. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.2 by default.\u003cbr\u003e2. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H4M and a FAT32 formatted MicroSD card over 1G.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHackRF One R10C Description:\u003c\/strong\u003e\u003cbr\u003e* HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz.\u003cbr\u003e* Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.\u003cbr\u003e* It is designed with a type-c port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications of HackRF One:\u003c\/strong\u003e\u003cbr\u003e* 1 MHz to 6 GHz operating frequency\u003cbr\u003e* Half-duplex transceiver\u003cbr\u003e* Up to 20 million samples per second\u003cbr\u003e* 8-bit quadrature samples (8-bit I and 8-bit Q)\u003cbr\u003e* For GNU Radio, SDR#, and the like\u003cbr\u003e* Software-configurable RX and TX gain and baseband filter\u003cbr\u003e* Software-controlled antenna port power (50 mA at 3.3 V)\u003cbr\u003e* SMA female antenna connector\u003cbr\u003e* SMA female clock input and output for synchronization\u003cbr\u003e* Convenient buttons for programming\u003cbr\u003e* Internal pin headers for expansion\u003cbr\u003e* Hi-Speed USB 2.0\u003cbr\u003e* USB-powered\u003cbr\u003e* Open source hardware\u003cbr\u003e* HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImprovements of H4M:\u003c\/strong\u003e\u003cbr\u003e* Single power on\/off switch: When powered off, the battery will no longer phantom drain, meaning the device can be completely powered off.\u003cbr\u003e* Advanced battery management IC and battery display: The screen can display the battery level, including percentage, voltage, and current\/draw. It is easier to check the battery level.\u003cbr\u003e* Matte screen: This matte screen helps you see the content of the screen more clearly in sunny outdoor environments.\u003cbr\u003e* 360-degree knob and button: The knob button has been redesigned to a flat form, returning to the iPod-style click wheel. It is more convenient to use the knob.\u003cbr\u003e* GPIO port: The new generation H4M adds a GPIO port, allowing users to create their own add-ons for the H4M, similar to the Flipper Zero. This is a major step forward and a feature not available in previous versions of Portapack.\u003cbr\u003e* Improved charging speeds: The H4M improves both the charging quality and speed.\u003cbr\u003e* Microphone on\/off switch: It allows you to turn the microphone on or off.\u003cbr\u003e* Automatic sound switching between headphones and speakers: When you plug in the headphones, the H4M will automatically switch from speaker mode to headset mode. This is a feature not available in previous versions of Portapack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking List (With 1 Antenna):\u003c\/strong\u003e\u003cbr\u003e* 1 x HAMGEEK R10C + H4M (Assembled)\u003cbr\u003e* 1 x Type-C Cable\u003cbr\u003e* 1 x 40MHz-6GHz Telescopic Antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (With 1 Antenna):\u003c\/strong\u003e\u003cbr\u003e* Weight: 0.8kg\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePacking List (With 5 Antennas):\u003c\/strong\u003e\u003cbr\u003e* 1 x HAMGEEK R10C + H4M (Assembled)\u003cbr\u003e* 1 x Type-C Cable\u003cbr\u003e* 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e* 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e* 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e* 1 x 40MHz-860GHz Antenna\u003cbr\u003e* 1 x 700MHz-2700MHz Antenna\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (With 5 Antennas):\u003c\/strong\u003e\u003cbr\u003e* Weight: 1kg\u003cbr\u003e---------------------------------------------------------------------------------------------------------------------------------\u003cbr\u003e\u003cstrong\u003ePacking List (With 5 Antennas + LNA):\u003c\/strong\u003e\u003cbr\u003e* 1 x HAMGEEK R10C + H4M (Assembled)\u003cbr\u003e* 1 x Type-C Cable\u003cbr\u003e* 1 x 40MHz-6GHz Telescopic Antenna\u003cbr\u003e* 1 x 2.4\/5\/5.8GHz Antenna\u003cbr\u003e* 1 x 35DBi GSM\/3G\/4G Antenna\u003cbr\u003e* 1 x 40MHz-860GHz Antenna\u003cbr\u003e* 1 x 700MHz-2700MHz Antenna\u003cbr\u003e* 1 x 20DB 50MHz-6GHz LNA\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging Details (With 5 Antennas + LNA):\u003c\/strong\u003e\u003cbr\u003e* Weight: 1kg\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Only R10C Board","offer_id":45657271173285,"sku":"96794","price":112.0,"currency_code":"USD","in_stock":false},{"title":"Only H4MS with Shell","offer_id":45657271206053,"sku":"96795","price":55.0,"currency_code":"USD","in_stock":false},{"title":"R10C and H4MS With 1 Antenna","offer_id":45091352936613,"sku":"94868","price":165.0,"currency_code":"USD","in_stock":false},{"title":"R10C and H4MS With 5 Antennas","offer_id":45091352969381,"sku":"94869","price":176.0,"currency_code":"USD","in_stock":false},{"title":"R10C and H4MS With 5 Antennas + LNA","offer_id":45091353002149,"sku":"94870","price":185.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96794-5.jpg?v=1750663433"},{"product_id":"hamgeek-p210-70mhz-6ghz-sdr-development-board-aluminum-alloy-shell-zynq7020-ad9361-with-open-source-code-for-pluto-sdr","title":"HAMGEEK P210 70MHz-6GHz SDR Development Board + Aluminum Alloy Shell ZYNQ7020 AD9361 with Open Source Code for Pluto SDR","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- HAMGEEK P210 is a cost-effective SDR development board\u003cbr\u003e- Open-source code\u003cbr\u003e- Can be run offline\u003cbr\u003e- Supports development via host computers\u003cbr\u003e- Stronger logic capabilities: Integrated dual-core Cortex-A9 processor (766MHz) and 85K logic unit\u003cbr\u003e- 4 ports: ETH, SD card slot, USB-OTG and USB-UART ports make it easy to use during the development process\u003cbr\u003e- Powerful features and better performance: It is for ZED-FMCOMMS2-3\/Open WIFI\/Pluto SDR. It also supports development via an host computer (for official host computer\/Matlab\/GUN Radio, etc.)\u003cbr\u003e- RF IC: AD9361\u003cbr\u003e- Number of channels: 2T2R MIMO\u003cbr\u003e- Baseband processor: For ZYNQ XC7Z020\u003cbr\u003e- DDR3: 512M\u003cbr\u003e- Host interface: 1G ETH\u003cbr\u003e- Transmission data bandwidth with HOST: P210-12MSPS\u003cbr\u003e- Transmission data bandwidth with HOST (burst sampling): 61.44MSPS\u003cbr\u003e- API: For ADl iiO\u003cbr\u003e- Suitable for hobbyists and makers to develop and DIY\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvantages of HAMGEEK P210:\u003c\/strong\u003e\u003cbr\u003e1. RF:\u003cbr\u003e- RF IC: AD9361\u003cbr\u003e- Frequency Range: 70MHz to 6GHz (AD9361)\u003cbr\u003e- RF Channel: 2RT, 2x2 MIMO\u003cbr\u003e- Signal Bandwidth: 200K to 56MHz (AD9361)\u003c\/p\u003e\n\u003cp\u003e2. Data Processing Unit:\u003cbr\u003e- ZYNQ SoC: XC7Z020CLG400i, dual-core cortex-A9 at 766MHz, 85k logic unit\u003cbr\u003e- DDR3 RAM: 1GByte\u003cbr\u003e- QSPI flash: 32MB\u003c\/p\u003e\n\u003cp\u003e3. Interfaces:\u003cbr\u003e- Gigabit Ethernet\u003cbr\u003e- USB2.0 OTG\u003cbr\u003e- SD card slot\u003cbr\u003e- Integrated USB-JTAG, USB-UART\u003cbr\u003e- Expansion ports supported\u003c\/p\u003e\n\u003cp\u003e4. Clock \u0026amp; Power Supply:\u003cbr\u003e- TCXO: 0.5ppm\u003cbr\u003e- Power supply: Powered via USB port\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Configuration:\u003c\/strong\u003e\u003cbr\u003e- FPGA: ZYNQ-XC7Z020-CLG400\u003cbr\u003e- RF chip: AD9361\u003cbr\u003e- Memory: 512MB 16Bit DDR3\u003cbr\u003e- Interfaces: 1G-ETH\/SD-CARD slot\/USB-OTG\/USB-UART\u003cbr\u003e- SMA ports: 2 for TX and 2 for RX\u003cbr\u003e- Hardware frequency range: 70MHz-6GHz\u003cbr\u003e- Signal bandwidth: 200KHz-56MHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HAMGEEK P210 SDR Development Board with Shell\u003cbr\u003e- 2 x USB Cables\u003cbr\u003e- 1 x Antenna\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45132859736229,"sku":"95157","price":319.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95157-1.jpg?v=1743645272"},{"product_id":"hamgeek-mini-ats20-handheld-si4732-radio-receiver-dsp-sdr-receiver-fm-am-mw-sw-ssb-lsb-usb","title":"HamGeek Mini ATS20+ Handheld SI4732 Radio Receiver DSP SDR Receiver FM AM (MW \u0026 SW) SSB (LSB \u0026 USB)","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eHamGeek Mini ATS20+ is a modified version based on the ATS20+. We have changed the ATS20+ from a desktop model to a handheld model for easier portability.\u003c\/p\u003e\n\u003cp\u003eIts size is just right to fit into a pocket, and it features a 0.96-inch OLED display. HamGeek Mini ATS20+ allows you to access the FM band, AGC switch, and MONO mode as needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpgrades Include:\u003c\/strong\u003e\u003cbr\u003e1. Button backlight LED\u003cbr\u003e2. Battery level display\u003cbr\u003e3. Integrated MEGA328P\u003cbr\u003e4. Latest firmware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=9KHYxBQIdpM\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/www.youtube.com\/watch?v=9KHYxBQIdpM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e* FM, AM (MW and SW), and SSB (LSB and USB)\u003cbr\u003e* Audio bandwidth filters of 0.5, 1, 1.2, 2.2, 3, and 4 kHz\u003cbr\u003e* 22 pre-configured commercial radio and ham bands\u003cbr\u003e* BFO control\u003cbr\u003e* Frequency step switch (1, 5, and 10 kHz)\u003cbr\u003e* FM: 64-108MHz\u003cbr\u003e* LW: 153-279kHz\u003cbr\u003e* MW: 522-1701kHz\u003cbr\u003e* SW: 2.3-30MHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical Specifications:\u003c\/strong\u003e\u003cbr\u003e* Display: SI4732-RDS-ALL-IN-ONE-OLED\u003cbr\u003e* Power supply: 3.6V 1000mAh lithium battery\u003cbr\u003e* USB charging\u003cbr\u003e* Supports audio output and 3.5mm headphones\u003cbr\u003e* Supports 8-ohm 1W speakers\u003cbr\u003e* FM output supports headphone antenna\u003cbr\u003e* Uses SMA antenna connector\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking List:\u003c\/strong\u003e\u003cbr\u003e* 1 x HamGeek Mini ATS20+ main unit\u003cbr\u003e* 1 x Telescopic antenna\u003cbr\u003e* 1 x Cleaning cloth\u003cbr\u003e    \u003cbr\u003e\u003cstrong\u003ePackaging Details:\u003c\/strong\u003e\u003cbr\u003e* Weight: 0.2kg\u003c\/p\u003e\n\u003cp\u003eband[] = {\u003cbr\u003e    {Fm_band_type, 8400, 10800, 10430, 10},\u003cbr\u003e    {Lw_band_type, 100, 510, 300, 1},\u003cbr\u003e    {Mw_band_type, 520, 1720, 810, 10},\u003cbr\u003e    {Sw_band_type, 1720, 3500, 1900, 1},  \/\/ 160 meters\u003cbr\u003e    {Sw_band_type, 3500, 4500, 3700, 1},  \/\/ 80 meters\u003cbr\u003e    {Sw_band_type, 4500, 5500, 4850, 5},\u003cbr\u003e    {Sw_band_type, 5500, 6300, 6000, 5},\u003cbr\u003e    {Sw_band_type, 6300, 7800, 7050, 5},  \/\/ 40 meters\u003cbr\u003e    {Sw_band_type, 7800, 10000, 9600, 5},\u003cbr\u003e    {Sw_band_type, 10000, 11000, 10100, 1},  \/\/ 30 meters\u003cbr\u003e    {Sw_band_type, 11000, 12500, 11940, 5},\u003cbr\u003e    {Sw_band_type, 12500, 13900, 13600, 5},\u003cbr\u003e    {Sw_band_type, 13900, 14500, 14270, 1},  \/\/ 20 meters\u003cbr\u003e    {Sw_band_type, 14500, 15900, 15300, 5},\u003cbr\u003e    {Sw_band_type, 15900, 17900, 17600, 5},\u003cbr\u003e    {Sw_band_type, 17900, 18300, 18100, 1},  \/\/ 17 meters\u003cbr\u003e    {Sw_band_type, 18300, 21900, 21200, 1},  \/\/ 15 meters\u003cbr\u003e    {Sw_band_type, 21900, 26200, 24940, 1},  \/\/ 12 meters\u003cbr\u003e    {Sw_band_type, 26200, 27900, 27500, 1},  \/\/ CB band (11 meters)\u003cbr\u003e    {Sw_band_type, 27900, 30000, 28400, 1}   \/\/ 10 meters\u003cbr\u003e};\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45350713262245,"sku":"95482","price":31.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95482-7.jpg?v=1745292858"},{"product_id":"hamgeek-g90s-20w-amateur-shortwave-radio-h-structure-portable-sdr-transceiver-with-heat-dissipation-function","title":"XIEGU G90S 20W Amateur Shortwave Radio H-structure Portable SDR Transceiver with Heat Dissipation Function","description":"\u003cp\u003e\u003cstrong\u003eImprovements:\u003c\/strong\u003e\u003cbr\u003e- The main body structure of the aircraft has been changed to H-shaped.\u003cbr\u003e- The material of the power cord is thickened.\u003cbr\u003e- Add a heat dissipation duct at the bottom and rear of the machine.\u003cbr\u003e- Optimized the speaker structure.\u003cbr\u003e- Add a speaker switching switch.\u003cbr\u003e- Optimizing the circuit has improved the signal-to-noise ratio.\u003cbr\u003e- Change the power plug for Anderson.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- The G90S is an amateur radio short-wave transceiver with a portable 20W in the SDR architecture.\u003cbr\u003e- Based on 24bit-C0DEC sampling, the G90S brings superior transceiver performance and a highly configurable feature experience; the separate head design allows you to flexibly position your host; with built-in high-performance ATU, you can meet your needs at any time. From then on, the antenna erection and adjustment are no longer problems.\u003cbr\u003e- G90S has a built-in variable bandwidth digital filter, which can continuously adjust the filter bandwidth to improve the immunity and selectivity of the walkie-talkie.\u003cbr\u003e- The G90S walkie-talkie can display the spectrum and waterfall chart of the received signal, and can quickly observe whether there is a communication signal on the adjacent frequency, which is convenient for users to quickly track and switch frequencies, and quickly follow the channel.\u003cbr\u003e- It has a wealth of expansion interfaces, KEY interface can be used to connect CW keys, COMM interface is used for firmware update and upgrade, I\/Q signal interface is convenient to connect XDT1 and computer SDR spectrum adapter, ACC interface can be used for data communication with CE19 adapter card Transmit audio signal or connect XPA125B amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- High-performance RF front end\u003cbr\u003e- SSB\/CW\/AM\/ three working modes\u003cbr\u003e- 1.8 inch high color TFT LCD\u003cbr\u003e- ±24k bandwidth spectrum display, waterfall display\u003cbr\u003e- Software-defined narrow-band filter (CW mode can be as narrow as 50Hz), built-in CW decoder\u003cbr\u003e- Separable head design\u003cbr\u003e- Built-in standing-wave scanner\u003cbr\u003e- Built-in efficient automatic antenna tuner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral parameters:\u003c\/strong\u003e\u003cbr\u003e- Frequency range:\u003cbr\u003e  Receiving: 0.5MHz ~ 30MHz\u003cbr\u003e  Transmitting: 1.8 ~ 2.0MHz; 18.068 ~ 18.168MHz; 3.5 ~ 3.9MHz; 21.0 ~ 21.45MHz; 7.0 ~ 7.2MHz; 24.89 ~ 24.99MHz; 10.1 ~ 10.15MHz; 28.0 ~ 29.7MHz; 14.0 ~ 14.35MHz\u003cbr\u003e- Operating mode: CW, AM, SSB\u003cbr\u003e- Minimum step: 10Hz\u003cbr\u003e- Antenna impedance: 50Ω\u003cbr\u003e- Scope of working temperature: 0°C ~ +50°C\u003cbr\u003e- Frequency stability: ±1.5ppm in the 10 ~ 60min after startup  at 25°C: 1ppm\/hour\u003cbr\u003e- Power supply voltage: 10.5 ~ 16.5VDC, negative electrode grounding\u003cbr\u003e- Current consumption:\u003cbr\u003e  Receiving: 700mA at Max\u003cbr\u003e  Transmitting: 6A at Max\u003cbr\u003e- Frame size: 120 x 45 x 210mm (W x H x L) (excluding protrusions)\u003cbr\u003e- Weight: about 1.63kg (only host)\u003c\/p\u003e\n\u003cp\u003eTransmitter parameters:\u003cbr\u003e- RF output power: 20W(SSB\/CW); 5W (AM carrier wave) at 13.8VDC\u003cbr\u003e- Spurious suppression: ≥50dB\u003cbr\u003e- Carrier suppression: ≥40dB\u003cbr\u003e- Microphone impedance: 200 ~ 10k (600Ω in general)\u003c\/p\u003e\n\u003cp\u003eReceiver parameters:\u003cbr\u003e- Circuit type: ZIF\u003cbr\u003e- Neighbor channel suppression: ≥60dB\u003cbr\u003e- Side-band suppression: ≥60dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x Main Unit\u003cbr\u003e- 1 x DB9 Extension Cable\u003cbr\u003e- 1 x USB Data Cable\u003cbr\u003e- 1 x Power Cable\u003cbr\u003e- 1 x Handheld Microphone\u003cbr\u003e- 1 x Screw Pack\u003cbr\u003e- 1 x Screw Driver\u003cbr\u003e- 1 x User Manual\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45352138473637,"sku":"92088","price":449.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/92088-1.jpg?v=1745314725"},{"product_id":"xiegu-x6200-sdr-hf-50mhz-full-mode-ssb-cw-am-fm-portable-shortwave-radio-with-4-inch-hd-color-screen","title":"XIEGU X6200 SDR HF\/50MHz Full Mode SSB\/CW\/AM\/FM Portable Shortwave Radio with 4-inch HD Color Screen","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- By adopting advanced RF direct sampling technology, RF signals are directly sampled and converted into digital signals, achieving high-definition voice transmission. Equipped with powerful baseband and RF units, it brings new powerful features and a more convenient user experience to amateur radio enthusiasts.\u003cbr\u003e- A 4-inch high-definition large screen provides intuitive visibility, equipped with waterfall display and spectrum function, which can intuitively display the signal activity on the selected frequency band.\u003cbr\u003e- The display interface supports switching between Chinese and English, and users can choose the corresponding language according to their needs.\u003cbr\u003e- HF\/50MHz full mode, supporting multiple communication modes including SSB, CW, AM, FM, and data communication modes. Provide a maximum transmission power of 8W to meet the communication needs of amateur radio enthusiasts. When using the built-in battery, the maximum transmission power is 5W.\u003cbr\u003e- Support receiving WFM radio and aviation frequency bands to experience more listening pleasure. Broadcast frequency band 88-108MHz, aviation frequency band 108-136MHz.\u003cbr\u003e- Compact design, compact appearance, total weight of about 930g, built-in detachable battery pack, battery capacity of 3200mAh, full battery life of about 4 hours (* only for receiving status)\u003cbr\u003e- The body integrates PTT buttons and a built-in microphone, making it convenient to use the radio outdoors.\u003cbr\u003e- Connect a Type-C data cable to the computer to perform FT8 operations. The radio has a built-in sound card and FT8 decoder.\u003cbr\u003e- Built in high-efficiency automatic antenna tuner and antenna standing wave scanner can help users quickly complete antenna setup and debugging work.\u003cbr\u003e- Integrated multi-mode modem, supports decoding CW, RTTY, and PSK signals, and displays them in text form on the screen.\u003cbr\u003e- Pre-set telegram and recording transmission, by storing text information and recording voice information in advance, press the corresponding tag to start automatic transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Model: X6200\u003cbr\u003e- Frequency range:\u003cbr\u003e  Receiving: 0.5 - 30MHz, 50 - 54MHz, 88 - 108MHz, 108 - 136MHz\u003cbr\u003e  Transmitting: 1.8 - 54MHz (only for amateur frequency)\u003cbr\u003e- Transmitting power: 0.1 - 8W (DC13.8V); 0.1 - 5W (built-in battery)\u003cbr\u003e- Working mode: SSB, CW, AM, FM\u003cbr\u003e- Current consumption: receiving 650mA at MAX, transmitting 3A at MAX\u003cbr\u003e- Working temperature: 0 - 50℃\u003cbr\u003e- Antenna interface: BNC female connector\u003cbr\u003e- Antenna impedance: 50ohms\u003cbr\u003e- Power interface: DC5525\u003cbr\u003e- Power voltage: 9 - 15V DC\u003cbr\u003e- Size: about 200 x 89 x 51mm\u003cbr\u003e- Host net weight: about 930g\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x Shortwave Radio\u003cbr\u003e- 1 x Multifunctional Handheld Microphone\u003cbr\u003e- 1 x Power Adapter\u003cbr\u003e- 1 x Power Cable\u003cbr\u003e- 1 x Type-C Data Cable\u003cbr\u003e- 1 x User Manual\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91637-01.jpg?v=1745368605\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91637-02.jpg?v=1745368605\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45354927390885,"sku":"91637","price":988.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/91637-1.jpg?v=1745368635"},{"product_id":"hamgeek-24mhz-1-7ghz-mini-sdr-high-performance-sdr-software-defined-radio-receiver-with-high-dynamic-range-for-airspy","title":"HamGeek 24MHz-1.7GHz Mini SDR High Performance SDR Software Defined Radio Receiver with High Dynamic Range for Airspy","description":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e* Continuous 24-1700MHz native RX range, down to DC with the SpyVerter option\u003cbr\u003e* 3.5dB NF between 42MHz and 1002MHz\u003cbr\u003e* Maximum RF input: +10dBm\u003cbr\u003e* Tracking RF filters\u003cbr\u003e* 35dBm IIP3 RF front end\u003cbr\u003e* 12bit ADC at 20MSPS (10.4 ENOB, 70dB SNR, 95dB SFDR)\u003cbr\u003e* 10.6 and 3 MSPS IQ output - optimized for portable tablet PC\u003cbr\u003e* 0.5ppm high precision, low phase noise clock\u003cbr\u003e* Up to 6 MHz panoramic spectrum view\u003cbr\u003e* 4.5V software switchable Bias-Tee, 100% compatible with SpyVerter and High Performance LNA\u003cbr\u003e* IQ or Real, 16bit fixed or 32bit float output streams\u003cbr\u003e* No IQ imbalance, DC offset or 1\/F noise at the center of the spectrum that plagues all the other SDRs\u003cbr\u003e* No drivers required. 100% Plug-and-play for Windows Vista\/7\/8\/8.1\/10, and all versions for Linux, for Mac and for Android\u003cbr\u003e* Compatible with Raspberry Pi, for Odroid, for Pine64 and for UP development boards\u003cbr\u003e* Operating temperature: -10°C to 40°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e* 1 x HamGeek Receiver\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45732305633445,"sku":"81885","price":148.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/81885-1.jpg?v=1752655884"},{"product_id":"hamgeek-high-performance-sdr-software-defined-radio-receiver-with-high-dynamic-range-for-airspy-hf-discovery","title":"HamGeek High Performance SDR Software Defined Radio Receiver with High Dynamic Range for Airspy HF + Discovery","description":"\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek Main Unit\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/81884-01.jpg?v=1752656314\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45732323852453,"sku":"81884","price":248.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/81884-1.jpg?v=1752656338"},{"product_id":"hamgeek-vhf-uhf-software-defined-radio-receiver-sma-connector-sdr-radio-accessory-for-airspy-r2","title":"HamGeek VHF\/UHF Software Defined Radio Receiver SMA Connector SDR Radio Accessory for Airspy R2","description":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Model: R2\u003cbr\u003e- Operating temperature: -10℃~40℃\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Receiver\u003cbr\u003e- 1 x USB Cable\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/79827-01.jpg?v=1752656731\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/79827-02.jpg?v=1752656731\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/79827-03.jpg?v=1752656731\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45732332437669,"sku":"79827","price":167.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/79827-7.jpg?v=1772596490"},{"product_id":"hamgeek-ku5p-development-board-fpga-development-board-xcku5p-fmc-hpc-qsfp28-100g-optical-port-pcie3-0","title":"HamGeek KU5P Development Board FPGA Development Board XCKU5P FMC HPC QSFP28 100G Optical Port PCIE3.0","description":"\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek Development Board\u003cbr\u003e- 1 x 12V 3A Power Adapter\u003cbr\u003e- 1 x Type-C Cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- The XCKU5P-2FFVB676I is a secondhand chip.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003e- Q: Does it need to buy JTAG separately?\u003cbr\u003e- A: No need, the onboard JTAG and FT2232 can convert one UART and one JTAG circuit. Simply connect the TYPEC line to the DEBUG interface.\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-01.jpg?v=1759106900\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-02.jpg?v=1759106900\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-03.jpg?v=1759106901\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-04.jpg?v=1759106901\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-05.jpg?v=1759106900\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-06.jpg?v=1759106900\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-07.jpg?v=1759106947\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-08.jpg?v=1759106947\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45936830120101,"sku":"96211","price":285.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/96211-1.jpg?v=1759106968"},{"product_id":"hamgeek-zynq7100-development-board-for-fpga-fmc-xc7z100-2ffg900-with-sd-card-and-card-reader","title":"HamGeek ZYNQ7100 Development Board for FPGA FMC XC7Z100-2FFG900 with SD Card and Card Reader","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- The RK-ZYNQ7100-F development board uses for ZYNQ7000 series XC7Z100-2FFG900. It integrates dual core ARM Cortex-A9 and FPGA programmable logic on one chip using ARM + FPGA SOC technology.\u003cbr\u003e- Adopting a full page design, it has expanded with rich peripheral interfaces.\u003cbr\u003e- This includes the core part consisting of ZYNQ7100 + 4 DDR3 + eMMC + QSPI FLASH.\u003cbr\u003e- The expanded interfaces include: two SFP+, two SATA, one PS ETH, one PLETH, onboard JTAG+UART 2-in-1, one four wire adjustable fan, one EEPROM, one MIPI, one HDMI-compatible input, one HDMI-compatible output, one SD CARD, one FMC HPC interface, one USB 2.0 HOST\/SLAVE, six PL LEDs, four PL KEYs, one 40PIN IO interface, and one PCIE2.0 x4 interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek Development Board\u003cbr\u003e- 1 x 12V 3A Power Adapter\u003cbr\u003e- 1 x Card Reader\u003cbr\u003e- 1 x SD Card\u003cbr\u003e- 2 x Type-C Cable\u003cbr\u003e- 2 x Sticker\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- This XC7Z100-2FFG900 is a second-hand chip.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-01.jpg?v=1759107381\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-02.jpg?v=1759107379\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-03.jpg?v=1759107379\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-04.jpg?v=1759107380\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-05.jpg?v=1759107380\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-06.jpg?v=1759107380\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-07.jpg?v=1759107426\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-08.jpg?v=1759107425\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45936838312101,"sku":"95592","price":419.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95592-1.jpg?v=1759107448"},{"product_id":"hamgeek-rk-zynq7020-f-zynq7020-development-board-for-fpga-fmc-40pin-io-support-for-ad9361-sub-card","title":"HamGeek RK-ZYNQ7020-F ZYNQ7020 Development Board for FPGA FMC 40Pin IO Support for AD9361 Sub Card","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- The RK-ZYNQ7020-F development board uses for Zynq7000 series chips, model XC7Z020CLG484-2. The ZYNQ7020 chip can be divided into two parts: the Processor System (PS) and the Programmable Logic (PL).\u003cbr\u003e- Adopting a full board design, it has expanded a rich range of peripheral interfaces, including DDR3, EMMC, QSPI, onboard JTAG+UART integration, SD card, USB2.0 HOST\/SLAVE, PS Gigabit Ethernet, PL Gigabit Ethernet RS485x2, FMC(LPC), CANx2, HDMI, MIPI, EEPROM, RTC, SPILCD, 40PIN IO, PS LED KEY, PL LED KEY.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek Development Board\u003cbr\u003e- 1 x 12V 3A Power Adapter\u003cbr\u003e- 1 x Card Reader\u003cbr\u003e- 1 x 32G SD Card\u003cbr\u003e- 1 x Type-C Cable\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-01.jpg?v=1759107599\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-02.jpg?v=1759107599\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-03.jpg?v=1759107599\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-04.jpg?v=1759107600\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-05.jpg?v=1759107599\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-06.jpg?v=1759107599\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-07.jpg?v=1759107638\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-08.jpg?v=1759107639\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45936840704165,"sku":"95593","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95593-1.jpg?v=1759107657"},{"product_id":"hamgeek-fmc-expansion-board-40-pin-expansion-port-module-fmc-to-gpio-fmc-sub-card-lpc-fl1010-for-znyq7020-zynq7100","title":"HamGeek FMC Expansion Board 40-Pin Expansion Port Module FMC to GPIO FMC Sub Card LPC FL1010 for ZNYQ7020\/ZYNQ7100","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- This sub card interface is a standard FMC LPC, suitable for ZYNQ7020, ZYNQ7100, XCZU15EG, and XCKU5P development boards in our store.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- When using other manufacturers' 40PIN matching modules, please pay attention to the IO level standard.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e- For example, when using a 40PIN 7-inch LCD screen module, the IO level of the module is generally 3V3, while the FMC IO level is generally 1V8 or 2V5. It is necessary to adjust the voltage of the FMC LA BANK on the development board to match the module, otherwise irreversible damage may occur.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek FMC Expansion Board\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-01.jpg?v=1759107827\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-02.jpg?v=1759107827\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-03.jpg?v=1759107827\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-04.jpg?v=1759107828\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-05.jpg?v=1759107828\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-06.jpg?v=1759107828\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-07.jpg?v=1759107871\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-08.jpg?v=1759107871\" alt=\"\"\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45936845619365,"sku":"95590","price":46.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/95590-1.jpg?v=1759107890"},{"product_id":"hamgeek-fmcomms8-software-defined-radio-dual-adr9009-rf-sub-board-mpsoc-development-board-kit-compatible-with-ad-fmcomms8-ezb-1","title":"HamGeek FMCOMMS8 Software Defined Radio Dual ADR9009 RF Sub Board + MPSOC Development Board Kit Compatible with AD-FMCOMMS8-EZB","description":"\u003cp\u003eIt is completely compatible with official AD-FMCOMMS8-EZB, more details:\u003cbr\u003e- \u003ca href=\"https:\/\/www.analog.com\/cn\/resources\/evaluation-hardware-and-software\/evaluation-boards-kits\/eval-ad-fmcomms8-ebz.html\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/www.analog.com\/cn\/resources\/evaluation-hardware-and-software\/evaluation-boards-kits\/eval-ad-fmcomms8-ebz.html\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e- It is an integrated RF design containing two Analog Devices ADRV9009 wideband transceivers. It complies with VITA 57.1 mechanical dimensions 84mm × 69mm, but not full compliance with keep out areas. This allows easy connection to a compatible FPGA development board that supports FMC HPC mechanical connector and JESD204B bus interface. It can be used for prototyping with up to 4 Transmit and Receive channels that can be synchronized in phase and frequency. Additionally it can be used with the ADRV9009-ZU11EG RF-SOM system allowing for 8 phase and frequency synchronized Transmit and Receive channels for complex multi-stream applications ensuring end-to-end deterministic latency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cbr\u003e- 3G, 4G, and 5G TDD macrocell base stations\u003cbr\u003e- TDD active antenna systems\u003cbr\u003e- Massive multiple input, multiple output (MIMO)\u003cbr\u003e- Phased array radar\u003cbr\u003e- Electronic warfare\u003cbr\u003e- Military communications\u003cbr\u003e- Portable test equipment\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvantages:\u003c\/strong\u003e\u003cbr\u003e- Quad transmitters\u003cbr\u003e- Quad receivers\u003cbr\u003e- Quad input Observation Receiver for DPD\u003cbr\u003e- Max Rx BW: 200MHz\u003cbr\u003e- Max Tunable Tx synthesis BW: 450MHz\u003cbr\u003e- Max Observation Rx BW: 450MHz\u003cbr\u003e- Tuning range: 75MHz to 6000MHz\u003cbr\u003e- Fully integrated fractional-N RF synthesizers\u003cbr\u003e- Multi-chip phase synchronization for all RF LO and baseband clocks\u003cbr\u003e- Includes schematics, layout, BOM, HDL, for Linux drivers and application software\u003cbr\u003e- Suitable for high channel density applications\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek SDR Board\u003cbr\u003e- 1 x MPSOC Development Board Kit\u003c\/p\u003e\n\u003cp\u003eThe following image shows the DEMO running on MPS0CTQ15EG+AD-FMCOMS8-EZB and the content of the serial port output:\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/97241-01.jpg?v=1759108078\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/97241-02.jpg?v=1759108078\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/97241-03.jpg?v=1759108078\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe following figure shows the signals collected by MPSOC connected to FMCOMMS8 running routine project, which were collected internally using ILA. Even numbered channels are the real part, odd numbered channels are the imaginary part (the imaginary part of the previous channel), and each 9009 has two channels, so there are a total of 8 channels in ILA. The two channels highlighted in red are waveforms collected from two 9009 chips, and it can be seen that their waveforms are basically the same.\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/97241-04.jpg?v=1759108078\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45936846766245,"sku":"97241","price":3790.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/97241-1.jpg?v=1759108108"},{"product_id":"hamgeek-zu19-high-performance-development-board-4k-hdmi-compatible-output-for-zu19_eval-ultrascale-mpsoc-zu19eg-development","title":"HamGeek ZU19 High Performance Development Board 4K HDMI-compatible Output for ZU19_Eval UltraScale + MPSOC ZU19EG Development","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- Support for LPC\/HPC\/FMC+\u003cbr\u003e- Rich image interface, can be extended to 4K HDMI-compatible output through QSFP28.\u003cbr\u003e- For Panasonic Megtron 6 board, with stable and high-speed performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaster Chip Specifications:\u003c\/strong\u003e\u003cbr\u003e- Chip model: XCZU19EG-FFVC1760-2-i\u003cbr\u003e- Clock recommended maximum speed: up to 775M for PLL\/MMCM\u003cbr\u003e- PS application processor model: four-core ARM Cortex-A53 1333MHz main frequency\u003cbr\u003e- PS real-time processor model: dual-core ARM Cortex-R5 533MHz main frequency\u003cbr\u003e- DDR specification model: DDR4, model of MT40A1G16TB-062E\u003cbr\u003e  PS terminal: 8GB capacity, 64bit, 2400M\u003cbr\u003e  PL terminal: 8GB capacity, 64bit, 2666M\u003cbr\u003e- Logic unit (LC): 1143K\u003cbr\u003e- Look-up unit (LUT): 523K\u003cbr\u003e- DSP unit multiplier: 1968pcs\u003cbr\u003e- Trigger (FlipFlops): 1045K\u003cbr\u003e- Block Ram: 34.6M Byte\u003cbr\u003e- Ultra Ram: 36M Byte\u003cbr\u003e- GTY (32.75G): 16pcs, 4 x Quad\u003cbr\u003e- GTH (16.3G): 32pcs, 8 x Quad\u003cbr\u003e- Component temperature range: -40℃ to 85℃\u003cbr\u003e- Speed level: -2\u003cbr\u003e- Chip level: industrial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZU19_EVAL Function Interface Description:\u003c\/strong\u003e\u003cbr\u003e- Power supply\/heat dissipation: powered through a dedicated TYPE-C interface, 9-12V DC-IN interface; The interface has PD 12V function. A GH1.25-3P 5V radiator interface.\u003cbr\u003e- Development board clock: 33.33M(PS), 50M(PL), 100M(PL), 26M(PS GTR), 27M(PS GTR), 100M(PS GTR), 156.25M(GTY), 125M(GTY).\u003cbr\u003e- Ethernet: two Gigabit RTL8211E-VL, one located in PS GEM3 and the other in PL.\u003cbr\u003e- USB interface: USB3.0 SLAVE \u0026amp; HOST, support USB2.0\u003cbr\u003e- Debugger: onboard UART + JTAG (JTAG maximum 30M) supports for ARM and FPGA development.\u003cbr\u003e- Onboard FLASH: 128M byte in total, two magnesium QSPI particles\u003cbr\u003e- SD card slot: PS SD1, 2.0 interface, bootable (SD supports up to 32GB)\u003cbr\u003e- EMMC: SD0 of PS, with a capacity of 32GByte\u003cbr\u003e- M.2 connector: one M.2 NVME (PCIE) interface, X1 bit width, on PS.\u003cbr\u003e- DP interface: a Mini DP interface, maximum support 4K at 30Hz, on DP.\u003cbr\u003e- High speed expansion interface: one SFF8654 interface, expanded 2 Quad GTY.\u003cbr\u003e- HDMI-compatible output interface: a HDMI-compatible output that uses LVDS to simulate IO direct connection, maximum 1080P at 60Hz.\u003cbr\u003e- HDMI-compatible input interface: one HDMI-compatible input for ADV7611, maximum support 1080P at 60Hz.\u003cbr\u003e- LED and buttons: power on\/off\/POR reset, PS\/PL button\/PL LED power status indicator\/DONE indicator, USB indicator, etc.\u003cbr\u003e- FMC interface: one FMC + interface female socket, full specification, LA+HA+HB+24GTH (16.3G)\u003cbr\u003e- Boot setting switch: a BOOT dip switch for initiating settings\u003cbr\u003e- High speed optical port: 2 QSFP28 100GE optical ports, GTY, maximum line rate of 28Gbps\u003cbr\u003e- Heat dissipation interface: one 5V heat dissipation interface, GH1.25-3P terminal\u003cbr\u003e- Camera interface: 1 x MIPI 2 Lane, FPC1.0-15P; 1 x MIPI 4 Lane, FPC0.5-24P\u003cbr\u003e- Note 1: Except for DC-IN which can provide power, all TYPE-C are suspended without power supply function, so there is no need to worry about accidental insertion.\u003cbr\u003e- Note 2: The PCB board is made of M6 board for Panasonic, with 20 layers of PCB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e- 1 x HamGeek Development Board\u003cbr\u003e- 1 x Type-C 2.0 Cable\u003cbr\u003e- 1 x Type-C 3.0 Cable\u003cbr\u003e- 1 x 12V\/3A Power Adapter\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/97649-01.jpg?v=1759108658\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HAMGEEK","offers":[{"title":"Default Title","offer_id":45936854597797,"sku":"97649","price":3159.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/files\/97649-1.jpg?v=1759108671"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/9318\/7237\/collections\/2_3ba5c17e-a0eb-4bf1-bf03-f9af0a90f3e8.jpg?v=1720750026","url":"https:\/\/www.hgeek.com\/ar\/collections\/software-defined-radio.oembed?page=7","provider":"HAMGEEK Official Store","version":"1.0","type":"link"}